Acrosser Technology ANR-C62 N1Series Manual de usuario
ANR-C62xN1 Series
2Acrosser Technology Co., Ltd.
Disclaimer
For the purpose of improving reliability, design and function, the information in
this document is subject to change without prior notice and does not represent a
commitment on the part of Acrosser Technology Co., Ltd.
In no event will Acrosser Technology Co., Ltd. be liable for direct, indirect, special,
incidental, or consequential damages arising out of the use or inability to use the
product or documentation, even if advised of the possibility of such damages.
Copyright
This document contains proprietary information protected by copyright. All rights are
reserved. No part of this manual may be reproduced by any mechanical, electronic,
or other means in any form without prior written permission of Acrosser Technology
Co., Ltd.
Trademarks
The product names appear in this manual are for identication purpose only. The
trademarks and product names or brand names appear in this manual are the
property of their respective owners.
Purpose
This document is intended to provide the information about the features and use of
the product.
Audience
The intended audiences are technical personnel, not for general audiences.
WARNING
Danger of explosion if batteries are incorrectly replaced. Always replace the
battery with the same specications. Dispose of used batteries according to the
manufacturer's instructions.
Before running the system, make sure the power cord is rmly plugged into the
socket.
CAUTION
IEC 60417-6042 (2010-11) IEC 60417-6172 (2012-09)
All power cords must be disconnected during product repair.
To read this User Manual on your smart phone, you will have to install an
APP that can read PDF le format rst. Please nd the APP you prefer from
the APP Market.
Ver: 100-002
Date: May 29, 2020
ANR-C62xN1 Series
3
www.acrosser.com
Table of Contents
1. Introduction ...................................................................5
1.1. Models........................................................................................................................ 5
1.2. Specications ............................................................................................................. 6
1.3. Packing List ................................................................................................................ 7
1.4. Layout & Dimension ................................................................................................... 8
1.5. Front Panel................................................................................................................. 9
1.5.1. Module A: Network expansion module connector........................................... 9
1.5.2. HDD Trays..................................................................................................... 13
1.5.3. SFP+ 10GbE LAN Ports ............................................................................... 13
1.5.4. LAN / Console / 2x USB 3.0 / Reset ............................................................. 14
1.5.5. LCM Display / Navigation Joystick / Indicators ............................................. 15
1.6. Rear Panel................................................................................................................ 16
2. Installation ...................................................................17
2.1. Package List............................................................................................................. 17
2.1.1. Screw List...................................................................................................... 18
2.2. Slide-rail Assembly ................................................................................................... 21
2.3. PCIe Card Installation............................................................................................... 25
3. BIOS Settings...............................................................30
3.1. Main Setup ............................................................................................................... 30
3.2. Advanced Setup ....................................................................................................... 31
3.2.1. Trusted Computing........................................................................................ 32
3.2.2. W83627DHG Super IO Conguration ........................................................... 32
3.2.3. W83627DHG HW Monitor............................................................................. 33
3.2.4. Serial Port Console Redirection.................................................................... 34
3.2.5. PCI Subsystem Settings ............................................................................... 35
3.2.6. USB Conguration ........................................................................................ 36
3.2.7. Network Stack Conguration ........................................................................ 36
3.2.8. CSM Conguration........................................................................................ 37
3.2.9. NVMe Conguration...................................................................................... 38
3.2.10. Intel(R) Virtual RAID on CPU Conguration.................................................. 38
3.3. Platform Conguration.............................................................................................. 39
3.4. Socket Conguration ................................................................................................ 39
3.4.1. Processor Conguration................................................................................ 40
3.4.2. Memory Conguration................................................................................... 40
ANR-C62xN1 Series
4Acrosser Technology Co., Ltd.
3.4.3. IIO Conguration ........................................................................................... 41
3.4.4. Intel. VT for Directed I/O (VT-d) Conguration .............................................. 42
3.5. Security Setup .......................................................................................................... 42
3.6. Boot Setup................................................................................................................ 43
3.7. Save & Exit Setup..................................................................................................... 44
4. Software Installation and Programming Guide...........45
4.1. Introduction............................................................................................................... 45
4.1.1. Environment .................................................................................................. 45
4.1.2. GPIO ............................................................................................................. 45
4.1.3. Watchdog ...................................................................................................... 45
4.1.4. LCD Control Module ..................................................................................... 45
4.1.5. Power Supply Unit ........................................................................................ 46
4.1.6. Chassis Opened............................................................................................ 46
4.2. File Descriptions....................................................................................................... 46
4.2.1. GPIO/Watchdog/LCD Control Module........................................................... 46
4.3. API List and Descriptions ......................................................................................... 47
4.3.1. GPIO ............................................................................................................. 47
4.3.2. Watchdog ...................................................................................................... 47
4.3.3. LCD Control Module...................................................................................... 48
4.3.4. Power Supply Unit (PMBUS) ........................................................................ 49
4.3.5. Pmbus Command Code Summary ............................................................... 50
4.3.6. Chassis Opened............................................................................................ 54
4.3.7. Notes............................................................................................................. 54
5. FAQ ...............................................................................56
Q 1. Where can I nd the serial number of this product?................................................. 56
ANR-C62xN1 Series
5
www.acrosser.com
1. Introduction
Acrosser’s brand new 2U rack mount server, ANR-C627/622N1 series, are designed
with X86 processor and positioned for Intel®Xeon-based 2U network appliances
which require high-performance computing (HPC) and multi-core (up to 28 cores)
with hyper-threading (HT) functionality for a wide range of workloads with high
memory bandwidth (DDR4-2666) and capacity.
ANR-C627/622N1 equipped with the latest generation Intel®Xeon®Scalable
processors are perfect for IoT Gateway, Edge Computing (EC), Cloud, Next
Generation Firewall (NGFW), IPS/IDS, Security Gateway (Se-GW), Unied Threat
Management (UTM) and Network Functions Virtualization (NFV). As excellence
network appliances, ANR-C627/622N1 series support dual-socket Intel®Xeon®
Scalable processors, 24* RDIMM/LRDIMM DDR4-2666, dual on-board SFP+
(10G ber) and 8* Expandable Network Interface Modules (NIMs) for 1G/10G/40G
(ber/Copper/Bypass) various options. Strong networking ability can meet most of
enterprise-class customers’ needs.
In addition, ANR-C627/622N supports 1+1 Redundant Platinum PSU, dual U.2
Non-volatile Memory Express (NVMe, PCIe Gen3 x4) SSDs or optional 4*2.5” hot-
swappable SATA-III HDDs and smart cooling fans enabling 24/7 operation and long-
term deployment.
1.1. Models
This manual is applied to the following models:
1. ANR-C627N1
2. ANR-C622N1
3. ANR-C627N1U
4. ANR-C622N1U
ANR-C62xN1 Series
6Acrosser Technology Co., Ltd.
1.2. Specifications
System
Thermal Solution • Hot-swappable PWM Smart Cooling Fans
CPU • Intel®Xeon®8280 (Platinum)
• Intel®Xeon®6265N (Gold)
• Intel®Xeon®5218N (Gold)
• Intel®Xeon®4216 (Silver)
• Intel®Xeon®3204 (Bronze)
System Memory • 24x RDIMM/LRDIMM DDR4
BIOS • Support Console Re-direction
• Support PXE Boot
System Chipset • Intel®PCH C627/C622
VGA Chipset • ASPEED®AST2510
Network Interface
Ethernet (on-board) • 2x 10G Fiber, SFP+[1:2] (via Intel®PCH C62x series)
• 1x RJ-45 Copper: LAN port
Storage
HDD Bay • ANR-C62xN1:
4x 2.5” SATA3 Hot-swappable (RAID 0/1/5/10)
• ANR-C62xN1U:
2x U.2 NVMe Hot-swappable (RAID 1)
mSATA • 1x mSATA Socket (Support full-size module)
CFast • 1x CFast Socket
Others
Watchdog Timer • Software Programmable 0 ~ 255 Secs.
Battery • Lithium Battery, 3V 220mAH (CR2032)
Hardware Monitoring • CPU Voltage
• CPU & SYS Temperature
• SYS FAN Speed
Security & Mgmt. • On-board TPM 2.0
• Chassis Intrusion Detection (default: Disable)
OS support • Linux Kernel 4.4 or above, (64-bit)
• DPDK for ANR-C62xN1(U) series
• QAT for ANR-C627N1(U) series
ANR-C62xN1 Series
7
www.acrosser.com
Mechanical & Environment
Chassis Dimension • 440 (W) x 88.5 (H) x 670 (D) mm
Operating Temperature • 0 ~ 40°C (32 ~ 104°F)
Storage Temperature • -20 ~ 80°C (-4 ~ 176°F)
Relative Humidity • 0 ~ 90% @40°C, non-condensing
Power Supply Unit • 1+1 CRPS 2U Redundant ATX PSU (800W)
Power Requirements • ATX Circuit as AT Mode with Power Switch
EMC & Safety
Certication • CE, FCC Class A, RoHS 2, cULus
Vibration Test • IEC 60068-2-64, 5~500Hz, 3GRMS
Drop Test • ISTA-2A 2006
1.3. Packing List
Check if the following items are included in the package.
Item Q’ty
�ANR-C62xN1 Series System 1
�SATA3 cable
(for ANR-C62xN1)
or SFF-8643 cable + SATA3 cable
(for ANR-C62xN1U)
4
2+2
�CD Utility 1
�RJ45-console cable (RJ45 <-> DB9) 1
�USB-console cable (Micro-B <-> Type A) 1
�Power Cord 2
�Rack Bracket 2
�Box Packing 1
�Screw Pack 1
�Slide Rail 1
ANR-C62xN1 Series
9
www.acrosser.com
1.5. Front Panel
1.5.1. Module A: Network expansion module connector
Available LAN Modules:
Note: The model name, type number, or layout design of these options might change due
to product revision.
1. ACC-NM1Z1-01C8B: 1G Copper x8 (RJ-45 w/ 4-pair Bypass)
2. ACC-NM1Z1-01C8: 1G Copper x8 (RJ-45)
Este manual sirve para los siguientes modelos
4
Tabla de contenidos
Otros manuales de Servidor de Acrosser Technology
Acrosser Technology
Acrosser Technology ANR-DNV3N3 Series Manual de usuario
Acrosser Technology
Acrosser Technology AND-APL1E Series Manual de usuario
Acrosser Technology
Acrosser Technology ANR-C236N1-K2D00 Manual de usuario
Acrosser Technology
Acrosser Technology ANR-SKB2N ACN Series Manual de usuario
Acrosser Technology
Acrosser Technology AR-R5800 Manual de usuario
Acrosser Technology
Acrosser Technology AAD-C622A Series Manual de usuario
Acrosser Technology
Acrosser Technology ANR-C62-N1 Series Manual de usuario
