Abask J05 Manual de usuario
User Manual
Contents
English…….......……………….…….1-17
Deutsch…………….......……………18-35
Français………………….......………36-53
Italiano……………….....………….… 54-71
Español………………...….......…….. 72-89
1
Please format the memory card in the camera menu at the
first use.
This camera records video at high resolution. Be sure to
use a high-speed Micro SD card (Class 10 or above, max
supports 64GB.) For safety reasons, the built-in battery is
only used for emergency backup files.
To work, the dash cam must be connected to the car's
cigarette lighter socket or hardwired to the car's fuse box.
The video from the front camera can be reviewed directly
from the dash cam or PC, but what was recorded by the
inside camera can only be reviewed through PC. Therefore,
please connect the camera to the PC by the attached USB
cable or just remove the memory card and read it on PC to
review the footage.
Warm Tips:
English
2
Interface and Button Function
1.Front Camera
2.Microphone
3. Screen
4.IR LED Lights
5.Inside Camera
6.Mini USB Port
7.Mount Socket
8.Left
9.Menu
10.Right
11.OK
12.Power
13.Reset Hole
14.Memory Card Slot
1
6
8910 11 12
13 14
3
2
75
4
3
Long press to turn ON / OFF the camera power.
Press to turn/off the screen.
In video mode, press to start/ stop video recording
In camera mode, press to take a photo.
In menu setting, press to confirm selection and
adjustment.
In playback mode, press to select and play
recorded files.
In menu setting, press to select option.
In standby mode or video recording modes, press
to switch front and inside display views.
In playback mode, press to select media files.
Long press to turn on/ off the LED light for the
inside camera.
In standby mode, press to access the menu settings,
and press twice to access System Setting Menu.
Return function: Press to return to the previous page.
In standby mode, long press to switch mode between
Video / Photo / Playback.
During video recording, long press to lock/ unlock
the current footage.
In menu setting, press to select option.
In playback mode, press to select media files.
During video recording, press to turn on/ off audio
recording while long press to on/ off parking monitor
function.
Button Function
Power
OK
MENU
▶
(RIGHT)
◀
(LEFT )
4
1. Before installation, please check the camera‘s normal fun-
ction, and make sure you are using a high-speed Micro SD
card( speed Class 10 or above ), and format the card in the
camera menu at the first use.
2. Use the suction cup mount to install the dash cam on the
windshield. The recommended location is near the inside view
mirror facing front.
3. Adjust the lens angle of the camera, make sure you get the
best coverage over the hood and the road ahead, so you can
record what happens.
4. Connect the camera to the car by the cigarette lighter, hide
the rest of the cable in the gap of the interior trim board.
�
�
Set up and Installation：
5
The dash cam operates in 3 modes: Video Recording Mode,
Photo Mode and Playback Mode. These modes also have
the menu to help you configure recording and taking photos.
Long press menu button to switch between different modes
and access to the mode you want. The represented icon for
each mode shows on the top left corner of the screen.
The camera will automatically enter Video Recording Mode
and start recording when connected to a car charger and
power on. A Red dot flashing on the top left corner indicates
record is in progress. Press the OK to stop recording, or start
recording again. The following are icon representations of
some common functions on the screen, indicating that these
functions are enabled. (You can also find their representations
through the menu accordingly).
1 . Video Recording Mode
2 . Loop Recording
3 . Exposure
4 . Motion Detection
5 . HDR
6 . G-sensor
7 . Recording Time
8 . Resolution
9.Parking Monitor
10 . LED Light Status
11 . Memory Card Status
12 . Power Status
13 . Audio Status
14 . Time & Date
Operating Modes:
Video Recording Mode:
6
In all 3 operating mode , you can press the MENU button
once to access the menu settings for that particular mode,
and press twice to display System Setting Menu.
The System Setting Menu is common to all modes.
Press ◀ and ▶to scroll through the various setting options
and press OK to select and confirm selection, Press MENU
again to exit the setting menu.
Adjust front camera recording video resolution
1080FHD / 720P / VGA, the inside camera will keep recor-
ding at 1080P.
Video Recording Menu :
Resolution:
Continuously record small video files of a
length which is determined by the settings of 1/ 2/ 3 Mins.
For example, if it is set for 3 minutes, the camera will auto-
matically save a section of videos every 3 minutes. When the
memory gets full, the dash cam will automatically delete the
oldest video to record the latest video, which can avoid a la-
ck of memory.
Loop Recording:
Turn on to optimize video quality withHigh Dynamic Range:
+
-
< >
>
<
7
wider light range and image details.
Adjust the exposure value to adjust the brightness
of the video.
Exposure:
Turn ON / OFF motion detection function.Motion Detection:
Turn ON / OFF audio recording in the video.Recording:
Enable / Disable the date and time marks in
video files.
Date Stamp:
G-G-sensor detects significant or sudden shock
and movement, then automatically locks the current file from
loop recording. Its sensitivity is adjustable (Off/ Low/ Medi-
um/High)
G-Sensor:
Note: To use this function wh-
en the car is parked, please buy a hard-wire kit (mini USB
type) for dash cam then connect to the vehicle’s fuse box
power so as to supply the power to the camera.
Parking Monitor: It's used to protect your car after parking.
With this function on, after you stop the car and the camera
turns off, it stays standby. When camera detects shock and
collision, it will automatically turn on and take a short video,
then shut down automatically.
< >
>
<
8
The camera can operate in Photo Taking Mode.
Set the photo resolution.
VGA/1M/2M/3M/5M/8M/10M for choices.
Photo Taking Mode:
In standby mode, long press MENU to switch to Photo Mode,
and press OK to take a photo.
Photo Mode Menu :
Resolution:
Turn on / off image stabilization function.Anti-shaking:
Enable / Disable the date and time marked in
image files.
Date Stamp:
To take a photo:
Like the Video Recording Mode, you can press the Menu bu-
tton once to access the setting menu for Photo Mode, Press
Menu twice to enter the system setting menu.
< >
>
<
Tabla de contenidos
Idiomas:
Otros manuales de Cámara de salpicadero de Abask
