4xem IPVS1E Manual de usuario
- 1 -
Before You Use This Product
The use of surveillance devices may be prohibited by law in your country. The Video
Server is not only a high-performance web-ready camera but also can be part of a
flexible surveillance system. It is the user’s responsibility to ensure that the
operation of such devices is legal before installing this unit for its intended use.
It is important to first verify that all contents received are complete according to the
list in the "Package Contents" chapter. Take notice of the warnings in “Quick
installation guide” before the Video Server is installed, then carefully read and follow
the instructions in the “Installation” chapter to avoid damages due to faulty assembly
and installation. This also ensures the product is used properly as intended.
The Video Server is a network device and its use should be straightforward for those
who have basic network knowledge. The “Troubleshooting” chapter in the Appendix
provides remedies to the most common errors in set up and configuration. You
should consult this chapter first if you run into a system error.
The Video Server is designed for various applications including video sharing, general
security/surveillance, etc. The “How to Use” chapter suggests ways to best utilize
the Video Server and ensure proper operations. For the creative and professional
developers, the "URL Commands of The Video Server " chapter serves to be a helpful
reference to customize existing homepages or integrating with the current web
server.
For paragraphs preceded by the reader should use caution to understand
completely the warnings. Ignoring the warnings may result in serious hazards or
injuries.
- 2 -
Table of Contents
Before You Use This Product......................................................................1
Package Contents....................................................................................5
Physical Description.................................................................................6
Front Panel .......................................................................................6
BNC video input ...........................................................................6
RCA audio input ...........................................................................7
Status LED ..................................................................................7
Rear Panel ........................................................................................7
Ethernet 10/100 socket.................................................................7
General I/O terminal block.............................................................7
Restore button.............................................................................8
Power adapter..............................................................................8
Installation.............................................................................................9
Hardware installation..........................................................................9
Cable connection..........................................................................9
Power on.....................................................................................9
Software installation.........................................................................10
Initial Access to the Video Server .......................................................12
Check Network Settings ..............................................................12
Add Password to prevent Unauthorized Access................................12
How to Use .....................................................................................13
Authentication............................................................................13
Installing plug-in..............................................................................14
Primary user’s capability ...................................................................15
Main screen with camera view......................................................15
Digital Zoom..............................................................................16
Digital Output ............................................................................16
Snapshot...................................................................................16
Client settings............................................................................17
Administrator’s capability ..................................................................19
Fine-tuning for Best Performance..................................................19
Opening accounts for new users ...................................................21
- 3 -
Change homepage layout ............................................................22
Build a multimedia web attraction site ...........................................28
Build a security application ..........................................................32
Software revision upgrade ...........................................................35
Definition in Configuration ......................................................................36
System parameters..........................................................................37
Security settings..............................................................................38
Network settings..............................................................................39
General.....................................................................................39
SMTP........................................................................................39
FTP ..........................................................................................40
HTTP ........................................................................................40
Streaming .................................................................................41
DDNS and UPnP settings...................................................................42
Video codec parameters....................................................................43
Motion detection..............................................................................45
Application settings..........................................................................46
Weekly schedule.........................................................................46
Event operation..........................................................................46
Sequential operation...................................................................47
Homepage layout settings.................................................................48
Viewing system log ..........................................................................49
Viewing system parameters...............................................................49
Restore factory default settings..........................................................49
Appendix..............................................................................................50
A. Troubleshooting ...........................................................................50
Status LED ................................................................................50
Reset and restore .......................................................................50
B. Frequently asked questions ...........................................................51
C. URL commands of the Video Server ................................................54
Capture update Snapshot of JPEG image........................................54
Query status of the digital input ...................................................54
Drive the digital output ...............................................................54
Restore factory default settings ....................................................54
- 4 -
Restart system...........................................................................55
Page URL ..................................................................................56
System resource URL..................................................................56
General format of command URL ..................................................57
System configuration URL............................................................57
Security configuration URL...........................................................58
Network configuration URL...........................................................58
Video configuration URL ..............................................................60
Image quality configuration URL ...................................................61
Application configuration URL.......................................................62
Homepage layout configuration URL ..............................................63
D. Technical specifications .................................................................64
- 5 -
Package Contents
Video Server IPVS1E
Power adapter
I/O terminal block connector
Software CD
- 6 -
Physical Description
Front Panel
BNC video input
75Ohms resistance video port for connecting an external camera. To ensure video
modulation type being correctly detected, cameras should be attached and powered on
before the Video Server is powered on.
- 7 -
RCA audio input
The audio input is connected by RCA connector of mono-audio Line-In signal.
Status LED
The Video Server provides a LED to show its status. Please refer to the appendix
"Troubleshooting” for detail.
Rear Panel
Ethernet 10/100 socket
Connect to Ethernet network with a UTP category 5 cable that cannot exceed 100
meters.
General I/O terminal block
1 DI- INPUT (Initial state of DI is low)
2 DI+ INPUT (Max. 50mA, 12VDC)
3 SW_COMMON OUTPUT (open from SW_OPEN at initial state)
(close with SW_OPEN when set DO to ON)
4 SW_NOPEN OUTPUT (Max. 1A, 24VDC or 0.5A, 125VAC)
The Video Server provides a general I/O terminal block with one digital input and one
relay switch for device control. Pin 1 and pin 2 can be connected to an external sensor
and the state of voltage will be monitored from the initial state 'LOW'. The relay switch
of pin 3 and pin 4 can be used to turn on or off the external device.
Consult with the dealer of the peripherals for correct installation.
- 8 -
Restore button
There is a button hidden in the box for restoring the system factory default settings.
Please refer to the appendix "Troubleshooting” for detail.
Power adapter
Connect the power jack of the included power adapter. Connecting the power adapter
should be the last operation while physically installing the Video Server.
- 9 -
Installation
Hardware installation
Before installing multiple Video Servers at the well-chosen locations, the Administrator
should memorize the serial numbers on the packages respectively for future use.
Cable connection
Shut down all the peripheral devices prior to connection.
Connect the supplied cables from the Video Server to
related devices according to the figure. The Ethernet cable
should meet UTP category 5 that cannot exceed 100
meters.
Power on
Make sure all cables are correctly and firmly connected before turning on the Video
Server. Turn on cameras, sensors, alarm devices, and then attach the power adaptor of
the Video Server to the electric power socket. As soon as the power adapter is plugged
into the utility socket, the front LED will switch between green and red for several times.
After passing the self-test, the LED will be green and the Video Server will standby for
getting IP address. After getting IP Address, the LED will blink green every second.
Otherwise refer to Appendix A for troubleshooting.
Connect the jack of the power adapter to Video Server prior to plugging the utility
end into the utility power socket. It will reduce accidental electric surge shock.
Tabla de contenidos
Otros manuales de Servidor de 4xem
