Ableconn Mini DP 1.2 Manual de usuario
User's
Manual
Table of Contents
- Safety
Instructions
.......................................................
2
- Copyright
......................................................................
2
-
Trademarks ...................................................................
2
Introduction
...........................................................
3
- Features
........................................................................
3
- Package Contents
........................................................
4
- System
Requirements..................................................
4
Product Overview
.................................................
5
- Connection
...................................................................
5
Extended/mirror mode
.........................................
7
Specification
.........................................................
10
Regulatory
Compliance .......................................
11
- FCC
Conditions ............................................................
11
- CE
..................................................................................
11
- WEEE
Information
........................................................
11
1
Before attempting to connect, operate or adjust this product, please
save and read the User's Manual completely. The style of the
product shown in this User's Manual may be different from the actual
unit due to various models.
Safety Instructions
Always read the safety instructions carefully:
■Keep this User’s Manual for future reference
■Keep this equipment away from humidity
■If any of the following situation arises, get the equipment
checked by a service technician:
•The equipment has been exposed to moisture.
•The equipment has been dropped and damaged.
•The equipment has obvious sign of breakage.
•The equipment has not been working well or cannot get
it to work according to the User’s Manual.
Copyright
This document contains proprietary information protected
by copyright. All right are reserved. No part of this manual
may be reproduced by any mechanical, electronic or other
means, in any form, without prior written permission of the
manufacturer.
Trademarks
All trademarks and registered trademarks are the property
of their respective owners or companies.
2
Introduction
The Mini DisplayPort to VGA Adapter enable you to
connect any VGA interface embedded device (Monitor,
Projector…) with a Mini DisplayPort interface (Desktop,
Laptop) and no need to purchase any Mini DisplayPort
embedded terminal device.
Features
■ Compliance with Mini DP specification V1.2, VESA DDM
standard, HDCP v1.3 and EDID v1.4
■ Support VESA and CEA timing standards up to UXGA
and 1920x1200@60Hz
■ Support 1 VGA output port e
■ Support main link rates of 2.7Gbps(HBR) and
1.62Gbs(RBR) from the source
■ Support 1 Mini DisplayPort input port
■ Support Active mode to translate the exact DP signal
to VGA signal.
3
Package Contents
■Mini DP to VGA Adapter x
1
■User’s Manual x
1
System Requirements
■It works with
W
indows®
7
,
W
indows® 8
,
W
indows® 8.1
,
W
indows® 10 and Mac®
OS
4
Product Overview
VGA
receptacle Mini
DisplayPort
plug
Connection
Check the following information before connecting to
a mini display
device.
■The product DO NOT need any external
drivers.
■This product is the adapter for connecting mini
DisplayPort to VGA port.
■Make sure the source device (Desktop, Laptop…)
Has been mini-DisplayPort embedded or
bundled
any Adapter / connector with
mini-DisplayPort.
■Make sure the terminal device (Monitor,
Projector…)
has been VGA port embedded or bundled any
Adapter / connector with VGA
port.
5
■A VGA male to male cable is necessary
when
connecting to a terminal device.
(Note this cable is not
supplied)
■
W
indows®
7
,
W
indows® 8
,
W
indows® 8.1
,
W
indows® 10 operation system
is
n
ecessary
when switching to eyefinity mode.
6
Extended/mirror mode
1. Plug a VGA male connector into the VGA receptacle
of
Adapter, and the other end to a VGA embedded
device.
(Cable of VGA male to male is not supplied)
2. Plug the Mini DisplayPort into
a
Mini-DisplayPort embedded device.
3. Configure the display settings
For Windows® OS:
Position the mouse anywhere on your computer
desktop, right-click and select Display settings on
Windows®10, Screen Resolution on Windows®7 /
Windows®8/ Windows®8.1, and then select the
option that best suits your needs from the drop-
down menu of Multiple Displays.
7
Tabla de contenidos
Otros manuales de Adaptador de Ableconn
Ableconn
Ableconn MDP2HD4KA Manual de usuario
Ableconn
Ableconn PEX-FW101 Manual de usuario
Ableconn
Ableconn USB3HD4KB Manual de usuario
Ableconn
Ableconn ISAT-M2SR Manual de usuario
Ableconn
Ableconn USB3DP00B Manual de usuario
Ableconn
Ableconn PEX-SA1 series Manual de usuario
Ableconn
Ableconn BC81440 Manual de usuario
Ableconn
Ableconn USB2E100W Manual de usuario
Ableconn
Ableconn USB2E100B Manual de usuario
Ableconn
Ableconn USB2E100W Manual de usuario
