ACT Z952 Manual de usuario
Speed Dome Camera
Hardware Manual
Z952
2021/11/17
www.acti.com
Hardware Manual
2
Table of Contents
Precautions 3
Regulatory Compliance............................................................................ 4
Safety and Compliance Information ..................................................... 5
Introduction 9
List of Models.............................................................................................. 9
Package Contents.................................................................................... 10
Physical Description............................................................................... 10
Installation Procedures 12
Prepare for Installation........................................................................... 12
Install Memory Card (Optional) ............................................................ 13
Mount on the Wall .................................................................................... 13
Waterproof Ethernet Cable.................................................................... 16
Waterproof Other Cables ....................................................................... 16
Reset the Camera 18
Access the Camera 19
www.acti.com
Hardware Manual
3
Precautions
Read these instructions
Read all the safety and operating instructions before using this product.
Heed all warnings
Adhere to all the warnings on the product and in the instruction manual. Failure to follow the
safety instructions given may directly endanger people, cause damage to the system or to
other equipment.
Servicing
Do not attempt to service this product yourself as opening or removing covers may expose you
to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
Trademarks
ACTi and ACTi logo are registered trademarks of ACTi Corporation. All other names and
products used in this manual are registered trademarks of their respective companies.
Liability
Every reasonable care has been taken during the writing of this manual. Please inform your
local office if you find any inaccuracies or omissions. ACTi will not be held responsible for any
typographical or technical errors and reserves the right to make changes to the product and
manuals without prior notice.
www.acti.com
Hardware Manual
4
Regulatory Compliance
FCC Part 15
This equipment has been tested and found to comply with the limits for digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own
expense.
This product complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause
undesired operation.
LVD/EMC Directive
This product complies with the European Low Voltage Directive 2014/35/EU
and EMC Directive 2014/30/EU.
WEEE Directive–2012/19/EU
The product this manual refers to is covered by the Waste Electrical &
Electronic Equipment (WEEE) Directive and must be disposed of in a
responsible manner.
Battery Directive-2013/56/EC
Battery in the product complies with the European Battery Directive
2013/56/EC. For proper recycling, return the battery to your supplier or to a
designated collection point.
www.acti.com
Hardware Manual
5
Safety and Compliance Information
Installation and removal of the unit and its accessories must be carried out by qualified
personnel. You must read all of the Safety Instructions supplied with your equipment before
installation and operation.
Installation
This device is a class Aproduct and may cause radio interference. Take measures if
necessary.
Make sure the camera operates in an environment where the temperature and humidity
meet requirements. Keep the camera from excessive pressure, vibration, moisture, dust,
and intensive electromagnetic radiation.
Use a power adapter or a PoE device that meets requirements. Otherwise, the device may
be damaged.
Make sure the length of the power cable between the power adapter and the camera is not
too long, otherwise the voltage of the camera is lowered, causing the camera to work
abnormally. If it is required to lengthen the power cable, lengthen the cable between the
power adapter and the mains.
Do not hold the tail cable by hand for weight bearing. Otherwise, the cable connector of the
camera could be loosened.
Do not cut the tail cable. Exposed tail cables may cause short circuit and damage the
camera.
When connecting to an external interface, use an existing connection terminal, and ensure
that the cable terminal (latch or clamp) is in good condition and properly fastened. Ensure
that the cable is not tense during mounting, with a proper margin reserved to avoid poor
port contact or loosening caused by shock or shake.
The end of the tail cable must be kept under good protection. Take waterproof measures to
protect the tail cable.
During the process of transportation, special attention is required for the protection of the
transparent dome cover to prevent friction, scratch and contamination, etc. In order to
keep the cover clean, do not remove the protective film on the cover during mounting. After
mounting is finished, remove the film before the device is powered on.
Contact professionals for maintenance information. Do not attempt to dismantle the device
by yourself. We shall not assume any responsibility for problems caused by unauthorized
repair or maintenance.
www.acti.com
Hardware Manual
6
Network Security
Please take all necessary measures to enhance network security for your device.
The following are necessary measures for the network security of your device:
Change default password and set strong password: You are strongly recommended to
change the default password after your first login and set a strong password of at least
nine characters including all three elements: digits, letters and special characters.
Keep firmware up to date: It is recommended that your device is always upgraded to the
latest version for the latest functions and better security. Visit our official website or contact
your local dealer for the latest firmware.
The following are recommendations for enhancing network security of your device:
Change password regularly: Change your device password on a regular basis and keep
the password safe. Make sure only the authorized user can log in to the device.
Enable HTTPS/SSL: Use SSL certificate to encrypt HTTP communications and ensure
data security.
Enable IP address filtering: Allow access only from the specified IP addresses.
Minimum port mapping: Configure your router or firewall to open a minimum set of ports to
the WAN and keep only the necessary port mappings. Never set the device as the DMZ
host or configure a full cone NAT.
Disable the automatic login and save password features: If multiple users have access to
your computer, it is recommended that you disable these features to prevent unauthorized
access.
Choose username and password discretely: Avoid using the username and password of
your social media, bank, email account, etc, as the username and password of your device,
in case your social media, bank and email account information is leaked.
Restrict user permissions: If more than one user needs access to your system, make sure
each user is granted only the necessary permissions.
Disable UPnP: When UPnP is enabled, the router will automatically map internal ports,
and the system will automatically forward port data, which results in the risks of data
leakage. Therefore, it is recommended to disable UPnP if HTTP and TCP port mapping
have been enabled manually on your router.
SNMP: Disable SNMP if you do not use it. If you do use it, then SNMPv3 is recommended.
Multicast: Multicast is intended to transmit video to multiple devices. If you do not use this
function, it is recommended you disable multicast on your network.
Check logs: Check your device logs regularly to detect unauthorized access or abnormal
operations.
Physical protection: Keep the device in a locked room or cabinet to prevent unauthorized
physical access.
Isolate video surveillance network: Isolating your video surveillance network with other
www.acti.com
Hardware Manual
7
service networks helps prevent unauthorized access to devices in your security system
from other service networks.
Safety Warnings
The device must be installed, serviced and maintained by a trained professional with
necessary safety knowledge and skills. Before you start using the device, please read through
this guide carefully and make sure all applicable requirements are met to avoid danger and
loss of property.
Storage, transportation, and use
Store or use the device in a proper environment that meets environmental requirements,
including and not limited to, temperature, humidity, dust, corrosive gases, electromagnetic
radiation, etc.
Make sure the device is securely installed or placed on a flat surface to prevent falling.
Unless otherwise specified, do not stack devices.
Ensure good ventilation in the operating environment. Do not cover the vents on the
device. Allow adequate space for ventilation.
Protect the device from liquid of any kind.
Make sure the power supply provides a stable voltage that meets the power requirements
of the device. Make sure the power supply's output power exceeds the total maximum
power of all the connected devices.
Verify that the device is properly installed before connecting it to power.
Do not remove the seal from the device body without consulting our company first. Do not
attempt to service the product yourself. Contact a trained professional for maintenance.
Always disconnect the device from power before attempting to move the device.
Take proper waterproof measures in accordance with requirements before using the
device outdoors.
Power Requirements
Installation and use of the device must be in strict accordance with your local electrical
safety regulations.
Use a UL certified power supply that meets LPS requirements if an adapter is used.
Use the recommended cordset (power cord) in accordance with the specified ratings.
Only use the power adapter supplied with your device.
Use a mains socket outlet with a protective earthing (grounding) connection.
Ground your device properly if the device is intended to be grounded.
www.acti.com
Hardware Manual
8
Battery Use Caution
When battery is used, avoid:
oHigh or low extreme temperatures during use, storage and transportation;
oExtremely low air pressure, or low air pressure at high altitude.
Use the battery properly. Improper use of the battery such as the following may cause risks
of fire, explosion or leakage of flammable liquid or gas.
oReplace battery with an incorrect type;
oDispose of a battery into fire or a hot oven, or mechanically crushing or cutting of a
battery;
Dispose the used battery according to your local regulations or the battery manufacturer's
instructions.
Maintenance
If there is dust on the front glass surface, remove the dust gently using an oil-free brush or
a rubber dust blowing ball.
If there is grease or a dust stain on the front glass surface, clean the glass surface gently
from the center outward using anti-static gloves or an oil-free cloth. If the grease or the
stain still cannot be removed, use anti-static gloves or an oil-free cloth dipped with
detergent and clean the glass surface gently until it is removed.
Do not use organic solvents, such as benzene or ethanol when cleaning the transparent
dome cover.
Never look at the transmit laser while the power is on. Never look
directly at the fiber ports and the fiber cable ends when they are
powered on.
Use of controls or adjustments to the performance or procedures
other than those specified herein may result in hazardous laser
emissions.
www.acti.com
Hardware Manual
9
Introduction
List of Models
This hardware manual contains the following models:
Z952
4MP Outdoor Speed Dome with D/N, Adaptive IR, Superior
WDR, SLLS, 25x Zoom Lens
www.acti.com
Hardware Manual
10
Package Contents
Contact your local dealer if the package is damaged or incomplete. The attachments may vary
with models, please see the actual model for details.
Camera
Power Adapter
Quick Installation Guide
Accessory Pack
Bracket Adapter Ring
Cable Gland
Physical Description
Tabla de contenidos
