ABQINDUSTRIAL DD-100 Manual de usuario
Operating Instructions
Digital Durometer
Model DD-100
Distributed by: ABQ Industrial LP USA
Tel: +1 (281) 516-9292 / (888) 275-5772 eFax: +1 (866) 234-0451
Web: https://www.abqindustrial.net E-mail: [email protected]
Distributed by: ABQ Industrial LP USA
Tel: +1 (281) 516-9292 / (888) 275-5772 eFax: +1 (866) 234-0451
Web: https://www.abqindustrial.net E-mail: [email protected]
Table of Contents
1.0 Introduction ........................................................................ 2
1.1 Unpacking
1.2 Complete Kit
2.0 Power ....................................................................... 3
2.1 Battery Installation
2.2 Using the AC Adapter
3.0 Operating Instructions ........................................................................ 4
3.1 ON/OFF
3.2 AUTO OFF
3.3 HOLD
3.4 TOLERANCING
3.5 CLEAR
3.6 TOTAL RESET
3.7 FEATURE LOCK
4.0 Specifications ........................................................................ 5
4.1 Conforms to International Standards ............................................
4.2 Dimensional Drawings
5.0 Calibration & Repair ........................................................................ 7
6.0 Warranty ........................................................................ 8
– 1 –
1.0 Introduction
The new Check-Line DD-100 digial durometer is the ideal choice for a
wide range of Shore hardness measuring applications. Seven scales are
available: A, B, C, D, DO, O, OO.
The DD-100 conforms to:
• ASTMD-2240
• DIN53505
• ISO868
• ISO7619
1.1 Unpacking
Unpack the durometer and inspect it for any shipping damage. Notices
of defect must be filed immediately, in writing, at the latest within 10 days
on receipt of the goods.
1.2 Complete Kit
The DD-100 is supplied as a complete
kit including the durometer, instruction
manual and NIST-traceable calibration
certificate all in a foam-fitted metal
carrying case.
2.0 Power
2.1 Battery Installation
The DD-100 digital durometer use two
internal batteries or an AC adapter.
1. Using a narrow screwdriver, gently
pry under the tab on the left side of
the plastic bezel and slide the battery
tray as you turn the gauge face down.
2. Insert two batteries, “+” side up, into tray cavities,
then slide the tray into its bezel slot, taking care
that the batteries stay in proper position.
NOTE: It is highly recommended that the batteries be removed from
the gauge if it will not be used, or will be powered by the adapter for an
extended period of time. This is to prevent damage to the gauge from
battery leakage or corrosion.
2.2 AC Adapter
A9VACadaptercanalsobeusedtopowerthegaugeforcontinuous
operation.Theseadaptersprovide9VDC±10%tothegauge,withcurrent
limited to 30mA. Connecting the AC adapter disconnects the internal
batteries (if installed).
NOTE: Do not attempt to attach the AC adapter when the gauge is already
on, this could result in erroneous readings on an error condition
+ +
– 3 –
3.0 Operating Instructions
To operate the gauge, press the foot of the
gauge firmly against the specimen, but not so
firmly as to imbed the foot into the surface.
This will yield the maximum durometer
reading. If, during use, the display “freezes”
on a number, simply remove the dust cover on
top of the gauge and depress the screw with a
pen or pencil, then press ON/CLR. This resets
the gauge—no further calibration is necessary.
3.1 ON/OFF
1. To Turn Gauge On Press ON/CLR and
release when CLR appears.
2. To Turn Gauge Off Press and release OFF/MODE.
3.2 AUTO OFF
To Activate/Deactivate Auto Off
1. Press and hold MOVE 2ND until 2ND appears on the bottom of the
display and then release.
2. Press and release OFF/MODE within 3 seconds.
NOTE: An hour glass will appear on left side of display if Auto Off
feature is active
– 4 –
3.3 HOLD
To Activate/Deactivate Hold
1. Press and release HOLD until MAX appears in the top of the display.
2. Press and hold HOLD until MAX disappears.
3.4 TOLERANCING
To Set Tolerance Numbers
1. Press and hold TOL until cursor moves under HIGH.
2. Press and release CHNG and MOVE 2ND simultaneously.
NOTE: SET appears on bottom of display.
3. Press and release MOVE 2ND until the digit to be set is blinking.
4. Press and release CHNG to increment the blinking digit.
5. Repeat steps 2 and 3 until desired number is entered.
6. Press and release CHNG and MOVE 2ND simultaneously
NOTE: After step 5 is complete, the cursor will automatically move to
LOW. Repeat steps 1 through 5 to set the low tolerances.
To Activate/Deactivate Tolerances
1. Press and release TOL.
NOTE: When the tolerance feature is on, any reading out of tolerance will
result in a flashing display.
– 5 –
3.5 CLEAR
To Clear Display To Zero
1. Press and release ON/CLR.
3.6 TOTAL RESET
To Clear All Settings And Return To Factory Set Defaults
1. PressandholdMOVE2NDuntil2NDappearsonbottomofdisplay
and then release.
2. Press and release ON/CLR within 3 seconds.
3. Press and release CHNG within 3 seconds.
NOTE: Total reset cannot be accomplished if lock feature is on.
3.7 FEATURE LOCK
To Activate/Deactivate Lock Feature
1. Press and hold MOVE 2ND until 2ND appears on bottom of display
and then release.
2. Press and release ON/CLR within 3 seconds.
3. Press and release TOL within 3 seconds.
NOTE: A key will appear on the bottom left side of display when features
are locked.
– 6 –
4.0 Specifications
* NOTE: per ASTM D 2240-05, Sect 9.3: It is accepted that durometer readings be-
low 20 or above 90 are not considered reliable. It is suggested that readings in these
ranges be omitted.
Resolution 0.1 units
LCD Size 8mm
Dimensions 5.04"x 2.24"x 1.18"(128 x 57 x 30 mm)
Weight 7 ounces (200 grams)
Power Supply 3V CR-2450 batteries (2)
AC adapter (optiional)
Warranty 1 year
4.1 Conformance to International Standards
Model ASTM D2240 DIN 53505 ISO 868 ISO 7619
DD-100-A ●●●●
DD-100-B ●
DD-100-C ●
AD-100-D ●●●●
DD-100-DO ●
DD-100-O ●
DD-100-OO ●
4.2 Dimensional Drawings
5.0 Calibration and Repair
All Check Line durometers requiring calibration and/or certification should
besentdirectlytoELECTROMATICEquipmentCo.,Inc.
6.0 Warranty
ELECTROMATICEquipmentCo.,Inc.(ELECTROMATIC)warrantstotheoriginalpurchaser
that this product is of merchantable quality and confirms in kind and quality with the descriptions
and specifications thereof. Product failure or malfunction arising out of any defect in workmanship
or material in the product existing at the time of delivery thereof which manifests itself within one
year from the sale of such product, shall be remedied by repair or replacement of such product, at
ELECTROMATIC’soption,exceptwhereunauthorizedrepair,disassembly,tampering,abuseor
misapplicationhastakenplace,asdeterminedbyELECTROMATIC.Allreturnsforwarrantyor
non-warrantyrepairsand/orreplacementmustbeauthorizedbyELECTROMATIC,inadvance,
with all repacking and shipping expenses to the address below to be borne by the purchaser.
THE FOREGOING WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR
IMPLIED,INCLUDINGBUTNOTLIMITEDTO,THEWARRANTYOFMERCHANTABILITY
ANDFITNESSFORANYPARTICULARPURPOSEORAPPLICATION.ELECTROMATICSHALL
NOTBERESPONSIBLENORLIABLEFORANYCONSEQUENTIALDAMAGE,OFANYKIND
ORNATURE,RESULTINGFROMTHEUSEOFSUPPLIEDEQUIPMENT,WHETHERSUCH
DAMAGEOCCURSORISDISCOVEREDBEFORE,UPONORAFTERREPLACEMENTOR
REPAIR,ANDWHETHERORNOTSUCHDAMAGEISCAUSEDBYMANUFACTURER’SOR
SUPPLIER’SNEGLIGENCEWITHINONEYEARFROMINVOICEDATE.
Some State jurisdictions or States do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitation may not apply to you. The duration of any implied warranty, including,
without limitation, fitness for any particular purpose and merchantability with respect to this product, is
limited to the duration of the foregoing warranty. Some states do not allow limitations on how long an
implied warranty lasts but, not withstanding, this warranty, in the absence of such limitations, shall
extend for one year from the date of invoice.
Every precaution has been taken in the preparation of this manual. Electromatic Equipment Co., Inc.,
assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting
from the use of information contained herein. Any brand or product names mentioned herein are used
for identification purposes only, and are trademarks or registered trademarks of their respective holders
Distributed by: ABQ Industrial LP USA
Tel: +1 (281) 516-9292 / (888) 275-5772 eFax: +1 (866) 234-0451
Web: https://www.abqindustrial.net E-mail: [email protected]
Distributed by: ABQ Industrial LP USA
Tel: +1 (281) 516-9292 / (888) 275-5772 eFax: +1 (866) 234-0451
Web: https://www.abqindustrial.net E-mail: [email protected]
Tabla de contenidos
Otros manuales de Instrumento de medición de ABQINDUSTRIAL
ABQINDUSTRIAL
ABQINDUSTRIAL HORIBA U-50 Series Manual de usuario
ABQINDUSTRIAL
ABQINDUSTRIAL TI-25MXT Manual de usuario
ABQINDUSTRIAL
ABQINDUSTRIAL TI-25PX Manual de usuario
ABQINDUSTRIAL
ABQINDUSTRIAL LS-36-LED Manual de usuario
ABQINDUSTRIAL
ABQINDUSTRIAL TotalCheck Manual de usuario
ABQINDUSTRIAL
ABQINDUSTRIAL RP6 Manual de usuario
ABQINDUSTRIAL
ABQINDUSTRIAL SKIPPER 5 Manual de usuario
ABQINDUSTRIAL
ABQINDUSTRIAL DT-5TG Manual de usuario
ABQINDUSTRIAL
ABQINDUSTRIAL HT-4000 Manual de usuario
ABQINDUSTRIAL
ABQINDUSTRIAL GalvanoTest 3000 Manual de uso y cuidado
ABQINDUSTRIAL
ABQINDUSTRIAL Dakota Ultrasonics ZX-2 Manual de usuario
ABQINDUSTRIAL
ABQINDUSTRIAL DCF-3000EZ-E Manual de usuario
ABQINDUSTRIAL
ABQINDUSTRIAL TI-25MX Manual de usuario
ABQINDUSTRIAL
ABQINDUSTRIAL Checkline TI-25DLXT Manual de usuario
ABQINDUSTRIAL
ABQINDUSTRIAL Western Instruments WC-8 Manual de usuario
ABQINDUSTRIAL
ABQINDUSTRIAL DELMHORST J-2000 Manual de usuario
ABQINDUSTRIAL
ABQINDUSTRIAL TI-007DLX Manual de usuario
ABQINDUSTRIAL
ABQINDUSTRIAL TI-25MX Manual de usuario
Manuales populares de Instrumento de medición de otras marcas
Endress+Hauser
Endress+Hauser Proline Promag 50 Especificaciones técnicas
Siemens
Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas
KLINGER
KLINGER CMF V Series Manual de usuario
EXFO
EXFO FTB-2 Manual de operación y mantenimiento
Keysight
Keysight M8290A Manual de usuario
ADTEK
ADTEK MW-5 Manual de usuario