2gig Technologies Go Control 2GIG-CNTRL2 Manual de usuario

Z-Wave Home Services

Operation &

User’s Guide

Wireless Security System

2GIG-CNTRL2

Congratulations on your ownership of an Go!Control Security System!

This wireless system offers protection for your property against burglary,

protection for yourself and family with 24-hour emergency monitoring, and

optionally ﬁre and carbon monoxide detection for your home.

With the system’s built-in Z-Wave®home automation capability, you can

control your Z-Wave®enabled household lights and appliances from the

Control Panel or from a portable Z-Wave remote controller.

An exciting feature of the Go!Control Security System is the capability to

remotely control your Z-Wave®network of devices from your own computer

using a Web browser over the Internet. This provides you with home

automation control from anywhere in the world... even through your Web

enabled cell phone or PDA! (Web remote control is an optional feature, check

with your security professional for availability with your system.)

The Go!Control Security System

Table of Contents

Home Control Network Overview

The Z-Wave Network . . . . . . . . . . . . . . . 2

Home Services Access

Home Services Button . . . . . . . . . . . . . . 3

Device Management. . . . . . . . . . . . . . . . 3

Toolbox . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Network Setup

Adding Devices . . . . . . . . . . . . . . . . . . . . 4

Naming Devices. . . . . . . . . . . . . . . . . . . . 5

Basic Operation

Binary Switches. . . . . . . . . . . . . . . . . . . . 6

Multi-level Switches . . . . . . . . . . . . . . . . 7

Viewing Thermostats . . . . . . . . . . . . . . . 8

Controlling Thermostats . . . . . . . . . . . . . 9

Setting the Mode . . . . . . . . . . . . . . . . . 9

Setting the Temperature . . . . . . . . . . . 9

Setting the Fan Mode. . . . . . . . . . . . . . 9

Scenes & Rules

Controlling Multiple Devices . . . . . . . . 10

Creating Scenes . . . . . . . . . . . . . . . . . . 10

Z-Wave Switches . . . . . . . . . . . . . . . . 10

Z-Wave Thermostats . . . . . . . . . . . . . 10

Editing Scenes . . . . . . . . . . . . . . . . . . . . 11

Changing a Device’s Action . . . . . . . 11

Removing a Device’s Action . . . . . . . 11

Renaming a Scene . . . . . . . . . . . . . . . 11

Running Scenes. . . . . . . . . . . . . . . . . . . 12

Deleting Scenes. . . . . . . . . . . . . . . . . . . 12

Triggering Devices from Events . . . . . 13

Creating Rules . . . . . . . . . . . . . . . . . . . . 13

Editing Rules. . . . . . . . . . . . . . . . . . . . . . 14

Changing a Rule’s Action. . . . . . . . . . 14

Deleting Rules . . . . . . . . . . . . . . . . . . . . 14

Network Maintenance

Removing Devices. . . . . . . . . . . . . . . . . 15

Network Diagnostics . . . . . . . . . . . . . . 16

Checking the Network . . . . . . . . . . . . 16

Advanced Setup

Advanced Toolbox. . . . . . . . . . . . . . . . . 17

Learn Controller . . . . . . . . . . . . . . . . . 17

Reset Controller . . . . . . . . . . . . . . . . . 17

View Controllers . . . . . . . . . . . . . . . . . 18

View All Devices. . . . . . . . . . . . . . . . . 18

Rediscover Network. . . . . . . . . . . . . . 19

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Important Information

Limited Warranty . . . . . . . . . . . . . . . . . . 21

FCC Regulatory Information. . . . . . . . . 21

IC Regulatory Information . . . . . . . . . . 21

Radio Compatibility . . . . . . . . . . . . . . . . 21

Home Control Network Overview

Typical Z-Wave Network

CONTROL

PANEL

Z-WAVE

THERMOSTAT

Z-WAVE

SWITCHES

WIRELESS

NETWORK

SIGNALS

NETWORK SIGNALSTRAVEL

BETWEEN THE CONTROL

PANEL AND Z-WAVE DEVICES

NETWORK SIGNALSALSO

TRAVEL DIRECTLY

BETWEEN Z-WAVE DEVICES

THE Z-WAVE NETWORK AUTOMATICALLY

ADJUSTSTHE NETWORK SIGNAL PATHS

DEPENDING ON SIGNAL CONDITIONS

The Z-Wave Network

Z-Wave®is “interoperable, two-way RF mesh networking technology”. In

plain English, Z-Wave®allows you to remotely control Z-Wave®enabled

devices in your home. Z-Wave is a registered trademark of Zensys Inc. and/or

its subsidiaries.

Z-Wave enabled devices are remote control modules that lights or appliances

plug into or accessories with built-in Z-Wave capabilities that are designed to

work with all other Z-Wave enabled devices in a home control network. Each

module can act as a wireless “repeater” that extends the range of the system

and insures that commands intended for another device in the network are

received.

The wireless range of Z-Wave devices have a standard, open-air, line-of-sight

distance of 65 feet. The actual performance in a home will depend on the

type on construction, amount of metal between devices, and the number of

Z-Wave devices that are repeating the wireless signals.

Beyond simple controlling of a single device, multiple device control

commands can be assigned using a “Scene”. A Scene can be run on its own,

or “Rules” can be assigned to trigger a Scene after a Control Panel “event”

such as arming your system or when an alarm occurs.

The Go!Control Security System’s Z-Wave Home Services has been designed

to operate with Z-Wave certiﬁed binary (on/off) switches, multi-level (dimmer)

switches, thermostats, and portable controllers available from a variety of

equipment manufacturers.

Home Services Access

Home Services Button

Home Services are accessed through the

system’s Home Screen. The Home Screen

shows the system status with icons to indicate

system conditions. It also displays the time

and date. The Home Screen displays the

SECURITY and HOME SERVICES buttons.

The Home Screen is normally displayed when

the system is disarmed. If it is not currently

being displayed, pressing the button on the

Control Panel will display the Home Screen.

Device Management

Setup and control of Z-Wave devices is accessed

by pressing the HOME SERVICES button and

using the Manage Z-Wave Devices Screen.

This screen displays buttons for Switches,

Thermostats, Rules, Scenes, and access to

the Z-Wave toolbox (Some Home Services

buttons may or may not display depending

on options selected by your Installer).

• The SWITCHES button will display

the currently included binary

and multi-level switches.

• The THERMOSTATS button will display

the currently included thermostat devices.

• The RULES button (if enabled) will

display the currently programmed

Rules that run Scenes after events.

• The SCENES button will display

currently programmed Scenes

that run device actions.

• The TOOLBOX button allows access to

the Z-Wave toolbox for setup of devices

(requires entry of the Master User Code).

Toolbox

Z-Wave setup is performed using the Toolbox.

Access the Toolbox using the following steps.

1. From the Manage Z-Wave Devices Screen, press

the TOOLBOX button.

2. Enter the Master User Code. Only the Master

User Code (or the Installer Code) can be used to

access the Z-Wave Toolbox.

✓ NOTE: Some Z-Wave display screens will

time-out after 30 seconds of inactivity and

the system will return to the Home Screen.

Manage Z-Wave Devices Screen

Z-Wave Toolbox Screen

Master Code Entry Screen

The Home Screen

Home Services

button

Network Setup

Adding Devices

Before a device will work in the home control

network, it must be added (also called included)

into the network.

To add one or more switch or thermostat

devices into the network, use the following

steps:

1. Install the Z-Wave Device as directed by the

device’s instructions. If it is a lamp or appliance

module, connect the lamp or load to the module

and be sure the power switch on the lamp or

load is ON.

2. From the Toolbox Screen, press the ADD

DEVICES button. The Control Panel will display

“Discovering devices” and wait for a signal from

a device.

3. Press and quickly release the program button

on the device. (This button may also be called

“bind”, “learn”, or may not be labeled.)

4. When the device is discovered, the display will

show its kind, type, manufacturer, and network

node information assigned to the device.

5. Repeat Steps 3 and 4 for any additional devices

that need to be added to the network at this

time.

6. Press BACK when ﬁnished.

If additional Z-Wave compatible devices are

purchased, and your home control network

expands, these steps can be used at any time

to add additional devices.

Devices can only be included once in the

network. The system will not allow a device to

be added multiple times to the same network.

Add Z-Wave Devices Screen

Pressing the Device’s Programming Button

PRESS Z-WAVE

DEVICE BUTTON

Added Devices Shown

New device

shows on

screen

Network Setup

Naming Devices

Devices in the home control network can be

named to make it easy to identify the individual

lamp or appliance being controlled. The custom

name will show on the Control Panel’s display.

To name each installed switch or thermostat

device, use the following steps:

1. From the Manage Z-Wave Devices Screen, press

the SWITCHES or THERMOSTATS button.

2. A list of installed devices will display. If there

are more than three devices, use the ↑or ↓

arrows to scroll the list.

3. Press the display where the device is listed

to display the current switch settings for the

device.

4. Press the RENAME button to display the

alphanumeric keyboard used to name the device.

5. Use the alphanumeric keyboard to assign a

name (up to 40 characters) to the device.

• Use the ↑arrow key to shift

to capital letters.

• Use the ↓arrow key to shift

to lower case letters.

• Press the 0-9 key to access numeric

and symbol characters.

• Press the a-z key to access

alphabetic characters.

• Use the DEL key to delete characters to the

right of the cursor or delete highlighted text.

• Use the BKSP key to delete characters

to the right of the cursor.

• Use the ←or →arrows to move

the cursor along the text.

6. Press OK when you are ﬁnished naming the

device.

7. Press BACK.

8. Repeat Steps 2 through 7 to name additional

devices.

9. Press BACK when ﬁnished.

Manage Z-Wave Devices Screen

Alphanumeric Keyboard Display

Installed Devices Shown

Push device button

to rename

Switch Settings Display

Push RENAME

button to

rename device

Thermostat Settings Display

Push RENAME button

to rename device

Basic Operation

Binary Switches

Binary switch modules can be turned ON or

OFF. They cannot be set to in-between levels as

multi-level (dimmer) switch modules can.

To control a binary switch module, use the

following steps:

1. From the Home Screen press the HOME

SERVICES button.

2. From the Manage Z-Wave Devices Screen, press

the SWITCHES button.

3. A list of all installed switches will be displayed.

If there are more than three switches, use the ↑

or ↓arrows to scroll the list. On the right side of

the switch button, binary switches will display

the current status of the switch (OFF or ON).

✓ NOTE: If the light or load is controlled at the

module while the Control Panel is showing

this display, press the REFRESH button to

update the display.

4. Press the display where the device is listed to

display the control buttons for the switch.

5. A check box indicates if the switch is OFF or ON.

Press the desired action for the switch (OFF or

ON). The lamp or load connected to the selected

binary switch module will follow your command.

6. Press the BACK button three times or the

button on the Control Panel to exit Home

Services.

Manage Z-Wave Devices Screen

Press

SWITCHES

button

Installed Switches Shown

Press device

button

Binary Switch Settings Display

Check box for

On or Off

Basic Operation

Multi-level Switches

Multi-level (dimmer) switch modules can be

turned ON, OFF, or set to 12 different dimming

levels.

To control a multi-level switch module, use the

following steps:

1. From the Home Screen press the HOME

SERVICES button.

2. From the Manage Z-Wave Devices Screen, press

the SWITCHES button.

3. A list of all installed switches will be displayed.

If there are more than three switches, use the ↑

or ↓arrows to scroll the list. On the right side

of the switch button, multi-level switches will

display the current status of the switch (OFF or

bars showing the dimming level).

✓ NOTE: If the light is controlled at the

module while the Control Panel is showing

this display, press the REFRESH button to

update the display.

4. Press the display where the device is listed to

display the control buttons for the switch.

5. A check box indicates if the switch is OFF or

ON. If the switch is ON, the dimming level with

a number 1-12 will be shown below the check

boxes. Press the desired action for the switch;

OFF, ON, or adjust the dimming level using the

brightness buttons at each end of the dimming

level display. The lamp connected to the

selected multi-level switch module will follow

your command.

6. Press the BACK button three times or the

button on the Control Panel to exit Home

Services.

Manage Z-Wave Devices Screen

Press

SWITCHES

button

Installed Switches Shown

Press device

button

Multi-level Switch Settings Display

Set device Off or On

Choose

dimmer level

Basic Operation

Viewing Thermostats

Z-Wave compatible thermostats can be

controlled using the Home Services feature.

✓ NOTE: Several types of Z-Wave compatible

thermostats are available. Each type

provides different features. The Control

Panel’s Home Services Z-Wave control

will adjust to the thermostat model type,

but may not support all of the thermostat’s

features.

To view the thermostat control, use the

following steps:

1. From the Home Screen press the HOME

SERVICES button.

2. From the Manage Z-Wave Devices Screen, press

the THERMOSTATS button.

3. A list of all installed thermostats will be

displayed. If there are more than three

thermostats, use the ↑or ↓arrows to scroll the

list. On the bottom line of the thermostat button,

the fan status, current mode, and current room

temperature will be displayed.

✓ NOTE: If the controls at a thermostat are

adjusted while the Control Panel is showing

this display, press the REFRESH button to

update the display.

4. Press the display where the thermostat is listed

to display the control buttons for the thermostat.

5. The display shows the current temperature, the

thermostat setpoint, the thermostat mode, and

the fan mode (if supported).

✓ NOTE: Thermostats can be powered by the

HVAC system’s 24-volt AC power source

(called a C-wire or common wire system) or

be independently powered by batteries. To

save power, battery powered thermostats

send signals to the Control Panel at

intervals and may not update the Control

Panel’s display for a short period of time.

Manage Z-Wave Devices Screen

Thermostats Screen

Thermostat Settings Screen

Press

THERMOSTATS

button

Press

thermostat’s

device button

Current setpoint Current mode

Current temperature

Tabla de contenidos

Otros manuales de Sistema de seguridad de 2gig Technologies

2gig Technologies

2gig Technologies EDGE Manual de usuario

2gig Technologies

2gig Technologies pad1 Manual de instrucciones

2gig Technologies

2gig Technologies EDGE Manual de usuario

2gig Technologies

2gig Technologies GC3 Manual de usuario

2gig Technologies

2gig Technologies WDQ PAN1345 Guía de configuración

2gig Technologies

2gig Technologies Go!Control Panel Manual de usuario

2gig Technologies

2gig Technologies Vario Manual de instrucciones

2gig Technologies

2gig Technologies GC2 Manual de usuario

2gig Technologies

2gig Technologies Go Control Manual de usuario

2gig Technologies

2gig Technologies GO!control 2GIG-CNTRL2 Manual de usuario

2gig Technologies

2gig Technologies GC3 Manual de usuario

2gig Technologies

2gig Technologies GO!control 2GIG-CNTRL2 Manual de instalación

2gig Technologies

2gig Technologies Vario Manual de usuario

2gig Technologies

2gig Technologies EDGE Manual de usuario

2gig Technologies

2gig Technologies GO!control 2GIG-CNTRL2 Manual de usuario

2gig Technologies

2gig Technologies 2GIG-CO1-345 Manual de usuario

Manuales populares de Sistema de seguridad de otras marcas

Inner Range

Inner Range Concept 2000 Manual de usuario

Climax

Climax Mobile Lite R32 Instrucciones de montaje

CADDX

CADDX NX-6 Manual de usuario

FBII

FBII XL-31 Series Manual de usuario

Johnson Controls

Johnson Controls PENN Connected PC10 Manual de usuario

Aeotec

Aeotec Siren Gen5 Manual de usuario

Blaupunkt

Blaupunkt SA 2700 Manual de usuario

IDEAL

IDEAL Accenta Manual del propietario

AJAX

AJAX DoubleButton Manual de usuario

Swann

Swann SW-P-MC2 Manual de usuario

Ecolink

Ecolink Siren+Chime Manual de usuario

Digital Monitoring Products

Digital Monitoring Products XR150 Manual de usuario

EDM

EDM Solution 6+6 Wireless-AE Manual de usuario

Highway Safety Group

Highway Safety Group EA401 Manual de usuario

Siren

Siren LED GSM Manual de usuario

Detection Systems

Detection Systems 7090i Instrucciones de montaje

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manual de usuario

Siemens

Siemens FDM273 Manual de usuario