ABSCO SHEDS 30153BK-PTX Manual de usuario

Absco Industries Assembly Instruction Manual

ABSCO BIKE SHED

MODEL: 30153BK-PTX

10’ W x 5’ D x 5’11”H, 6’10”H

Model: 30153BK-PTX 29/06/2022 1.0 1

Australian Made

CONCRETE

SLAB

We highly recommend downloading the Absco Sheds

Assembly App to assist with your build.

ASSEMBLY APP AVAILABLE ON

Scan to

download

STEP BY STEP ASSEMBLY VIDEOS • PARTS CHECKLISTS • FAQ • 7 DAY

CUSTOMER SERVICE • WARRANTY INFORMATION • COUNCIL FORMS

AU: 1800 029 701

N Z: 0800 466 444

[email protected]

www.abscosheds.com.au

+1 (866) 788 3046 [email protected]

www.abscogardensheds.com

+1 (866) 788 3046 PLEASE LEAVE A REVIEW

www.abscosheds.com.au/review

When laying a concrete slab for your shed, it is

best practise to have a rebated edge to prevent

water ingress.

Rebated section is 1” high and inset 3” on all sides

from the overall slab base dimensions

Overall slab base

dimensions for this

model are as shown

above.

Illustration not to

scale.

1”

3”

RAISED FLOOR

INSIDE SHED

4”

3”

WALLS SIT

ON THIS LEVEL

10’ 2”

5’ 4”

4”

Absco Industries Assembly Instruction Manual

ABSCO BIKE SHED

MODEL: 30153BK-PTX

10’ W x 5’ D x 5’11”H, 6’10”H

Model: 30153BK-PTX 29/06/2022 1.0 2

Australian Made

2 - 3 people Approx. 7 hours

NUMBER OF HOURS REQUIRED

ASSEMBLY DIFFICULTY

NUMBER OF PEOPLE REQUIRED

Basic Complex

TOOLS REQUIRED

RECOMMENDED

Personal protective

equipment for tools

Hand

Protection

Enclosed

Shoes

Raised work surface. EG

Sawhorses and timbers

Heavy and/or bulky. Multi-

person lift or mechanical aid.

5/16” Hex driver bit

Ladder Hammer drill Shifter

metal & masonry drill bits

to suit anchor fasteners

Pop riveterCordless drill

GENERAL INSTRUCTIONS

• Before commencing any assembly, read

through these instructions in detail to gain

a thorough understanding of assembly

methods and associated details.

• Unpack the carton and carefully identify

and check off all the parts against the

parts described and illustrated on

"COMPONENTS PACKING LIST" pages.

SITE PREPARATION

• The site for the shed must be level. An

uneven surface may result in misalignment

of parts.

• The shed shall be erected on top of a

reinforced concrete slab and anchored

down appropriately illustrated on “FINAL

CONSTRUCTION” page.

SAFETY NOTES

• Some parts may have sharp edges. It is

advisable to wear gloves when handling these

items and safety glasses if drilling holes.

Sensible shoes are highly recommended.

• Do not erect your shed in windy conditions.

• Ensure that the shed is securely anchored

to a solid foundation immediately after

construction is completed.

• It is highly recommended to erect the shed

with two or more people.

• Do not sit, stand or walk on the roof of your

shed.

Absco Industries Assembly Instruction Manual

ABSCO BIKE SHED

MODEL: 30153BK-PTX

10’ W x 5’ D x 5’11”H, 6’10”H

Model: 30153BK-PTX 29/06/2022 1.0 3

Australian Made

QTY DESCRIPTION PART # CHK

CHANNEL

JOINER



CSJ

1POP

RIVETER

RIVET

GUN

1SINGLE DOOR

FITTINGS PACK

PSTK

SNG

2

DRILL BIT DRILL

2PHILLIPS

DRIVER BIT

FAST

038

18 POP RIVET FAST

009



HD BOLT

& NUT

FAST

004 &

005

QTY DESCRIPTION PART # CHK

3DOOR

STRAP 12A

1DOUBLE DOOR

FITTINGS PACK

PSTK

DBL

4DOOR

PADBOLT

FAST

006

3PADBOLT

HASP

FAST

007

SELF TAPPING

SCREW 8G

PACK QTY 220

FAST

001



HD BOLT

& NYLOC NUT

FAST

002 &

003

QTY DESCRIPTION PART # CHK

1STEEL SHEET

 H30

2STEEL SHEET

 H31

1STEEL SHEET

 H29

4STEEL SHEET

 43K

3STEEL SHEET

 34A

1STEEL SHEET



DOOR

QTY DESCRIPTION PART # CHK

2STEEL SHEET



DOOR

1STEEL SHEET

 30A

1STEEL SHEET

 30H

GABLE

RIGHT



16R

GABLE

LEFT



16L

FITTINGS PACK

SHEETING AND LARGE COMPONENTS

Absco Industries Assembly Instruction Manual

ABSCO BIKE SHED

MODEL: 30153BK-PTX

10’ W x 5’ D x 5’11”H, 6’10”H

Model: 30153BK-PTX 29/06/2022 1.0 4

Australian Made

QTY DESCRIPTION PART # CHK

1CHANNEL

 53B

3CHANNEL

 58A

2CHANNEL

 58B

6CHANNEL

 58C

1CHANNEL

 77F

1CHANNEL

 55AL

1CHANNEL

 55BL

1CHANNEL

 55CL

2CHANNEL

 81AL

1CHANNEL

 81BL

3JAMB

 89A

1JAMB

 89B

1JAMB

 89C

2LIP TRIM

 88J

QTY DESCRIPTION PART # CHK

1CHANNEL

 77G

1CHANNEL

 79A

1CHANNEL

 79C

1CHANNEL

 80D

1CHANNEL

 81F

1CHANNEL

 55AR

1CHANNEL

 55BR

1CHANNEL

 55CR

2CHANNEL

 81AR

1CHANNEL

 81BR

1JAMB

 90A

1JAMB

 90C

6JAMB

 91A

2LIP TRIM

 88P

CHANNEL PACK

Absco Industries Assembly Instruction Manual

ABSCO BIKE SHED

MODEL: 30153BK-PTX

10’ W x 5’ D x 5’11”H, 6’10”H

Model: 30153BK-PTX 29/06/2022 1.0 5

Australian Made

SNAPTiTE ASSEMBLY GUIDE

The Snaptite Assembly System locks end channels to all roof and wall sheets without the need for

tools and fasteners.

To assemble each panel, the perimeter channels are secured to the top and bottom of each panel.

Gently tap the channel over the SNAPTiTE lugs on the sheet, working along the sheet.

Each perimeter channel must ﬁnish ﬂush with the edges of the sheets. Simply tap the channel along

the sheets until each end is neatly ﬂush. If you need to remove channels from the panels, slide it off

from the side.

Channel locks the shed panel into

position without the need for screws!

FASTENING SYMBOLS

Secure channel to sheeting by SNAPTiTE

fastening method.

Join components together with one

screw at this location only, as some

channels have extra holes that are not

required for this model of shed.

Do not join components together at

this location yet, as the screws may

obstruct further assembly of the other

components.

Join components together by pre-drill-

ing the holes ﬁrst. Use one component as

template to mark where the holes are and

drill with a 1/8” drill bit.

1/8” pop rivet

3/16” nut and bolt set.

SNAP

T TE

Absco Industries Assembly Instruction Manual

ABSCO BIKE SHED

MODEL: 30153BK-PTX

10’ W x 5’ D x 5’11”H, 6’10”H

Model: 30153BK-PTX 29/06/2022 1.0 6

Australian Made

Guide on Joining Spliced Channels

The text marked on all parts must be shown on the same side as each other

Step 1.

Position the channels and the

CSJ joiner so the centre of

the CSJ is in line with the end

of each channel to be joiner

together.

Step 2.

Join the ﬁrst channel to the CSJ

by inserting the centre of the

CSJ, on an angle, to the end of

the channel where the JOIN>>

text is marked.

Push down one side of the CSJ

until you hear a ‘click’.

Step 3.

Join the second channel to the

CSJ by positioning the <<JOIN

of the channel at the centre of

the CSJ, on an angle. Push the

CSJ into the channel until you

hear a ‘click’.

Finished Channel.

The joined channels should

now look like the picture with

the CSJ positioned equally

inside of the joined channels.

Drill out holes with 1/8” drill

bit in CSJ to match the holes

in channel. Drilling of screws

on the joined channels is being

done after sheets are locked on

the spliced channels.

= =

JOIN>> <<JOIN

CSJ

JOIN>>

JOIN>> SJ

= =

JOIN>>

<<JOIN

= =

JOIN>> <<JOIN

Finished Spliced

Channel

Push

25/32” 19/32”

CSJ

...

Absco Industries Assembly Instruction Manual

ABSCO BIKE SHED

MODEL: 30153BK-PTX

10’ W x 5’ D x 5’11”H, 6’10”H

Model: 30153BK-PTX 29/06/2022 1.0 7

Australian Made

PRE-ASSEMBLY OF SPLICED CHANNELS

NOTE: Some channels may have holes in them - You will

need to redrill holes where CSJ joining channel covers

them.

Join together 12x channel sections using 6x channel joiners (Part CSJ)











81BL

81BR

55BR

55BL

55CL

55CR

55AR

55AL

81AR

81AL

2 X 81AR

2 X 81AL

1 X 55AR

1 X 55AL

1 X 55CR

1 X 55CL

1 X 55BR

1 X 55BL

1 X 81BR

1 X 81BL



Absco Industries Assembly Instruction Manual

ABSCO BIKE SHED

MODEL: 30153BK-PTX

10’ W x 5’ D x 5’11”H, 6’10”H

Model: 30153BK-PTX 29/06/2022 1.0 8

Australian Made

53B

81E

55A

81F

34A

91A

89A

55C

79A

34A

91A

80D

30H

30A

53B

77F

77G

H29 55B

H31

H31 H30

90A

55A

89A

89B

22A

88P

81B

90C

79B

43K

88J

81A

88J

WALL AND ROOF OVERVIEW

Further detail on

following pages

Absco Industries Assembly Instruction Manual

ABSCO BIKE SHED

MODEL: 30153BK-PTX

10’ W x 5’ D x 5’11”H, 6’10”H

Model: 30153BK-PTX 29/06/2022 1.0 9

Australian Made

REAR PANEL ASSEMBLY

H30

H31

H29

80D

55B

SNAP

T TE

SNAP

T TE

81B

Absco Industries Assembly Instruction Manual

ABSCO BIKE SHED

MODEL: 30153BK-PTX

10’ W x 5’ D x 5’11”H, 6’10”H

Model: 30153BK-PTX 29/06/2022 1.0 10

Australian Made

RIGHT SIDE PANEL ASSEMBLY

1x required

30A

30H

77G

81F

SNAP

T TE

SNAP

T TE

Otros manuales de Almacenamiento al aire libre de ABSCO SHEDS

ABSCO SHEDS

ABSCO SHEDS 30302GK Manual de usuario

ABSCO SHEDS

ABSCO SHEDS SIGNATURE ADCPSN3 Manual de usuario

ABSCO SHEDS

ABSCO SHEDS 30222RK Manual de usuario

ABSCO SHEDS

ABSCO SHEDS MN3060UTK Manual de usuario

ABSCO SHEDS

ABSCO SHEDS 30082SECOK Manual de usuario

ABSCO SHEDS

ABSCO SHEDS AWN33 Manual de usuario

ABSCO SHEDS

ABSCO SHEDS 230813BK-PTX Manual de usuario

ABSCO SHEDS

ABSCO SHEDS Space Saver 23081SK Manual de usuario

ABSCO SHEDS

ABSCO SHEDS 30152GK Manual de usuario

ABSCO SHEDS

ABSCO SHEDS PREMIER 30302GECOK Manual de usuario

ABSCO SHEDS

ABSCO SHEDS REGENT 23221RK Manual de usuario

ABSCO SHEDS

ABSCO SHEDS Regent 30142RK Guía de instalación

ABSCO SHEDS

ABSCO SHEDS Premier 23231GK Manual de usuario

ABSCO SHEDS

ABSCO SHEDS 1508WBCK Manual de usuario

ABSCO SHEDS

ABSCO SHEDS N3/C1 FRAME KIT Manual de usuario

ABSCO SHEDS

ABSCO SHEDS 15141RK Manual de usuario

ABSCO SHEDS

ABSCO SHEDS 3060HK Manual de usuario

ABSCO SHEDS

ABSCO SHEDS 30152GK-PTX Manual de usuario

ABSCO SHEDS

ABSCO SHEDS 30082E Manual de usuario

ABSCO SHEDS

ABSCO SHEDS 60303WK Manual de usuario

ABSCO SHEDS

ABSCO SHEDS 2308WBCK Manual de usuario

ABSCO SHEDS

ABSCO SHEDS BUSH RANGER 3023BRK Manual de usuario

ABSCO SHEDS

ABSCO SHEDS J30082SK Manual de usuario

ABSCO SHEDS

ABSCO SHEDS PREMIER 30232GECOK Manual de usuario

Manuales populares de Almacenamiento al aire libre de otras marcas

USP

USP DURAMAX 10 Ft x 8 Ft StoreMax Plus Manual de usuario

TYGO

TYGO Nyland Manual de usuario

Duratuf

Duratuf GL105 Manual de usuario

Viking

Viking SD5300SS Manual técnico

USP

USP DURAMAX Apex Pro 10.5 Ft x 8 Ft 40116 Manual de usuario

ModuLaro

ModuLaro Lojo WC202200 Manual de usuario

Lifetime

Lifetime 6418 Manual de usuario

rollaway container

rollaway container ARPCA24 Manual de usuario

Duratuf

Duratuf Havelock Manual de usuario

X-METAL

X-METAL 4065 Manual de usuario

Outdoor Life Products

Outdoor Life Products FP2030 F Manual de usuario

Royalcraft

Royalcraft Faro 295L Storage Box Manual de usuario

Riverlea

Riverlea Duratuf KIWI KS3 Manual de usuario

OLT

OLT GS84D-FJ-Plywood Manual de usuario

Rubbermaid

Rubbermaid 5L45 Manual de usuario

garofalo

garofalo TUSCANY EVO Manual de usuario

Duratuf

Duratuf Kiwi MK1 Manual de usuario

Eden

Eden CA2988 Manual de usuario