3M 8511 Manual de usuario

8511/8211/07185*

Particulate Respirator N95

Respirador para partículas N95

User Instructions / Instrucciones

IMPORTANT: Keepthese User Instructions

*07185 isa catalog number only.NIOSH approvedas 3M 8511

Particulate Respirator N95. See insert for approvallabel.

IMPORTANTE: Conserve estas Instrucciones

para referencia futura.

See insert for approvallabel.

Consulte la etiqueta de aprobaciónenelinserto.

98-0060-0125-3_3

WARNING

This respirator helps protect against

certain particles. Misuse may result in

sickness or death.For proper use, see

supervisor, or User Instructions,or call 3M

in U.S.A., 1-800-247-3941.In Canada,call

Technical Service at 1-800-267-4414.

ADVERTENCIA

Este respirador ayuda a proteger contra

ciertas partículas. El mal uso puede

ocasionar enfermedadoincluso la

muerte. Para su uso adecuado consulte a

su supervisor, lea lasInstrucciones, o llame

a 3Men EUA al 1-800-247-3941.In. En

Canadá llame al Servicio Técnico al 1-800-267-4414. En México

llame al 01-800-712-0646; o contacte a 3M en su país.

Website:www.3M.com/PPESafety

Technical Assistance: 1-800-243-4630

For other 3M products: 1-800-3M-HELPSor 1-651-737-6501

PARA OBTENER MÁS INFORMACIÓN

En Estados Unidos: Internet: www.3M.com/PPESafety

Internet: www.3m.com.mx/saludocupacional

O llame a 3Men su localidad.

IMPORTANT

Before use, wearer must readand understand these User

Particles such asthose from grinding, sanding, sweeping,sawing,

bagging,or processing minerals, coal,ironore,ﬂour, metal,wood,

pollen, and certainother substances.Liquid or non-oil based

particlesfrom spraysthat do not also emit oil aerosolsor vapors.

Follow all applicable local regulations. For additional information

on 3M use recommendations for this class of respirator please

consult the 3M Respirator SelectionGuide found onthe 3M

Personal Safety Divisionwebsite at www.3M.com/PPESafety or call

1-800-243- -800-267-4414.

Do not use for gasesand vapors,oil aerosols,asbestos, or

sandblasting; particulate concentrations that exceedeither 10

times the occupational exposure limit or applicable government

regulations, whichever islower. Inthe U.S., do not use when the

Occupational Safety and Health Administration(OSHA) substance

speciﬁc standards,such as those for, arsenic, cadmium, leadinthe

constructionindustry, or 4,4’-methylene dianiline (MDA),specify

other types of respiratory protection. This respirator does not

This respirator can help reduce inhalationexposuresto certain

airborne biological particles(e.g. mold, Bacillus anthracis,

Mycobacterium tuberculosis, etc.) but cannot eliminate the

risk of contracting infection, illnessor disease. OSHA and other

government agencies have not established safe exposure limitsfor

1. Failure to follow all instructions and limitations onthe use of this

respirator and/or failure to wear this respirator during all timesof

may result in

2. In the U.S., before occupational use of this respirator, a written

respiratory protection program must be implementedmeeting

all the requirements of OSHA 29 CFR 1910.134 such astraining,

ﬁt testing,medical evaluation, and applicable OSHA substance

speciﬁc standards.In Canada, CSA standard Z94.4requirements

must be met and/or requirements of the applicable jurisdiction,

3. The particles which canbe dangerous to your health include

4. Leave the contaminatedarea immediately and contact

5. Store the respirator away from contaminatedareaswhen not

6. Inspect respirator before eachuse to ensure that it isin good

operating condition. Examine all the respirator parts for signs

of damage including the two headbands, staples,exhalation

valve and noseclip. The respirator should be disposedof

immediately upon observationof damaged or missing parts.

Filtering facepieces are to be inspected prior to each use to

assure there are no holesinthe breathing zone other than

the puncturesaround staplesand no damage has occurred.

Enlarged holes resulting from ripped or torn ﬁlter material

around staple punctures are considered damage. Immediately

NIOSH approval.

7. Conduct a user sealcheck before use as speciﬁed inthe Fitting

Instructions section. If you cannot achieve a proper seal,do

not use the respirator.

8. Dispose of used product inaccordance with

1. This respirator does not supply oxygen. Do not use in

2. Do not use when concentrations of contaminants are

immediately dangerous to life or health, are unknown or when

concentrations exceed 10 timesthe permissible exposure limit

(PEL) or according to speciﬁc OSHA standards or applicable

4. Do not use with beards or other facial hair or other conditions

that prevent a good seal betweenthe face and the sealing

5. Respirators can help protect your lungs against certainairborne

contaminants, They will not prevent entry through other routes

such as the skin, which would require additional personal

6. This respirator is designed for occupational/professional use by

adults who are properly trained intheir use and limitations. This

7. Individuals witha compromised respiratory system,such as

asthma or emphysema,should consult a physicianand must

8. When storedinaccordance withtemperature and humidity

conditions speciﬁedthe product may be used until the “use by”

Before use, store respirators inthe original packaging, away

from contaminatedareas, dust, sunlight, extreme temperatures,

excessive moisture and damaging chemicals. When storedin

accordance withtemperature and humidity conditions speciﬁed

the product may be used until the “use by” date speciﬁed on

packaging. Always inspect product and conduct a user seal check

before use as speciﬁed in User Instructions. If you cannot achieve

End of Shelf Life

Use respirators before the “use by” date speciﬁed

Storage Temperature Range

-20°C (-

If respirator becomes damaged, soiled, or breathing becomes

respirator.

+86˚F

+30˚C

-4˚F

-20˚C

<80%

Must befollowed each time respirator is worn.

1. Cup the respirator inyour hand, withthe nosepiece at your

ﬁngertips,allowing the headbands to hang freely below your

2. Positionthe respirator under your chin withthe nosepiece up.

Pull the topstrap over your headresting it high at the top back

of your head. Pull the bottom strap over your headand positionit

3. Place your ﬁngertips from both hands at the topof the metal

nosepiece. Using two hands,moldthe nose area to the shape of

your nose by pushing inward while moving your ﬁngertips down

bothsides of the nosepiece (Fig. 3).

Pinchingthe nosepiece using one hand may result in

4. Perform a User Seal Check prior to each wearing. To check

the respirator-to-face seal, place both hands completely over

the respirator and inhale sharply.Be careful not to disturb

the positionof the respirator. A negative pressure should be

felt inside the respirator. If air leaksaround nose,readjust the

nosepiece as described in step 3. If air leaks at the respirator

edges, work the straps back along the sides of your head.

If you CANNOT achieve a proper seal,DONOT enter the

See step2of Fitting Instructions and cup respirator in hand

to maintain positiononface.Pull bottom strap over head. Still

holding respirator in position, pull topstrap over headand

Fig. 1 Fig. 2

Fig. 3 Fig. 4

IMPORTANTE

Antes de usar el producto,el usuario debe leer y entender estas

Para partículas, como las presentes entrabajos de lijado,

esmerilado, barrido, aserrado, embolsado o procesamiento de

minerales,carbón, mineral de hierro, harina, metal,madera, polen

y algunas otras sustancias. Partículas líquidas o partículas que no

sean base aceite de aerosoles que tampoco emitanaerosoles o

vapores de aceite. Siga las regulaciones locales correspondientes.

Para mayores informes sobre las recomendaciones de uso de

3M para esta clase de respirador, favor de consultar la Guía de

selección de respiradores3Menel sitio de la División de Seguridad

Personal www.3M.com/PPESafety o llame a 3M en EUA al

1-800-243-4630. En Canadá llame al 1-800-267-4414. En México

llame al 01-800-712-

No use para gases y vapores,aerosoles de aceite,asbestos

o sandblasteo; concentraciones de partículas que excedan

gubernamentales aplicables,lo que sea menor. En Estados Unidos

no use cuando las normas para sustancias especíﬁcas de la

Administración de Seguridad y Salud Ocupacional (OSHA por sus

siglas eninglés), como arsénico, cadmio, plomo enla industria de

la construccióno 4,4’-metilen dianilina (MDA), indiquen otro tipo de

Otros manuales para 8511

Este manual sirve para los siguientes modelos

Tabla de contenidos

Idiomas:

Otros manuales de Sensor de seguridad de 3M

3M MACURCO GD-2 Manual de usuario

3M DBI SALA 8705 Series Instrucciones de instalación

3M DBI-SALA LAD-SAF Manual de usuario

3M DBI-SALA Nano-Lok XL Series Manual de usuario

3M SD-200 Manual de usuario

3M DBI Sala EXOFIT XP Manual del operador

3M LAD-SAF Manual de usuario

3M Dynatel 2273M-iD Series Manual de usuario

3M Dynatel 2210 Manual de usuario

3M 600 Series Manual de usuario

3M Macurco CM-E1 Manual de usuario

3M WL-AD-2002-A Manual de usuario

3M DBI-SALA ExoFit NEX Manual de operación y mantenimiento

3M DBI SALA LAD-SAF X3 Manual de usuario

3M Versaflo M-973 Manual de usuario

3M DBI SALA 2108406 Manual del operador

3M Faceshields Manual de usuario

3M MACURCO GD-6 Manual de usuario

3M DBI SALA Pro Series Manual de usuario

3M 740 Guía

3M Nano-Lok Edge Series Manual de usuario

3M 8516 Manual de usuario

3M Petrifilm 6402 Hoja de instrucciones

3M DBI-SALA 2190071 Manual del operador

Manuales populares de Sensor de seguridad de otras marcas

THORLABS

THORLABS PDA10JT Manual de usuario

Waeco

Waeco UV-DETECT Manual de usuario

Intermatic

Intermatic IOS-DSIMF Manual de usuario

urmet domus

urmet domus 1083 Manual de usuario

Siemens

Siemens AZL66 Series Manual de usuario

BTI

BTI Profiline Multi Finder Manual de usuario

Challenger

Challenger SL01 Manual de usuario

DMP Electronics

DMP Electronics 1122INT Manual de usuario

Rielta

Rielta Ladoga MK-RK Manual de usuario

Mirion Technologies

Mirion Technologies ACCURAD PRD Manual de usuario

Bosch

Bosch DS835 Manual de usuario

DBI SALA

DBI SALA EZ Stop Manual del operador

Lamptime

Lamptime ST05C Manual de usuario

Ubiquiti

Ubiquiti MFI-MSC Manual de usuario

Subsite

Subsite 910R Instrucciones de instalación

Satel

Satel OPAL Pro Manual de usuario

Aleph

Aleph XC-1XTEU Manual de usuario

Pima

Pima LARIS QUAD Manual de usuario