A&D UC-352BLE-V Manual de usuario
E-1
UC-352BLE-V
DELUXE CONNECTED
WEIGHT SCALE
SMART
Congratulations on purchasing a state-of-the-art A&D medical connected scale,
one of the most advanced health scales available today. Designed for ease of use
and accuracy, this device will facilitate your daily weight management regimen.
We recommend that you read through this manual carefully before using the
device for the rst time.
Instruction Manual
Startup guide .......................................................E-2
Safety precautions...........................................E-3
Wireless communication function..................E-4
Accessories ......................................................E-4
Parts names .....................................................E-5
Installing (or replacing) the batteries.............E-6
Connecting to a mobile device (Pairing).......E-7
Setting the units ...............................................E-8
Measuring your weight....................................E-9
Other functions.................................................E-10
Specications ...................................................E-12
Before requesting service...............................E-13
Maintaining the scale ......................................E-13
E-2
Start up Guide
Get Started
Measuring
SMART
SMART
lb
SMART
Install the batteries
Pair with a receiver
Setting the unit
Step on the scale
Conrm that “StEP” and “oFF” are
alternately displayed
Step off the scale
Conrm your weight
Data is transmitted to your mobile device
Data is stored in the scale if there is no receiver
E-3
Safety Precautions
The following items contain information to prevent the risk of harm or injury to
yourself or other people. Please read these items carefully and be sure to use this
product correctly.
Danger This symbol indicates "an immediate danger which could result in death or
serious injury".
Warning This symbol indicates "the possibility of death or serious injury".
Caution This symbol indicates "the possibility of physical injury or damage to property".
Precautions for use
Warning
• Do not rely on self-diagnosis when attempting weight loss or therapeutic exercise. Follow the instructions of a
physician or specialist.
• Do not step on the edges of the scale or jump on the scale. It may result in a fall, causing injury. The impact may
also cause damage to the scale.
• Do not use the scale on an uneven surface. It may damage the scale. Also, the scale cannot measure accurately.
• Do not use the scale on a slippery surface, or step on the scale with wet feet. It may result in slipping and injury.
Also, the scale cannot measure accurately.
Caution
• Do not place the scale where it is exposed to excess water or humidity such as a bathroom, where it is exposed to direct
sunlight, where it is exposed directly to the air outlet of an air conditioning unit, or near re. It may cause the scale to
malfunction.
• This scale should only be used for weighing body weight.
• This scale is a precision measuring device. Do not drop the scale, or expose it to vibration or powerful shocks.
• Do not disassemble, repair or modify the scale. It may cause malfunction or injury.
• Persons with disabilities should be assisted by a caregiver when using this scale. Failure to do so may result in a fall,
causing injury.
• When installing the batteries, be sure that the + (positive) and - (negative) terminals are correct. Installing incorrectly may
cause overheating, battery uid leaks or rupturing of the batteries, resulting in damage to the scale or injury.
• This scale is designed for personal use.
• Store this scale out of the reach of small children.
• Do not store this scale vertically. If for any reason this scale is stored vertically, be sure not to let the scale fall.
• Do not place any items on this scale during storage.
• If use of this scale is shared with a person who has an infectious disease such as a skin disease on the feet, etc., clean the
scale before use. (For details on cleaning the scale, see "Maintaining the Scale" (P. E-13).)
• To accurately measure your weight, use the scale on a at, hard oor. Do not use on a carpet or other soft surface
E-4
Wireless Communication Function
This scale uses Bluetooth®wireless connectivity to communicate with a receiver
device. At the end of measurement, the measurement data is sent from this scale
to the receiver device.
Bluetooth®is communication technology that enables devices to communicate
wirelessly. The Bluetooth®word mark and logos are registered trademarks owned
by Bluetooth SIG, Inc. and any use of such marks by A&D is under license. Other
trademarks and trade names are those of their respective owners.
Receiver Device
Use with a device such as personal computer or smartphone with an application to enable Bluetooth®communications
with this scale. Download and install the app from Apple or Google
Precautions for Wireless Functions
Warning
• Do not use in places where wireless communication is prohibited, such as on airplanes or in hospitals. This scale may
have an adverse effect on electronic devices or medical electrical equipment.
Caution
• If the communication function of this scale is used near a wireless device that communicates in the 2.4 GHz range,
the processing speed of both devices may decrease. Do not use near a microwave oven where a magnetic eld, static
electricity or radio wave interference may occur. (The signal may not reach due to environmental reasons.)
* A&D cannot accept any responsibility for any losses incurred such as operating malfunctions or
loss of data that may occur through the use of this scale.
* This scale is not guaranteed to connect to all Bluetooth®compatible devices.
Accessories
If any of the following accessories are missing or damaged, contact the product
vendor or an A&D Sales Branch.
- 1 x Instruction Manual
- 4 x Alkaline Batteries
E-5
Part Names
Scale
Battery compartment
Feet
SMART
Display Set switch
Display Section
Display Symbols
Display Section
Symbol Name Description
OStable symbol This symbol is displayed when the
measurement display is stable.
Battery indicator
Low battery indicator
(Flashing)
The normal battery power indicator with
charge remaining.
If this symbol is displayed, replace all
four batteries with new ones.
Bluetooth®Communication Symbol
Battery indicator
Stable Symbol
Communication
Symbol
Unit
Bluetooth®
E-6
Installing (or replacing) the batteries
1. Open the battery compartment cover on
the underside of the scale.
2. Install four new AAA size alkaline batteries
with the positive (+) and negative (-)
terminals properly aligned with the
corresponding symbols in the battery
compartment.
3. Close the battery compartment cover.
Caution
• Install each battery with the positive (+) and negative (-) terminals properly aligned with the corresponding symbols in
the battery compartment.
• Improper installation of the batteries may cause battery leakage.
• Replace all four batteries with new ones, when the , symbol is displayed.
• Do not mix new and used batteries. It may cause damage to the scale or shorten the battery life.
• Be sure to use AAA size alkaline batteries. Do not use any other type of battery.
• Never use rechargeable batteries with this scale.
• The battery life is dependant upon the environmental temperature, battery type and usage.
• The batteries provided with the device are for testing the scale performance and may have a limited life.
• Remove the batteries from the battery compartment, when the scale is not to be used for a long time. Storing the scale
with the batteries installed may result in battery uid leaking from the batteries, causing damage to the scale. The
supplied batteries are for checking operation of the scale and may have a short lifespan.
Automatic Power off Function
The scale has an "Automatic power-off" function.
After the measurement results are displayed for 60 seconds, the scale is automatically turned off.
E-7
Connecting to a mobile device (Pairing)
This scale needs to be registered with a receiver in order to use Bluetooth®
communication with the receiver. The process of registering this scale with a
receiver is known as pairing. When pairing is completed, measurement data from
this scale is automatically sent to the paired device each time a measurement is
made when the receiver is in the state in which it can receive transmissions.
Consult the receiver instruction manual and set it to enable pairing. If the receiver
has a “pairing wizard”, use the wizard to complete pairing. Place the receiver and
this scale as close as possible to carry out pairing.
1. Install four AAA size alkaline batteries into this
scale.
• For details, see “Installing (or Replacing) the
Batteries”.
2. Conrm that the scale is turned off, and press
and hold the set switch..
• When the set switch is continuously pressed,
“Pr” is displayed.
3. Release the set switch when “Pr” is displayed.
• “ ” ashes.
• This scale is discoverable by the receiver.
• Pairing can be skipped press the set switch
when “Pr” is displayed.
4. Start pairing on the receiver.
• Follow the pairing instructions for the receiver
to search for, select and pair with this scale.
5. Conrm that “End” is displayed.
Once paired, changing batteries should not require re-pairing.
Beep
Beep beep
E-8
Cautions for Pairing
• Turn the power of other Bluetooth®devices off when performing pairing.
• If measurement data cannot be received, try pairing again.
• After pairing is complete, all communications are done automatically if the receiver is in the receivable state.
• In the unlikely event that this scale causes radio wave interference to another wireless station, either change the
location where the scale is used or stop using the scale immediately.
Setting the Units
1. Conrm that the scale is turned off, and press the
set switch.
2. Press the set switch to select the unit that you want
to set.
• The unit changes each time the set switch is
pressed.
• Wait for 3 seconds after setting the unit.
3. Conrm that “End” is displayed.
• The settings are saved.
• After three seconds of non-operation, the scale
conrms the selected unit with two beeps,
displays “End ” and automatically turns off.
4. If you to wish to delete any readings stored in
memory press the set switch. Changing the units
format will delete any stored readings on the scale.
Nota: to see readings stored in memory they must be transferred
to your mobile device and displayed in the reciever's application.
lb
lb
kg
Beep
Beep beep
E-9
Measuring your Weight
Step On Weighing
1. Conrm that the scale is turned off, and step on the
scale gently.
• Measurement starts when you step on the scale.
• A progress bar is displayed during measurement.
Stand up straight and remain as still as possible
during measurement.
2. Step off the scale when “StEP” and “oFF” are
alternately displayed with three beeps.
• If you do not step off, the scale beeps every two
seconds.
• The scale turns off automatically after 2 minutes.
• All display segments are indicated when you step
off the scale.
• Do not touch the scale while all display segments
are indicated. It may cause misreading.
3. Conrm the measurement results.
• The scale turns off automatically 60 seconds after
the measurement results are displayed.
• Data is automatically sent to the receiver if the
receiver is in the receivable state.
• If the scale is not paired with a receiver, the data
is stored in the scale memory. (See “Transmitting
Temporarily Stored Data”.)
• Data stored in the scale memory cannot be
viewed on this scale.
• You can also shut the power off by pressing the
set switch.
• Most recent readings will be shown on the screen.
SMART
SMART
Beep
Beep beep beep
lb
lb
kg
E-10
Other Functions
Transmitting Temporarily Stored Data
If measurement data cannot be sent to a receiver, this scale can temporarily
store data of a maximum of 90 measurements in the built-in memory. When the
scale is able to transmit to a receiver, all of the data is transmitted. If the amount
of data temporarily stored exceeds 90 measurements, the oldest data is deleted
and replaced with new data.
• Stored data cannot be viewed on this scale.
• The amount of data that can be temporarily stored may vary with the
application.
Bluetooth®Transmission
This product is equipped with a Bluetooth®wireless function and can connect to
the following Bluetooth®devices.
• Continua certied devices
• iPhone, iPad, iPod (iPhone 4S or later)
• Applications and devices that are compatible with Bluetooth®4.0
Each device needs an application to receive data..
For connection methods, refer to the manual for each device.
Bluetooth®Smart devices carry the Bluetooth®Smart logo mark.
Continua certied devices carry the Continua logo mark.
Tabla de contenidos
Idiomas:
Otros manuales de Escala de A&D
A&D
A&D EJ-123 Manual de usuario
A&D
A&D FC-500 Manual de usuario
A&D
A&D AD-6121ABT1 Manual de usuario
A&D
A&D HT-300 Manual de usuario
A&D
A&D HT-120 Manual de usuario
A&D
A&D GX-1603A Manual de uso y cuidado
A&D
A&D BA Series Manual de usuario
A&D
A&D Titan HW-200K-WP Manual de usuario
A&D
A&D SJ-2000H Manual de usuario
A&D
A&D UC-350BLE Manual de usuario
A&D
A&D GX-L Series Manual de usuario
A&D
A&D SJ-1000H Manual de usuario
A&D
A&D GF-30K Manual de usuario
A&D
A&D SJ-12KH Manual de uso y cuidado
A&D
A&D UC-352BLE Manual de usuario
A&D
A&D UC-321PL Manual de usuario
A&D
A&D HL-200i Manual de usuario
A&D
A&D HD-12KB Manual de usuario
A&D
A&D EK-300EP Manual de usuario
A&D
A&D HD-12K Manual de usuario
