ABB TMAX XT XT6 ELECTRONIC Instrucciones de instalación
—
INSTRUCTION HANDBOOK
1SDH002299A1001 - ECN000285442
TMAX XT XT6 THERMOMAGNETIC
Disassembly instructions
3
Disassembly instruction tmaX Xt Xt6 tHermomaGnetic
1. SCOPE
Scope of this document is to illustrate the step-by-step disassembly process of ABB SACE Tmax XT XT6
moulded case circuit breaker equipped with a thermomagnetic trip unit.
Document is focused on Tmax XT XT6 3p IEC version, anyway it allows to cover other versions of Tmax
XT XT6 circuit breaker equipped with a thermomagnetic trip unit with just few slight differences to be
taken into account.
Gloves Glasses Safety shoes Protective clothes
4. TOOLS
Disassembly operations require the use of tools (e.g. screwdriver, torx key, pliers, …); tools to be used
are specified inside each phase of the disassembly process (see Chapter 6).
3. PERSONAL PROTECTIVE EQUIMENT (PPE)
When performing disassembly, following safety Personal Protective Equipment (PPE) must be worn:
2. SAFETY NOTES
Before proceeding with any disassembly operation, it’s mandatory to put the circuit breaker in open
position.
Disassembly operations of circuit breakers must be performed by qualified and skilled personnel in
the electrical field (IEV 195-04-01: person with relevant education and experience to enable him or her
to perceive risks and to avoid hazards which electricity can create) and having a detailed knowledge of
circuit breakers.
Disassembly activites must be performed in an ergonomic workspace able to ensure protection of per-
sons demanded to perform disassembly activities.
Applicable national legislation and international standards in force at the time of disassembly of circuit
breakers must be taken into account in addition to prescriptions illustrated in this document.
ABB declines any responsibility for injury to people or damage to property resulting from a failure to
comply with the instructions set out in this document and with any applicable safety standard.
4
INSTRUCTION HANDBOOK
If disassembled parts require a separate treatment a specific indication is provided inside each phase
with reason why for the separate treatment (see Chapter 6).
Description Position inside circuit breaker Quantity
Cap kits In correspondence of circuit breaker connection terminals
Plugs In correspondence of circuit breaker upper connection terminals
AUE lever group Mounted at the left of the toggle
Right base accessory Mounted in the bottom right part of the circuit breaker cover
Trip test rod Mounted on the right base accessory
Left base group Mounted in the bottom left part of the circuit breaker cover
Toggle extention Mounted on the toggle
Toggle protection Mounted on the toggle
Toggle holder Mounted on the toggle base
Dowels Mounted in the bottom part of the circuit breaking part
Mobile contacts assembly Mounted in the middle of the breaking part
Trimmers Mounted on the trip unit
Hook Mounted in the trip unit
6. DISASSEMBLY PROCESS
Circuit breakers disassembly process is constituted by a sequence of operations to be performed on
products after their dismounting from original installation. For each phase following information are
provided:
applicable)
5. SEPARATE TREATMENT
Table below lists parts requiring a separate treatment adding information about part location inside
circuit breakers and related quantity.
5
Disassembly instruction tmaX Xt Xt6 tHermomaGnetic
Tools
Allen key
Flat screwdriver
6.1 PHASE 1 – CAP KITS
1
By means of the allen key remove the screws
connected with the cap kits.
3
Manually separate the cap kits originally
mounted in corresponce of the upper terminals
from their plugs.
4
Insert the flat screwdriver as shown in the
picture and unhook the cap kits from the
circuit breaker.
2
Insert the flat screwdriver as shown in the
picture and unhook the cap kits and their plugs
from the circuit breaker.
Actions to be performed
5mm
Disassembled parts
(Thermoplastics containing brominated flame
retardants)
(Thermoplastics containing brominated flame
retardants)
6
INSTRUCTION HANDBOOK
Tools
Cross screwdriver
6.2 PHASE 2 – FRONTAL
5
By means of the flat screwdriver push the test
button in order to bring the circuit breaker in
trip position.
7
Manually remove the aesthetic front cover.
8
By means of the cross screwdriver unscrew the
6 screws fixing the upper and the lower front
covers to the circuit breaker main structure.
6
Insert the flat screwdriver as shown in the
picture and slightly push the screwdriver as
shown by the arrow in order to raise up and to
unhook the aesthetic front cover from circuit
breaker main structure; operation must be
performed even on the other side of the circuit
breaker.
Actions to be performed
Flat screwdriverFlat screwdriver
7
Disassembly instruction tmaX Xt Xt6 tHermomaGnetic
9
Manually remove the upper and the lower front
covers.
Disassembled parts
8
INSTRUCTION HANDBOOK
6.3 PHASE 3 – TRIP UNIT
10
By means of the allen key unscrew the 6 screws
fixing the trip unit to the breaking part.
12
Manually remove the trip unit from the
breaking part.
11
By means of the cross screwdriver unscrew
the circuit breaker fixing the trip unit to the
breaking part.
Actions to be performed
Tools
Disassembled parts
Allen key
4mm
Cross screwdriver
9
Disassembly instruction tmaX Xt Xt6 tHermomaGnetic
6.4 PHASE 4 – BREAKING PART COVER
13
By means of the cross screwdriver unscrew the
levers to the breaking part.
15
By means of the cross screwdriver unscrew
breaking part.
14
16
the same time push the toggle in the direction
indicated by the arrow; after manually remove
Actions to be performed
Tools
Cross screwdriver
Torx key
No. 25
Pliers
Flat screwdriver
Cutter
10
INSTRUCTION HANDBOOK
19
Manually remove the breaking part cover.
20
By means of the cross screwdriver unscrew the
4 screws fixing the right base accessory to the
breaking part.
17
By means of the pliers remove the spring
18
By means of the torx key unscrew the 9 screws
fixing the breaking part cover to the breaking
part main structure.
Otros manuales para TMAX XT XT6 ELECTRONIC
1
Tabla de contenidos
Otros manuales de Electricidad industrial de ABB
ABB
ABB HT588230 Manual de usuario
ABB
ABB Three Phase Mechanical AutoLink Manual de usuario
ABB
ABB ACS 800 Series Manual de usuario
ABB
ABB PS S18-300 Manual de usuario
ABB
ABB Emax X1 B 1150 V Manual de usuario
ABB
ABB ACS880-607 Series Manual de usuario
ABB
ABB SACE Tmax XT UL Manual de usuario
ABB
ABB Arc Guard System TVOC-2-COM Hoja de instrucciones
ABB
ABB VSC Manual de usuario
ABB
ABB SACE Tmax XT Series Manual de usuario
ABB
ABB VD4 Series Guía rápida
ABB
ABB JSM D28 Handle profile Manual de usuario
ABB
ABB SACE PR021/K Manual de usuario
ABB
ABB MC1 Manual de usuario
ABB
ABB GSC Series Manual del producto
ABB
ABB Tmax XT XT3 Instrucciones de instalación
ABB
ABB AF400 Manual de usuario
ABB
ABB Relion 670 series Guía del usuario
ABB
ABB Emax VF Guía rápida
ABB
ABB SACE Emax 2 Manual de usuario
Manuales populares de Electricidad industrial de otras marcas
S&C
S&C Vista SD Manual de usuario
Murata
Murata GRM0335C2A7R3CA01 Series Manual de usuario
Siemens
Siemens 3VA9988-0BM10 Manual de usuario
Siemens
Siemens SITRANS LVS100 Manual de usuario
Murata
Murata GRM32ER60G227ME05 Series Manual de usuario
Siemens
Siemens SENTRON SUPERSWITCH 3KL82 Series Manual de usuario