Accton Technology MR3202A Manual de usuario

WA6102-ZZ

MR3202A

IEEE 802.11b/g Mini AP Router

User Guide

Guide

802.11b/g Mini AP Router

IEEE 802.11b/g Wireless Router

MR3202A

E062007-EK-R01

149100038500E

Table of Contents

Chapter 1: Introduction 1-1

Package Checklist 1-1

Hardware Description 1-2

LED Indicators 1-3

Ethernet RJ-45 Ports 1-3

Power Socket 1-4

Reset Button 1-4

WPS SET Button 1-4

Chapter 2: Installation 2-1

Router Mode 2-1

Bridge Mode 2-2

Chapter 3: Network Planning 3-1

Internet Gateway Router 3-1

LAN Access Point 3-2

Wireless Client 3-2

Wireless Bridge 3-3

Chapter 4: Initial Configuration 4-1

Logging into the Web Interface 4-2

Using the Setup Wizard 4-4

Chapter 5: System Configuration 5-1

System 5-3

Settings 5-3

Password 5-4

Backup and Restore 5-5

DynDNS Settings 5-6

Syslog Settings 5-7

Firmware Upgrade 5-8

WAN 5-9

WAN Settings 5-9

LAN 5-11

LAN Settings 5-11

Contents

Wireless1 5-13

Wireless-VAP1 Settings 5-13

MAC Filter Settings 5-18

Wireless2 5-19

Wireless-VAP2 Settings 5-19

WMM Settings 5-20

QoS 5-21

QoS Settings 5-21

Advanced Settings 5-22

DMZ 5-24

Status 5-25

System 5-25

Interfaces 5-26

Events Log 5-27

DHCP Clients 5-28

PPPoE 5-28

Wireless Stations 5-29

About 5-29

Reboot 5-30

Appendix A: Troubleshooting A-1

Appendix B: Specifications B-1

Appendix C: License Information C-1

The GNU General Public License C-1

Glossary

1-1

Chapter 1: Introduction

The Mini AP Router is an IEEE 802.11b/g wireless gateway router that connects your

Internet access device (cable or ADSL modem) to your PC or local area network, or to

its own secure wireless network.

The Mini AP Router can be automatically configured with other Wi-Fi Protected

Setup (WPS) devices by simply pressing its WPS SET button. For more detailed

configuration, the unit can also be set up through its easy-to-use web interface.

Package Checklist

The Mini AP Router package includes:

• Mini AP Router (MR3202A)

• RJ-45 Category 5 network cable

• AC power adapter

• Quick Installation Guide

• User Guide CD

Inform your dealer if there are any incorrect, missing or damaged parts. If possible,

retain the carton, including the original packing materials. Use them again to repack

the product in case there is a need to return it.

Introduction

1-2

Hardware Description

Top Panel

Bottom Panel

Ethernet WAN

RJ-45 Port

Power

Socket

Antenna

Ethernet LAN

RJ-45 Port

WPS SET Button

Reset Button

Wall Mount Slots

Hardware Description

1-3

LED Indicators

The

Mini AP Router

includes four status LED indicators, as described in the following

figure and table.

Ethernet RJ-45 Ports

The

Mini AP Router

has one RJ-45 LAN port and one RJ-45 WAN port.

• The RJ-45 LAN port is for connection to a PC or to a 10/100 Mbps.

• The RJ-45 WAN port is for connection to a DSL or cable modem, or to a LAN or

other device that provides your Internet access.

Both ports auto-negotiate the operating speed to 10/100 Mbps, the mode to half/full

duplex, and the pin signals to MDI/MDI-X. Automatic MDI/MDI-X support enables

you to use straight-through cables for all network connections to PCs, switches, or

hubs.

LED Status Description

POWER On Green Indicates that the system is working normally.

WAN On/Flashing Green Indicates a valid link on the WAN Ethernet port. Flashing indicates

network activity.

Off The Ethernet port has no valid link.

LAN On/Flashing Green Indicates a valid link on the LAN Ethernet port. Flashing indicates

network activity.

Off The Ethernet port has no valid link.

WLAN On/Flashing Green Indicates the 802.11b/g radio is enabled. Flashing indicates

wireless network activity.

Off Indicates the 802.11b/g radio is disabled.

Power

LAN Link/Activity

802.11b/g Link/

Activity

WAN Link/Activity

Introduction

1-4

Power Socket

The

Mini AP Router

does not have a power switch. It is powered on when connected

to the AC power adapter, and the power adapter is connected to a power source.

The power adapter automatically adjusts to any voltage between 100-240 volts at 50

or 60 Hz. No voltage range settings are required.

Reset Button

The Reset button can be used to restart the Mini AP Router or restore the factory

default configuration. If you press the button for less than 5 seconds, the

Mini AP

Router

will restart. If you press and hold down the button for 5 seconds or more, any

configuration changes you may have made are removed and the

Mini AP Router

restored to its factory default configuration.

WPS SET Button

Use the WPS SET button on the Mini AP Router to automatically connect multiple

devices to the network. Within two minutes, press the physical or virtual button on

wireless client devices to enable them to join the WLAN.

The WPS configuration process may be initiated on any device and there is no

restriction to the order in which buttons are pressed.

Note: Any WPS-compatible devices could unintentionally join the WLAN if they are

within range during the two-minute set up period after the WPS SET button is

pressed.

Tabla de contenidos

Otros manuales de Enrutador de red de Accton Technology

Accton Technology

Accton Technology Edge-Core VR-200 Manual de usuario

Accton Technology

Accton Technology cheetahswitch workgroup-3024c Manual de usuario

Accton Technology

Accton Technology Fast SwitcHub-8mi SNMP Manual de usuario

Accton Technology

Accton Technology CheetahSwitch Workgroup-3514F Manual de programación

Accton Technology

Accton Technology Fast SwitchHub-8mi SNMP Manual de usuario

Accton Technology

Accton Technology MR3201A Manual de usuario

Accton Technology

Accton Technology ES3508-TX Manual de usuario

Accton Technology

Accton Technology 3008A Manual de usuario

Accton Technology

Accton Technology ES3005 Manual de usuario

Accton Technology

Accton Technology Edge-Core ES3528M-SFP Manual de usuario

Accton Technology

Accton Technology Edge-corE EC3805 Manual de usuario

Accton Technology

Accton Technology ES3016C Manual de usuario

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

Billion

Billion BIPAC 5102 Series Manual de usuario

TP-Link

TP-Link TD-8817 Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

Cisco

Cisco NCS 540 Manual

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

Cisco

Cisco ASR 1000 Series Manual del operador

EnGenius

EnGenius ESR-9710 Manual de usuario

Cisco

Cisco 805 Series Instrucciones de funcionamiento y seguridad