Abit VA-20 Manual de usuario

VA-20

AMD Athlon™XP / Athlon™/ Duron™

Socket 462 System Board

User’s Manual

Rev. 1.00

The information in this document is subject to change without notice and does not

represent a commitment on part of the vendor, who assumes no liability or

responsibility for any errors that may appear in this manual.

No warranty or representation, either expressed or implied, is made with respect to the

quality, accuracy or fitness for any particular part of this document. In no event shall

the manufacturer be liable for direct, indirect, special, incidental or consequential

damages arising from any defect or error in this manual or product.

Product names appearing in this manual are for identification purpose only and

trademarks and product names or brand names appearing in this document are

property of their respective owners.

This document contains materials protected under International Copyright Laws. All

rights reserved. No part of this manual may be reproduced, transmitted or transcribed

without the expressed written permission of the manufacturer and authors of this

manual.

VA-20

Table Of Contents

Chapter 1. Introduction .................................................... 1-1

1.1. Features & Specifications....................................................... 1-1

1.2. Layout Diagram...................................................................... 1-3

1.3. Jumpers & Connectors Description........................................ 1-4

Chapter 2. Hardware Setup.............................................. 2-1

2.1. Precautions ............................................................................. 2-1

2.2. Installing the System Board ................................................... 2-2

2.3. Install CPU and Heatsink ....................................................... 2-3

2.4. System Memory ..................................................................... 2-5

2.4.1. Memory Configuration Table...................................2-5

2.4.2. Installing and Removing Memory Modules............. 2-6

2.5. Connectors, Headers, and Switches ....................................... 2-7

2.5.1. ATX Power Connectors (ATX1).............................. 2-7

2.5.2. FAN Connectors (CPUFAN1, CASFAN1).............. 2-8

2.5.3. CMOS Memory Clearing Header (JP1) ................... 2-9

2.5.4. BIOS Write Protection Header (JP3)...................... 2-10

2.5.5. CPU FSB Frequency Selector (JP8, JP9) ............... 2-11

2.5.6. Front Panel Switches & Indicators Connection

Headers (PANEL1)................................................. 2-12

2.5.7. Additional USB Port Connection Header (USB3,

USB4) ..................................................................... 2-13

2.5.8. Front Panel Audio Connection Header (AUDIO1) 2-14

2.5.9. Accelerated Graphics Port Slot (AGP1)................. 2-15

2.5.10. Internal Audio Source Connectors (CDIN1, AUXIN1)

................................................................................ 2-15

2.5.11. Floppy Disk Drive Connector (FDD1)................... 2-16

2.5.12. IDE Disk Drive Connectors (IDE1, IDE2)............. 2-17

2.5.13. Additional COM Port Connection Header (COM2)2-18

2.5.14. Serial ATA connectors (SATA1, SATA2)............. 2-19

2.5.15. External I/O Panel................................................... 2-20

User’s Manual

Chapter 3. BIOS Setup...................................................... 3-1

3.1. About the Setup Utility........................................................... 3-1

3.1.1. The Standard Configuration ..................................... 3-1

3.1.2. Entering the Setup Utility ......................................... 3-2

3.1.3. Updating the BIOS ................................................... 3-3

3.2. Using BIOS ............................................................................ 3-4

3.2.1. Standard CMOS Features ......................................... 3-4

3.2.2. Advanced BIOS Features ......................................... 3-7

3.2.3. Advanced Chipset Features ...................................... 3-9

3.2.4. Integrated Peripherals ............................................. 3-14

3.2.5. Power Management Setup ...................................... 3-19

3.2.6. PnP/PCI Configurations.......................................... 3-24

3.2.7. PC Health Status ..................................................... 3-26

3.2.8. Frequency/Voltage Control .................................... 3-27

3.2.9. Load Fail-Safe Defaults Option.............................. 3-28

3.2.10. Load Optimized Defaults Option ...........................3-28

3.2.11. Set Password........................................................... 3-28

3.2.12. Save & Exit Setup Option....................................... 3-29

3.2.13. Exit Without Saving ............................................... 3-29

Chapter 4. Driver Installation .......................................... 4-1

4.1. Setup Items ............................................................................. 4-2

Appendix A. How to Get Technical Support ..................... A-1

VA-20

Introduction 1-1

Chapter 1. Introduction

1.1. Features & Specifications

CPU

• Supports AMD Socket 462 Athlon XP/Athlon/Duron/Sempron

Processor with 400/333/266MHz FSB

Chipset

• VIA KM400A + VT8237

Memory

• Two 184-pin DIMMs

• DDR400/333/266/200 un-buffered Memory

• Support DDR400 Memory up to 2GB

Graphics

• Integrated UniChrome Pro Graphics with 2D/3D/video controller

SATA RAID

• 2-channel SATA 150 support RAID 0 & RAID 1

LAN

• Onboard 10/100Mb LAN (VIA VT6103L 10/100Mbps PHY)

Audio

• 6-Channel AC 97 CODEC onboard (Realtek ALC655)

Internal I/O Connectors

• 1x AGP 8X/4X slot

• 3x PCI slots

• 1x Floppy Port supports up to 2.88MB

• 2x Ultra DMA 33/66/100/133 Connectors

• 2x Serial ATA 150 Connectors

• 2x USB 2.0 headers (Each header support two USB 2.0 devices)

• 1x CD-IN, 1x AUX-IN

• 1x FP-Audio header

• 1x COM2 header

User’s Manual

1-2 Chapter 1

Back Panel I/O

• 1x PS/2 Keyboard, 1x PS/2 Mouse

• 1x Parallel Port, 1x Serial Port, 1x VGA Port,

• 4x USB 2.0, 1x RJ-45 LAN Connector

• 3 holes Audio connectors (Line-out, Line-in, Microphone)

Miscellaneous

• Micro ATX form factor (244mm x 220mm)

 All brand names and trademarks are the property of their respective

owners.

 This motherboard is customized for certain system configurations; and

may not fit system integration in all DIY ways. Before purchase this

product, please check ABIT web site for recommended device listings, or

contact sales/tech support people.

 Specifications and information contained herein are subject to change

without notice.

VA-20

Introduction 1-3

1.2. Layout Diagram

User’s Manual

1-4 Chapter 1

1.3. Jumpers & Connectors Description

Jumpers Description Default Setting

JP1 CMOS Memory Clearing Header Pins 1-2 Closed (Normal)

JP3 BIOS Write Protection Header Pins 1-2 Closed

(Write Protect Enabled)

JP8/JP9 CPU FSB Frequency Selector

JP8: Pins 2-3 Closed

JP9: Pins 1-2 Closed

(133MHz)

Connectors Description

AGP1 Accelerated Graphics Port Slot

ATX1 20-pin ATX12V Power Connector

AUDIO1 Front Panel Audio Connection Header

CDIN1/AUXIN1 Internal Audio Connectors

COM2 Additional COM Port Connection Header

CPUFAN1/CASFAN1 Fan Power Connectors

DIMM1/DIMM2 DDR DIMM Slots

FDD1 Floppy Disk Drive Connector

IDE1/IDE2 Hard Disk Drive Connectors

PANEL1 Front Panel Switch Connection Headers

PCI1/PCI2/PCI3 32bit/33MHz PCI Slots

SATA1/SATA2 Serial ATA connectors

USB3/USB4 Additional USB Port Connection Headers

VA-20

Hardware Setup 2-1

Chapter 2. Hardware Setup

2.1. Precautions

Please pay attention to the following precautions before setting up any hardware.

1. Always switch off the power supply and unplug the power cord from the wall

outlet before installing the board or changing any settings.

2. Ground yourself properly by wearing a static safety wrist strap before removing

the board from the antistatic bag.

3. Hold the board by its edges. Avoid touching any component on it.

4. Avoid touching module contacts and IC chips

5. Place the board on a grounded antistatic surface or on the antistatic bag that came

with the board.

User’s Manual

2-2 Chapter 2

2.2. Installing the System Board

Before installing the system board, exam your chassis to ensure this system board fits

into it.

1. Face the side of the I/O ports toward the rear part of the chassis.

2. Locate the screw holes on the system board and the chassis base.

3. Place all the studs or spacers needed on the chassis base and have them tightened.

4. Line up all the screw holes on the board with those studs or spacers on the chassis.

5. Tightens all the screw holes.

ATTENTION: To prevent shorting the PCB circuit, please REMOVE the metal studs

or spacers if they are already secured on the chassis base and are without

mounting-holes on the system board to align with.

VA-20

Tabla de contenidos

Otros manuales de Placa madre de Abit

Abit

Abit SA6 Manual de usuario

Abit

Abit NI8 SLI Series Manual de usuario

Abit

Abit AT7-MAX2 Manual de usuario

Abit

Abit IX48 GT3 Manual de usuario

Abit

Abit SX7-533 Manual de usuario

Abit

Abit VT6X4 Manual de usuario

Abit

Abit KN9 SLI Manual de usuario

Abit

Abit CX6 Manual de usuario

Abit

Abit IS-85 Manual de usuario

Abit

Abit AB-BE6 Manual de usuario

Abit

Abit KT7E Manual de usuario

Abit

Abit AT6E Manual de usuario

Abit

Abit IC7-MAX3 Manual de usuario

Abit

Abit AN52S Manual de usuario

Abit

Abit SG-71 Manual de usuario

Abit

Abit AMD Athlon 64 System Board Socket 754 Manual de usuario

Abit

Abit BX133-RAID Manual de usuario

Abit

Abit BH6 Manual de usuario

Abit

Abit IX38 QuadGT Manual de usuario

Abit

Abit AT7-MAX2 Manual de usuario

Abit

Abit WI-2P Manual de usuario

Abit

Abit AB-AT7-MAX2 Manual de usuario

Abit

Abit BD7II Manual de usuario

Abit

Abit IT5 Series Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario