3devo SHR3D IT Manual de usuario
SHR3D IT
SAFETY INSTRUCTIONS
Version 1.0 November 2017
English user guide
2
1. SAFETY INSTRUCTIONS
The SHR3D IT is a powerful and effective plastic processing machine.
Processing your plastic waste plastic to granulate,
The process inside the SHR3D IT consist of a multitude of moving
components, moving at high speeds and/or great force. Which if
improperly used can cause serious harm.
Read and adhere to all safety instructions and user instructions carefully
before using the machine. Do not allow persons younger than 18 years
old to use the machine. This machine is not intended for users with a low
reaction response time, physical or intellectual impairments. The
manufacturer is not liable for any damage or other problems caused by
the user’s failure to observe these instructions.
3
⚠WARNING
Ear protection must always be used when using SHR3D IT. Especially
processing hard materials will emit a lot of noise which may cause
hearing loss.
⚠WARNING
Always inspect datasheets from the materials that are to be processed for
potential health risks. When working with an unknown material or
materials that may emit dangerous dust or gasses when being
processed, make sure to wear a gas mask and use an extraction system.
⚠WARNING
Prevent entanglement when feeding long lengths of material by breaking
it down into lengths of max 1 meter.
⚠WARNING
Do not leave the SHR3D IT in operation unattended.
4
⚠WARNING
Single person lift could cause injury. Use assistance when moving or
lifting.
⚠WARNING
Never modify or manipulate any of the safety switches or other
components of the machine, this can cause extremely dangerous
situations.
⚠WARNING
Only use the SHR3D IT with the 3devo hopper mounted on the machine.
⚠WARNING
Never change or remove guards when the machine is powered.
⚠WARNING
Inspect datasheets of the to be processed materials for flammability.
Some plastics can emit flammable dust or gasses that have potential
ignition risks. Always make sure to have a fire distinguisher nearby and
know how to use it.
5
⚠CAUTION
The machine is designed to process plastics only. Any non-plastic
materials that are inserted in the machine can cause the machine blades
to degrade fast. Non-plastic materials can also damage the machine
itself. Always make sure the plastic parts do not contain any non-plastic
pieces or particles.
⚠CAUTION
Never use the Shredder compartment latch when the Filter screen is not
installed.
⚠CAUTION
Check if the voltage in your power socket corresponds to that of the
purchased product. Consult the sticker on the back of the machine.
Otros manuales para SHR3D IT
2
Tabla de contenidos
Otros manuales de Trituradora de papel de 3devo
Manuales populares de Trituradora de papel de otras marcas
Swingline
Swingline STACK-AND-SHRED200X&200XL 60X Manual de instrucciones
GBC
GBC ShredMaster CC055 Manual de usuario
UNITED OFFICE
UNITED OFFICE UAV 190 A1 Manual de usuario
UNITED OFFICE
UNITED OFFICE UAV 190 A1 Manual de usuario
Rexel
Rexel Optimum AutoFeed+ 45X Manual de usuario
Martin Yale
Martin Yale 227284S1 Manual de usuario
