ACS G series Manual de usuario
© Alcohol Countermeasure Systems Corp.
The information disclosed in this document is the valuable property of Alcohol Countermeasure
Systems Corp. and all copyright and other proprietary rights to this document are reserved. No
reproduction of this document is permitted without the prior written consent of Alcohol
Countermeasure Systems Corp.
FCC Disclaimer
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
To comply with RF exposure requirements, a separation distance of at least 20
cm must be maintained between the antenna(s) of the Electronic Control Unit
and all persons
This device complies with Part15 of the FCC Rules. Operations is subject to the
following two conditions: (1). this device may not cause harmful intereference,
and (2). this device must accept any intereference received, including
intereference that may casue undesired operation.
Safety and Precautions
G Series has been designed for easy and safe operation. The alcohol interlock is to be used only
for the purposes specified herein. To help ensure your safety, you must follow these precautions:
• In response to a retest request, carefully stop your vehicle at the side of the road. Complete a
successful breath test before you resume driving.
• Do not open the handset case. Doing so will potentially damage the components within and void
the warranty.
• Avoid exposing the handset to direct sunlight for extended periods of time.
• If liquid spills onto the handset, remove the excess with a cloth and allow the handset to dry
thoroughly. If there is substantial moisture damage, do not turn the handset on. Contact your
local service centre.
• Keep all radio frequency (RF) transmitting devices (such as cell phones) away from G Series to
minimize interference.
• Do not attempt to tamper with or circumvent G Series. This is considered a program violation.
Maintenance
During field use, G Series is susceptible to dirt and debris. Clean the handset with a damp cloth
and mild soap. Do not use abrasive cleaners or solvents.
Periodic service appointments are required. Consult your compliance guide for more
information.
Information and Support
For information and support, please contact your local service centre.
v
G Series User Guide
Table of Contents
Safety and Precautions .............................................................iii
Maintenance ..........................................................................iii
Information and Support ...........................................................iii
Getting Started 1
What is an alcohol interlock? ................................................... 1
How does it work? .................................................................. 1
User Fees ............................................................................... 2
Installation .............................................................................. 2
Maintenance .......................................................................... 2
Handset Configuration ............................................................. 2
Handset Cable ........................................................................ 3
To Disconnect ...................................................................... 3
To Connect .......................................................................... 3
More information .................................................................... 4
Alcohol Influence on Testing .................................................. 4
Operating Temperature ......................................................... 4
Battery Voltage .................................................................... 4
Using the Interlock 5
Starting the Motor ................................................................... 5
Warm-up and Standby (where applicable) ................................. 7
Restarting the Motor ................................................................ 8
Running retests ........................................................................ 9
Menu OPTIONS 11
Main Menu .......................................................................... 11
Shut down ......................................................................... 11
Sleep ................................................................................ 12
Calibration ........................................................................ 12
TABLE OF CONTENTS
vi G Series User Guide
Dates ................................................................................12
Language ..........................................................................12
Settings .............................................................................12
Bypass ..............................................................................13
Lockout Reset .....................................................................13
Test ...................................................................................13
Maintenance & Troubleshooting 15
Troubleshooting Table ............................................................ 15
Service Dates ........................................................................ 15
Error Messages ..................................................................... 16
Reset Codes .......................................................................... 18
Emergency Override (where applicable) ............................... 18
Third-Party Maintenance (TPM) ............................................. 18
Other ................................................................................18
Disposal of Unit at End of Service Life ...................................... 18
Replacement Parts ................................................................. 19
Index 21
Service Record 23
1
G Series User Guide
Getting Started
What is an alcohol interlock?
An Alcohol Interlock is an in-car breath alcohol
screening instrument. It prevents a vehicle from
starting if it detects that a driver’s breath alcohol
concentration (BrAC) is over a preset limit. It is
designed to fit inside the vehicle, near the driver’s
seat, and connects directly to the vehicle’s ignition
system.n
The interlock consists of a handset and an Electronic
Control Unit (ECU). The ECU enables and disables
the ignition of the motor and stores the handset
settings.
The G series handset can have a wired or wireless connection to the
ECU, depending on its version.
To help prevent other people from providing the required breath
samples, the interlock requests additional breath samples at random
intervals during the trip.
How does it work?
The G Series uses the same alcohol sensing technology used by police
in roadside screening. A special alcohol-sensitive cell detects the
amount of alcohol in the breath. Breath alcohol is directly
proportional to the blood alcohol concentration (BAC).
GETTING STARTED
2G Series User Guide
User Fees
Drivers who are subject to an alcohol interlock program are
responsible for all installation and maintenance costs. Refer to your
compliance guide for a complete list of costs.
Installation
Installation centres are conveniently located, and the interlock is
installed while you wait. You receive full training on site, and
technicians help to ensure that everything operates properly.
The interlock is installed by a qualified installer in accordance with
national regulations. An unqualified installation may invalidate the
type approval of the vehicle.
Maintenance
You must visit the installation centre a short time after installation. You
must also visit at certain intervals for maintenance and data
download. Maintenance appointments typically take less than 20
minutes.
Refer to your compliance guide for the interval dates.
Handset Configuration
There are two versions of the handset, a wired version and a wireless
version. The handset can have either a wired or wireless connection
with the ECU. The handset uses a single navigation button to scroll up,
down, right and left. Pressing the middle of the navigation button
selects the desired option.
3
G Series User Guide
Getting Started
Handset Cable
The handset cable connects the wired version of the handset to the
ECU, which in turn is connected to the vehicle’s ignition. This cable
can also be used to charge the wireless unit. The handset should
remain connected at all times, but follow these steps if the handset
needs to be removed:
To Disconnect
1. Make sure that the vehicle motor is off.
The handset cable consists of a connector and a
coiled cord.
2. Release the RJ-11 connector from the ECU
plug by pushing the connector lever down.
This disconnects the handset cable.
Warning! Do not pull on the handset cord or turn the connector. This could
damage the cable.
To Connect
1. With the vehicle motor off, locate the handset
cable plug in the ECU.
Note! If the vehicle’s motor is running, the ECU
beeps every 15 seconds.
2. Connect the RJ-11 connector to the ECU. You
should hear a light click when they connect
properly.
3. If the vehicle motor is running, a WAIT mes-
sage displays. G Series may require another
breath test. Observe the message on the dis-
play.
4G Series User Guide
More information
Alcohol Influence on Testing
Drinking alcohol and eating foods containing alcohol will cause a
failed alcohol test.
Some other factors that may affect a test (because they may contain or
produce residual alcohol in the mouth) are medicines, drops,
smoking, using mouthwash or mouth spray.
Rinsing the mouth with water after using mouthwash or mouth spray
will remove the alcohol content in the mouth.
According to the previous information, do not eat, smoke or drink for
at least 10 minutes before taking a test.
Additionally do not spray any air fresheners, disinfectants, cologne or
perfume in the vehicle prior to a test, as these can also contain
alcohol.
Note! The above mentioned list of factors that may affect a test is not
exhaustive. There are additional items that may affect the results of a breath
test. Follow this guide carefully to avoid incorrect results.
Operating Temperature
The maximum ambient operational temperature is between -45°C and
+85°C.
Note! Depending on the ambient temperature, the handset takes a few
seconds to warm up (approximately 15 seconds at 20°C, approximately
1 minute at 0°C).
Battery Voltage
The vehicle battery supplies the voltage to the ECU, which in turn
powers the handset.
For the 12V Interlock system, the vehicle battery voltage can range
from 9V - 18V. For a 24V Interlock system, the vehicle battery voltage
can range from 16V - 36V.
Tabla de contenidos
Otros manuales de Instrumento de medición de ACS
ACS
ACS USD 050 Manual de usuario
ACS
ACS SAF'IR EVOLUTION Manual de usuario
ACS
ACS A1270 EMAT Manual de usuario
ACS
ACS A1040 MIRA Manual de usuario
ACS
ACS A1207D Manual de usuario
ACS
ACS A1270 EMAT Manual de usuario
ACS
ACS Fluxicont FP Manual de usuario
ACS
ACS PenGauge A1207 Manual de usuario
ACS
ACS A1210 Manual de usuario
ACS
ACS PenGauge A1207 Manual de usuario
Manuales populares de Instrumento de medición de otras marcas
Endress+Hauser
Endress+Hauser Proline Promag 50 Especificaciones técnicas
Siemens
Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas
KLINGER
KLINGER CMF V Series Manual de usuario
EXFO
EXFO FTB-2 Manual de operación y mantenimiento
Keysight
Keysight M8290A Manual de usuario
ADTEK
ADTEK MW-5 Manual de usuario