acelerar T1 Manual de usuario
1
support@acelerar.net
Battery Powered
Security Camera
with Solar Panel
User Manual
www.acelerar.net
01
support@acelerar.net
Contents
Part 1 – Product Details 02
1.1 Product Introduction 02
1.2 Packing List 02
1.3 Keys and Indicator Light Instruction 03
Part 2 – Specification 04
Part 3 – Notice Before Using The Camera 05
Part 4 – Starting Using The Camera 06
4.1 Download The "CloudEdge" App 06
4.2 Power On The Camera 06
4.3 Account Sign Up (On CloudEdge App) 07
4.4 Add Device 07
4.5 How To Use The App 08
4.6 Install The Camera On The Wall 10
4.7 Install The Solar Panel 11
Part 5 – Function Instruction 13
5.1 App Interface Introduction 13
5.2 Settings 16
5.3 Personal Homepage 17
5.4 P2P User Sharing 18
5.5 Alert Settings 19
5.6 Alert Push Notification And Playback 20
Part 6 – Battery Management 21
Part 7 – How To Reduce False Alarms 21
Part 8 – Trouble Shooting 22
Part 9 – FAQ 23
Part 10 – FCC Statement 24
Part 11 – Warranty Information 25
support@acelerar.net
02
Part 1 – Product Details
1.1 Product Introduction
Lens
Microphone
Reset Key
TF Card
Slot
Power Key
Speaker
PIR
Photodiode
Type-C USB Port
Charging Indicator Light
Working Status
Indicator Light
IR LED
DC-5V
1.2 Packing List
1 * Battery
Camera
1 * Solar
Panel
1 * Metal Mount
(for solar panel)
1 * Type-C
Cable
2 * Screws
Sets
1 * Punch
Positioning Sticker
1 * User
Manual
1 * User
Quick Guide
User
Quick Guide
User
Manual
DQ
1 * NRRR
Card
1 * Video Guide
Card
Video Guide
Card
NRRR
Card
03
support@acelerar.net
1.3 Keys and Indicator Light Instruction
Camera Keys Operations
Power Key Press and hold for 5s for power on/off the camera
Power Key Quick press 1s to wake up the camera from standby mode
Reset Key Press and hold for 5s to reset/restore to factory settings
Reset Key Quick press 1 second to enter AP distribution network mode
Indicator Light Meaning
Slow Flickering Red Awaiting Wi-Fi connection and start adding devices
Fast Flickering Red Wi-Fi connecting
Solid on Red Network is abnormal
Solid on Blue Wi-Fi connected successfully, the camera running normally
Slow Flickering Blue AP mode
support@acelerar.net
04
Part 2 – Specification
Product Name Acelerar T1
Model DQ221
APP CloudEdge
Power Supply 5V 1A
WiFi Frequency Bands IEEE 802.11 b/g/n, 2.4GHz
Battery Type Li-ion
Battery Capacity 14400mAh/3.7V
Standby Life About 370 days (wake up 10 times per
day, 15 second every time)
Type-C Cable Length 1.5m
Resolution 1920*1080 Pixel
Horizontal Angle 336°
Vertical Angle 108°
Picture Sensor 2MP 1/2.9" progressive scan CMOS
LED IR Led & White LED
Antenna 3DBi * 2
Storage Maximum support 128G
Operation Temperature 14F° - 131F° (-10C° - 55C°)
Compatibility iOS & Android System
Water Resistance IP65
Solar Panel 3W
05
support@acelerar.net
Part 3 – Notice Before Using The
Camera
NOTICE Before Starting Using Acelerar T1
⊲ When start to add the camera to the Wi-Fi network, please make sure it’s under a full
Wi-Fi signal. (You can test with your smartphone)
⊲ Make sure connect the device to your smartphone (successfully monitored on app)
before installing on the wall.
⊲ This camera only supports 2.4GHz Wi-Fi router. Please make sure you are using 2.4GHz
Wi-Fi router (the same as the smartphone).
⊲ Wi-Fi password does not support special characters (Eg. * / @ $). Please reset the Wi-
Fi password only with English letters and numbers if the original password has special
characters.
⊲ Please install the camera under a stable Wi-Fi coverage area. If the Wi-Fi signal is
unstable in the place where you install it, we suggest purchasing an additional Wi-Fi
amplifier. Contact us at support@acelerar.net for more advises if necessary.
⊲ When binding the device, if you can NOT hear a “Buugo” tone and the indicator light
DOESN’T turn to blue (which mean the binding is NOT successful), please hold the reset
button for 5 seconds. After hearing the “Buugo” tone, please try to scan the QR code
and bind again.
If you need any help when installing or using the camera, here are the ways to follow:
1. Read this quick guide or our manual.
2. View the installing video guide
at acelerar.net/videoguide
3. Consult our customer service by
starting a live chat atacelerar.net
(Mon-Fri 8:00 am - 5:00 pm pst)
4. Download the Full User Manual
at acelerar.net/manual
5. Consult our customer service by
emailing us at support@acelerar.net
(reply in 12 working hours).
support@acelerar.net
06
Part 4 – Starting Using The Camera
Now Let Start Using the Acelerar T1!
4.1 Download The "CloudEdge" App
1. Search "CloudEdge" on Apple Store (iOS)
or Google Play (Android) to download the app.
2. Use the phone camera to scan the
following QR code to download
the "CloudEdge" app.*
* Only support iOS 8.0 or higher version for iOS, Android 10.0 or higher version for
Android.
4.2 Power On The Camera
When you receive the device, it may has only 20%-30% battery. We suggest you charge
it for 1-2 hours before binding the device. Or binding the device by connecting the power
all the times. (Power adapter in not included)
⊲ Press the “Power” button for 5 second to power on the camera, a “de~de~de~” tone
will sound and the indicator light will turn into slow flickering red.
Press and hold
for 5s topower on
07
support@acelerar.net
4.3 Account Sign Up (On CloudEdge App)
1. Open the app and click Sign up.
2. Enter your email or phone number, click send verification code.
3. Get the verification code from your email or message, input it and set up the password
4. Sign in with the account and password.
4.4 Add Device
Before Adding the Device:
1. Connect your phone to 2. 4G Wi-Fi (5G is not supported)
2. Wi-Fi password does not support special characters (Eg. * / @ $). Please reset the Wi-Fi
password only with English letters and numbers.
3. Make sure the Wi-Fi signal is full.
Adding the Device
STEP 1: Open "CloudEdge" App.
STEP 2: Click "+" in the middle or right-top to add the camera.
STEP 3: Click "Camera".
STEP 4: Power on the device and click "Next". (Press and hold " " for 5s to power on)
STEP 5: Press and hold the "reset" button for 5 seconds, a "Boogu" tone will sound, then
click "Next".
STEP 6: Select 2.4GHz Wi-Fi SSID and input Wi-Fi password, click "Next" and "OK".
STEP 7: Read the operation instructions and click "Next".
STEP 8: A QR code will show up on the smartphone. Use the camera to scan the QR
code. Please follow the advice in the app.
Before scanning the QR code, please
make sure the indicator light is flickering
red. If not, please try as follow:
• Press power button to wake up the
camera.
• Press and hold reset button for 5s until
hearing the "buugo" sound.
STEP 9: If the scanning is successful, a "buugo"
tone will sound and the indicator light will turn
into blue. Click "Next" and the camera will start Reset Button
support@acelerar.net
08
the auto binding and configuration.
STEP 10: Rename your camera by clicking " " and click "Done".
STEP 11: A "Tips" window will show up, click "Enter" to read the tips or just cancel it.
Now the Camera is Ready!
If you still can’t bind the camera, please contact us at support@acelerar.net for more
advises.
4.5 How To Use The App
Press anywhere on the camera screen to enter the Live View.
: Rename the camera.
: Sound option.
SD/HD: Change the resolution.
: Tap this icon to enter the full-screen mode.
Live: Live viewing mode.
History: History mode.
Cloud: Cloud mode.
: Tap this to take a photo of the live view.
: Long press to start a live conversation.
: Tap this to record live video.
: Set up the motion detection.
: Tap this to adjust the monitoring area.
: Open the phone album.
09
support@acelerar.net
Tabla de contenidos
