4IPNET HSG200 Manual de usuario

HSG200 V1.10

Wireless Hotspot Gateway

4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

Quick Installation Guide

HSG200 802.11n/b/g Wireless Hotspot Gateway ENGLISH

This document is protected by USA copyright laws and other laws and is the property of

4IPNET, INC. You may not copy, reproduce, distribute, publish, display, perform, or

modify any part of this publication in any form or by any means without prior written

permission from 4IPNET, INC. You may not alter or remove any copyright or other notice

from copies of the content. All other brand and product names are claimed or

registered marks of their respective companies or organizations.

4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

Quick Installation Guide

HSG200 802.11n/b/g Wireless Hotspot Gateway ENGLISH

FCC CAUTION

This equipment has been tested and proven to comply with the limits for a class B digital device, pursuant

to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

---Reorient or relocate the receiving antenna.

---Increase the separation between the equipment and receiver.

---Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

---Consult the dealer or an experienced radio/TV technician for help.

The device contains a low power transmitter which will send out Radio Frequency (RF) signal when transmitting.

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This

equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and

your body.

4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

Quick Installation Guide

HSG200 802.11n/b/g Wireless Hotspot Gateway ENGLISH

CE CAUTION

Declaration of Conformity with Regard to the 1999/5/EC (R&TTE Directive) for

European Community, Switzerland, Norway, Iceland, and Liechtenstein

Model: HSG200

For 2.4 GHz radios, the device has been tested and passed the requirements of the following standards, and hence

fulfills the EMC and safety requirements of R&TTE Directive within the CE marking requirement.

• Radio: EN 300.328:

• Radio: EN 50392

• EMC: EN 301.489-1, EN 301.489-17,

• EMC: EN 55022Class B, EN 55024:+ A1 + A2including the followings:

EN 61000-3-2, EN 61000-3-3.

EN 61000-4-2, EN 61000-4-3, EN 61000-4-4,

EN 61000-4-5, EN 61000-4-6, EN 61000-4-11

• Safety: EN 60950-1 + A11,

Caution:

This declaration is only valid for configurations (combinations of software, firmware, and hardware)

provided and supported by 4ipnet Inc. The use of software or firmware not provided and supported

by 4ipnet Inc. may result in the equipment no longer being compliant with the regulatory

requirements.

European standards dictate maximum radiated transmit power of 100mW EIRP and frequency range

2.400-2.4835 GHz. This equipment is intended to be used in all EU and EFTAcountries. Outdoor use may

be restricted to certain frequencies and/or may require a license for operation. Contact your local

regulatory authority for compliance.

Taiwan NCC Statement

根據 NCC 低功率電波輻射性電機管理辦法規定:

第十二條經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或

變更原設計之特性及功能。

第十四條

低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時應立即停用，並改善至

無干擾時方得繼續使用。

前項合法通信，指依電信法規定作業之無線電通信。

低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之擾。

4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

Quick Installation Guide

HSG200 802.11n/b/g Hotspot Gateway ENGLISH

Preface

The HSG200 is the most economical and feature rich Wireless Hotspot

Gateway, targeting mini-size stores that want to provide small, single-point

wireless Internet access service. HSG200 is a perfect choice for beginners to run

hotspot businesses. It does not cost much compared to buying a pile of

equipments, nor does it take the skills of an expert to glue multiple applications out

of multiple freeware. Feature-packed for hotspot operation, HSG200 comes with

built-in 802.11 n/b/g MIMO access point, web server and web pages for

clients to login, easy logo-loading for branding a hotspot store, simple

user/visitor account management tool, payment plans, multiple credit card

payment gateways, traffic logs, IP sharing and etc. HSG200 also brings in an

extra advantage - the wall-mountable, dust-proof (IP50) metal housing.

This Quick Installation Guide provides instructions and reference materials for

getting started with HSG200.

Package Contents

1. HSG200 x 1

2. Quick Installation Guide x 1

3. CD-ROM

(with User Manual and QIG) x 1

4. Console Cable x 1

5. Ethernet Cable x 1

6. Power Adapter (DC 12V) x 1

7. Rubber Antenna x 2

8. Wall mounting Kit x 1

9. Ground Cable x 1

It is recommended to keep the original packing material for possible future shipment when repair

or maintenance is required. Any returned product should be packed in its original packaging to

prevent damage during delivery.

4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

Quick Installation Guide

HSG200 802.11n/b/g Hotspot Gateway ENGLISH

System Overview

Front Panel

1 USB For future usage only.

2 WES Press to start running WES (WDS Easy Setup) process.

3 Console Attach the RS-232 console cable here, for management use only.

4 LAN1/LAN2 Attach Ethernet cables here for connecting to the wired local

network. LAN1 maps to Private Zone and requires no user

authentication, LAN2 maps to Public Zone and by default

requires user authentication.

5 WAN (PoE) Attach the wired external network here. This port supports Power

over Ethernet (PoE) for flexible installation.

6 Reset Hardware reset button, press once to restart the system.

7 Power Socket

(12VDC/1A)

For connecting to external power supply via the power adapter.

Rear Panel

2 Antenna Connector Attach antennas here. HSG200 supports 1 RF interface with 2

SMA connectors.

4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

Quick Installation Guide

HSG200 802.11n/b/g Hotspot Gateway ENGLISH

Top LED Panel

1 LED ON indicates power on; OFF indicates power off.

2 LED ON indicates WAN connection; OFF indicates no connection;

BLINKING indicates transmitting data.

3 LED ON indicates LAN1/LAN2 connection; OFF indicates no

connection; BLINKING indicates transmitting data.

4 LED ON indicates wireless ready.

LED ON indicates outbound internet connection is alive; LED OFF

indicates that outbound internet connection is down. The detection

interval is 1 minute; hence it reflects the connection status within the

last minute.

For indicating WES status during WES setup:

Master Slave

WES Start LED BLINKING SLOWLY LED BLINKING

QUICKLY

WES Negotiate LED BLINKING SLOWLY LED BLINKING

QUICKLY

WES Fail (Negotiate

Timeout) LED OFF LED OFF

WES Success LED ON for over 5

seconds

LED ON for over 5

seconds (after Master

displays WES Success)

7 For future usage only.

4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

Quick Installation Guide

HSG200 802.11n/b/g Hotspot Gateway ENGLISH

Hardware Installation

Please follow the steps mentioned below to install the hardware of HSG200:

1. Place the HSG200 at a best location.

The best location for HSG200 is usually at the center of your wireless network.

2. There are two ways to supply power over to HSG200.

(a) Connect the DC power adapter to the HSG200 power socket on the front panel.

Please only use the power adapter supplied with the HSG200

package. Using a different power adapter may damage this

system.

(b) HSG200 is capable of receiving DC current via its WAN PoE port. Connect an

IEEE 802.3af-compliant PSE device, e.g. a PoE-switch, to the WAN port of

HSG200 with an Ethernet cable.

3. Connect HSG200 to your outbound network device.

Connect one end of the Ethernet cable to the WAN port of HSG200 on the front panel.

Depending on the type of internet service provided by your ISP, connect the other end

of the cable to the ATU-Router of an ADSL, a cable modem, a switch or a hub. The

WAN LED indicator should be ON to indicate a proper connection.

4. Connect HSG200 to your network device.

Connect one end of the Ethernet cable to the LAN1 port of HSG200 on the front

panel. Connect the other end of the cable to a PC for configuring the system. The

LAN1 LED indicator should be ON to indicate a proper connection.

Note: HSG200 has two virtual zones Private and Public which are mapped to

LAN1(192.168.1.254) and LAN2(192.168.11.254) respectively.

Now, the hardware installation is completed.

To double verify the wired connection between HSG200 and your

switch/router/hub, please check the LED status indication of these

network devices.

4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

Quick Installation Guide

HSG200 802.11n/b/g Hotspot Gateway ENGLISH

Getting Started

HSG200 supports web-based configuration. Upon the completion of hardware installation,

HSG200 can be configured through a PC by using its web browser with JavaScript

enabled such as Internet Explorer version 6.0.

Default LAN interface IP address:

LAN1 (192.168.1.254) mapped to Private Zone, no authentication required for users.

LAN2 (192.168.11.254) mapped to Public Zone, authentication required for users.

Note: The instructions below are illustrated with the administrator PC

connected to LAN1.

Steps:

1. Once the hardware installation is complete, set DHCP in TCP/IP settings of the

administrator PC to “Obtain an IP address automatically”. Connect the PC to the

LAN1 Port of HSG200. An IP address will be assigned to the PC automatically via the

HSG200 built-in DHCP server.

2. Launch a web browser to access the web management interface of HSG200 by

entering “https://192.168.1.254” or “http://192.168.1.254” in the address field.

Note: “https” is used for a secured connection.

3. The following Administrator Login Page will then appear. Enter “admin” (the default

value) in the Username and Password fields, and then click Login to log in.

4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

Quick Installation Guide

HSG200 802.11n/b/g Hotspot Gateway ENGLISH

4. The Home Page will appear after a successful login.

Note: To logout, simply click Logout at the upper right hand corner of the

interface to return to the Administrator Login Page.

4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

Tabla de contenidos

Otros manuales de Puerta de 4IPNET

4IPNET

4IPNET HSG100 Manual de usuario

4IPNET

4IPNET WHG201 Manual de usuario

4IPNET

4IPNET HSG326 Manual de usuario

4IPNET

4IPNET HSG320 Manual de usuario

4IPNET

4IPNET HSG1250 Manual del operador

4IPNET

4IPNET WHG315 Manual de usuario

4IPNET

4IPNET HSG326 Manual de usuario

4IPNET

4IPNET HSG327 Manual de usuario

4IPNET

4IPNET HSG1250 Manual de usuario

4IPNET

4IPNET HSG3200 Manual de usuario

Manuales populares de Puerta de otras marcas

LST

LST M500RFE-AS Manual de usuario

Kinnex

Kinnex Media Gateway Manual de usuario

2N Telekomunikace

2N Telekomunikace 2N StarGate Manual de usuario

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manual de usuario

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manual de usuario

Telsey

Telsey CPVA 500 - SIP Manual de usuario

RTA

RTA 460A-NNA4 Hoja de especificaciones

Shaw

Shaw Gateway HDPVR Manual de usuario

ABB

ABB VSN900 Guía de inicio rápido

Commander

Commander Pulse Manual de usuario

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manual de usuario

NETGEAR

NETGEAR C6300BD Manual de usuario

Amit

Amit CDW531AM Manual de usuario

HMS

HMS Netbiter EasyConnect EC150 Manual de usuario

Huawei

Huawei EchoLife HG620 Manual de usuario

AT&T

AT&T U-verse 3801 Manual de uso y cuidado

Logic IO

Logic IO RTCU MX2 turbo Manual de usuario

Suttle

Suttle MediaMAX MXM-521 Manual de usuario