ABSCO SHEDS PPCK-PTX Manual de usuario

Absco Industries Assembly Instruction Manual

ABSCO POOL PUMP COVER

MODEL: PPCK-PTX

5’ W x 5’ D x 4’ 10” H

Model: PPCK-PTX 1.0 1

27/4/23

We highly recommend downloading the Absco Sheds

Assembly App to assist with your build.

ASSEMBLY APP AVAILABLE ON

Scan to

download

STEP BY STEP ASSEMBLY VIDEOS • PARTS CHECKLISTS • FAQ • 7 DAY

CUSTOMER SERVICE • WARRANTY INFORMATION • COUNCIL FORMS

We highly recommend downloading the Absco Sheds

Assembly App to assist with your build.

ASSEMBLY APP AVAILABLE ON

Scan to

download

STEP BY STEP ASSEMBLY VIDEOS • PARTS CHECKLISTS • FAQ • 7 DAY

CUSTOMER SERVICE • WARRANTY INFORMATION • COUNCIL FORMS

AU: 1800 029 701

N Z: 0800 466 444

[email protected]

www.abscosheds.com.au

+1 (866) 788 3046 [email protected]

www.abscogardensheds.com

+1 (866) 788 3046 PLEASE LEAVE A REVIEW

www.abscosheds.com.au/review

Absco Industries Assembly Instruction Manual

ABSCO POOL PUMP COVER

MODEL: PPCK-PTX

5’ W x 5’ D x 4’ 10” H

Model: PPCK-PTX 1.0 2

27/4/23

1-2 people Approx. 4 hours

Hammer drill Shifter

metal & masonry drill bits

to suit anchor fasteners

Pop riveter

SUPPLIED

Cordless drill

GENERAL INSTRUCTIONS

• Before commencing any assembly, read

through these instructions in detail to gain

a thorough understanding of assembly

methods and associated details.

• Unpack the carton and carefully identify

and check off all the parts against the

parts described and illustrated on

"COMPONENTS PACKING LIST" pages.

SITE PREPARATION

• The site for the shed must be level. An

uneven surface may result in misalignment

of parts.

• The shed shall be erected on top of a

reinforced concrete slab and anchored

down appropriately illustrated on “FINAL

CONSTRUCTION” page.

SAFETY NOTES

• Some parts may have sharp edges. It is

advisable to wear gloves when handling these

items and safety glasses if drilling holes.

Sensible shoes are highly recommended.

• Do not erect your shed in windy conditions.

• Ensure that the shed is securely anchored

to a solid foundation immediately after

construction is completed.

• It is highly recommended to erect the shed

with two or more people.

• Do not sit, stand or walk on the roof of your

shed.

Tinsnips

NUMBER OF HOURS REQUIRED

ASSEMBLY DIFFICULTY

NUMBER OF PEOPLE REQUIRED

Basic Complex

TOOLS REQUIRED

RECOMMENDED

Personal protective

equipment for tools

Hand

Protection

Enclosed

Shoes

Raised work surface. EG

Sawhorses and timbers

Heavy and/or bulky. Multi-

person lift or mechanical aid.

3/16” drill bit

Absco Industries Assembly Instruction Manual

ABSCO POOL PUMP COVER

MODEL: PPCK-PTX

5’ W x 5’ D x 4’ 10” H

Model: PPCK-PTX 1.0 3

27/4/23

QTY DESCRIPTION PART # CHK

2STEEL SHEET

57.5 x 30.4” PPB

STEEL SHEET

54.9” TO MIDPOINT

x 30.4”

PPG

STEEL SHEET

49.8” TO MIDPOINT

x 30.4”

PPL

STEEL SHEET

54.9” TO MIDPOINT

x 30.4”

PPD

QTY DESCRIPTION PART # CHK

1CHANNEL

59.6” 57A

1CHANNEL

59.6” 53B

2CHANNEL

59.6” 81F

2CHANNEL

60.2” 81N

4CHANNEL

59.6” 81E

1JAMB

44” 91A

1JAMB

43.3” 94C

1JAMB

30.8” 90C

4LIP

9” 88D

QTY DESCRIPTION PART # CHK

STEEL SHEET

49.8” TO MIDPOINT

x 30.4”

PPR

2STEEL SHEET

63.8” x 30.4” PPA

1STEEL SHEET

44.9” x 30.4” PPC

1STEEL SHEET

47.3” x 28” PPF

QTY DESCRIPTION PART # CHK

1CHANNEL

30.8” 79C

1CHANNEL

47.2” 64C

1CHANNEL

44.9” 64A

1CHANNEL

44.9” 64B

2CHANNEL

30.4” 58C

1JAMB

47.3” 94A

1JAMB

47.3” 94B

2JAMB

58.3” 94D

MIDPOINT

MIDPOINT MIDPOINT

Nominal sheet widths are shown

+/- 0.08” is within tolerance

COMPONENTS LIST

Absco Industries Assembly Instruction Manual

ABSCO POOL PUMP COVER

MODEL: PPCK-PTX

5’ W x 5’ D x 4’ 10” H

Model: PPCK-PTX 1.0 4

27/4/23

FITTINGS PACK

QTY DESCRIPTION No. CHK QTY DESCRIPTION No. CHK

2.5”

BUTT HINGE

6 HOLE

FAST

012A 1

PADBOLT

SUPPORT

PLATE

22C

1DOOR

PLATE 12A 58G x 3/4” SELF

TAPPING SCREW

FAST

013

30 SBS43E POP

RIVET

FAST

009 30 3/16” COUNTERSUNK

BOLTS & NUTS

FAST

004

FAST

005

1DOUBLE DOOR

FITTINGS PACK

PSTK

DBL 3PADBOLT FAST

006

8G x 3/8” SELF

TAPPING SCREW

x 220

PACK

220 2PADBOLT

HASP

FAST

007

11/8”

DRILL BIT DRILL 1 PHILLIPS HD

DRIVER BIT

FAST

038

3/16” ROUND HD

BOLTS &

NYLOCK NUTS

FAST

002

FAST

003

12 3/16” COUNTERSUNK

BOLTS & NUTS

FAST

004

FAST

005

Absco Industries Assembly Instruction Manual

ABSCO POOL PUMP COVER

MODEL: PPCK-PTX

5’ W x 5’ D x 4’ 10” H

Model: PPCK-PTX 1.0 5

27/4/23

COMPONENT OVERVIEW

22A

22C

81E

88C

PPA

94D

88D

81E

PPG

81E

64C

PPL

90C

PPD

PPR

94A

22A

PPB

88C

94C

PPB

81F

81N

PPF

81N

94B

79C

53B

91A

12A 58C

64A

81E

58C

64B

PPC

57A

81F

Most holes are prepunched.

A 1/8” drill bit is supplied for

drilling holes where prepunching

was not possible.

Absco Industries Assembly Instruction Manual

ABSCO POOL PUMP COVER

MODEL: PPCK-PTX

5’ W x 5’ D x 4’ 10” H

Model: PPCK-PTX 1.0 6

27/4/23

PAGE 12

ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30152GK 13/04/16

Premier Garden Shed

Model: 30152GK

INSTRUCTIONS

AND VIDEOS

ABSCO ASSEMBLY INTRODUCTION

FASTENING SYMBOLS

The snaptite assembly system locks most perimeter channels to all roof and wall

sheets without the need for tools and fasteners.

To pre-assemble the four wall panels

and two roof panels, the perimeter

channels are secured to the top and

bottom of each panel using the

snaptite system, as detailed on the

following pages wherever you see

the symbol.

Position sheets on timbers,

trestles or partly over edge of

concrete slab.

Each perimeter channel must finish flush with the

edges of the sheets.The snaptite system allows

adjustment for this process by simply tapping the

channel along the sheets until each end is neatly

flush. If you need to remove channels from the

panels, pull the channel along the panel from

opposing ends. You may need someone to help

with this.

Join components together with one screw at this

location only, as some channel sections have extra

holes that are not required for this model of garden

shed

Do not join components together at this location yet,

as the screw may obstruct further assembly of other

components

4mm NUT & BOLT SET

3mm POP RIVETS

PUSH

HIGH SIDE

PUSH

HIGH SIDE

After joining sheets together, position channel over one end of the sheets, gently

tapping it over the snaptite lugs, working along the sheets to the other end.

HIGH SIDE

SNAP

T TE

SNAP

T TE

SNAP

T TE

Join components together by pre-drilling the holes

first. Use one component as a template to mark where

the holes are. Drill with 3mm drill bit.

Absco Industries Assembly Instruction Manual

ABSCO POOL PUMP COVER

MODEL: PPCK-PTX

5’ W x 5’ D x 4’ 10” H

Model: PPCK-PTX 1.0 7

27/4/23

1. Layout and overlap two PPB

sheets by one rib as shown.

You’ll need to turn one 180

degrees.

Align them so the two rib holes

overlap and the edge holes are

to the outsides.

2. Fasten with 3/8” self tapping

screws through prepunched

sheet-to-sheet holes on overlap.

If you can’t see bottom hole twist

the sheet left or right.

Make a new hole with supplied

drill bit if bottom hole is too far

up or down the sheet or not

found.

3. Attach the top and bottom

channels using the SNAP-TiTE

method.

Make sure you have the short

side of the channel to the

outside of the sheeting

REAR PANEL ASSEMBLY

81F

edge holes to outside

- This completes the rear panel -

1 required

FAST001

PPB

Absco Industries Assembly Instruction Manual

ABSCO POOL PUMP COVER

MODEL: PPCK-PTX

5’ W x 5’ D x 4’ 10” H

Model: PPCK-PTX 1.0 8

27/4/23

LID PANEL ASSEMBLY 1. Overlap speciﬁed sheets as

shown. Make sure ends are ﬂush.

Where possible, keep sheets in

the same orientation from the

box.

2. Fasten with self tapping

screws through prepunched

sheet-to-sheet holes on overlap.

If you can’t see bottom hole twist

the sheet left or right.

Make a new hole with supplied

drill bit if bottom hole is too far

up or down the sheet or not

found.

3. Attach the top and bottom

channels using the SNAP-TiTE

method.

Make sure you have the short

side of the channel to the

outside of the sheeting

PPA

81E

88C

81E

SNAP

T TE

SNAP

T TE

88C

4. Attach the 88C lips to the

ends, place the face with the

holes on top of the sheet.

Fasten each using ﬁve FAST001

3/8” self tapping screws into the

prepunched holes.

FAST001

Absco Industries Assembly Instruction Manual

ABSCO POOL PUMP COVER

MODEL: PPCK-PTX

5’ W x 5’ D x 4’ 10” H

Model: PPCK-PTX 1.0 9

27/4/23

94C

94D

22C

Let’s assemble the lid bracing

5. Join all components at

prepunched locations as shown

6. Position the lid bracing on the

underside of lid as shown.

Drill through the prepunched

holes of the lid bracing into the

sheeting and secure with 3/8”

self tapping screws.

7. fasten the padbolt to plate

2” off centre to allow the bolt to

lock under the top channel of the

front panel next to the door.

LID PANEL ASSEMBLY

CONTINUED

- This completes the lid panel -

0.8” face

to top

2”

3.1”

0.6” face

to base

Absco Industries Assembly Instruction Manual

ABSCO POOL PUMP COVER

MODEL: PPCK-PTX

5’ W x 5’ D x 4’ 10” H

Model: PPCK-PTX 1.0 10

27/4/23

RIGHT PANEL ASSEMBLY

2. Make sure the ends of the

sheets are ﬂush at overlap before

continuing.

Fasten with 3/8” self tapping

screws through prepunched

sheet-to-sheet holes on overlap.

1. Layout and overlap the two

sheets by one rib as shown.

orientate them so the two rib

holes overlap and angled end of

the sheets are both to the top.

3. Attach the top and bottom

channels using the SNAP-TiTE

method.

Make sure you have the short

side of the channel to the

outside of the sheeting

Angled ends to top

PPR

PPD

FAST001

81N

81E

SNAP

T TE

SNAP

T TE

- This completes the right panel -

Tabla de contenidos

Otros manuales de Almacenamiento al aire libre de ABSCO SHEDS

ABSCO SHEDS

ABSCO SHEDS 30082SECOK Manual de usuario

ABSCO SHEDS

ABSCO SHEDS CYCHK Guía de instalación

ABSCO SHEDS

ABSCO SHEDS PPCK Guía de instalación

ABSCO SHEDS

ABSCO SHEDS 30151SK Manual de usuario

ABSCO SHEDS

ABSCO SHEDS 23081SK-PTX Manual de usuario

ABSCO SHEDS

ABSCO SHEDS 60303WK Manual de usuario

ABSCO SHEDS

ABSCO SHEDS 1508WBCK Manual de usuario

ABSCO SHEDS

ABSCO SHEDS J30152S Manual de usuario

ABSCO SHEDS

ABSCO SHEDS 30152SK-PTX Manual de usuario

ABSCO SHEDS

ABSCO SHEDS 30153BK-PTX Manual de usuario

ABSCO SHEDS

ABSCO SHEDS J15231FK Manual de usuario

ABSCO SHEDS

ABSCO SHEDS J30232G Manual de usuario

ABSCO SHEDS

ABSCO SHEDS 30222RK Manual de usuario

ABSCO SHEDS

ABSCO SHEDS MN3060UTK Manual de usuario

ABSCO SHEDS

ABSCO SHEDS REGENT 23221RK Manual de usuario

ABSCO SHEDS

ABSCO SHEDS 30152GK Guía de instalación

ABSCO SHEDS

ABSCO SHEDS AWN33 Manual de usuario

ABSCO SHEDS

ABSCO SHEDS ABSCO PREMIER SHED Manual de usuario

ABSCO SHEDS

ABSCO SHEDS Premier Manual de usuario

ABSCO SHEDS

ABSCO SHEDS 2308WBCK Manual de usuario

ABSCO SHEDS

ABSCO SHEDS 60303WK Manual de usuario

ABSCO SHEDS

ABSCO SHEDS 45232WK Manual de usuario

ABSCO SHEDS

ABSCO SHEDS 3045UTK Guía de instalación

ABSCO SHEDS

ABSCO SHEDS 3060HG Manual de usuario

Manuales populares de Almacenamiento al aire libre de otras marcas

USP

USP DURAMAX 10 Ft x 8 Ft StoreMax Plus Manual de usuario

TYGO

TYGO Nyland Manual de usuario

Duratuf

Duratuf GL105 Manual de usuario

Viking

Viking SD5300SS Manual técnico

USP

USP DURAMAX Apex Pro 10.5 Ft x 8 Ft 40116 Manual de usuario

ModuLaro

ModuLaro Lojo WC202200 Manual de usuario

Lifetime

Lifetime 6418 Manual de usuario

rollaway container

rollaway container ARPCA24 Manual de usuario

Duratuf

Duratuf Havelock Manual de usuario

X-METAL

X-METAL 4065 Manual de usuario

Outdoor Life Products

Outdoor Life Products FP2030 F Manual de usuario

Royalcraft

Royalcraft Faro 295L Storage Box Manual de usuario

Riverlea

Riverlea Duratuf KIWI KS3 Manual de usuario

OLT

OLT GS84D-FJ-Plywood Manual de usuario

Rubbermaid

Rubbermaid 5L45 Manual de usuario

garofalo

garofalo TUSCANY EVO Manual de usuario

Duratuf

Duratuf Kiwi MK1 Manual de usuario

Eden

Eden CA2988 Manual de usuario