ZyXEL Communications NSA-2400 Manual de usuario

NSA-2400

Network Storage Appliance

Quick Start Guide

Version 1.00

12/2006

Edition 2

Table of Contents

ENGLISH 1

DEUTSCH 19

FRANÇAIS 37

ITALIANO 55

SVENSKA 73

繁體中文 91

ENGLISH

Overview

The NSA-2400 (the NSA) is

a network storage device

for file sharing, data backup

and data protection in small

(home) offices and/or

medium-sized offices.

This guide shows you how

to:

1Install hard drives

2Make NSA Connections

3Access the NSA using

NDU (NSA Discovery

Utility) or your web

browser

4Set up the NSA using the wizard

5Map the NSA to a network drive from any computer

Note: See the User’s Guide for more details and specifications on the NSA.

Requirements

You need the following before you start:

•NSA

• Included CD containing the NDU (NSA Discovery Utility) and Genie Backup Manager

• Power cord and power supply (external)

• 8-wire Ethernet cable for Gigabit Ethernet

• Up to four SATA-1 or 2 (Serial Advanced Technology Attachment) compatible hard disk(s)

• Screwdriver to install the hard disks in the disk trays

• USB cable (optional: you only need this if you want to expand storage capacity by connect-

ing compatible USB 2.0 drives

• Computer with Network Interface Card (NIC) and TCP/IP installed

• Network access device such as a switch or hub.

ENGLISH

1 Install Hard Drives

Note: Hard drives are NOT hot swappable. The NSA must be turned off before you

remove or install hard drive(s).

1Pull the tab on the left of the front door of the NSA to open it.

2Pull out the latch and

grip the sides of the

tray to remove disk tray

1. Be careful not to

break the latch. Disk

bay 1 is labelled on

your NSA (the top-left

bay).

3Place the disk tray on a

flat surface with the

panel facing up. Place

a hard disk with the

screw holes facing up

on the same surface

and slide it into the disk

tray. Secure it with the

screws as shown.

4Push the top of the tray

back into NSA disk bay

1 until it snaps into

place and push the

latch up as shown.

5Repeat steps 1 to 3 for

other hard drives that

you may have.

2 Make the NSA Connections

1Connect the Ethernet port on the rear of the NSA to a

hub, switch, or router on your network using an

Ethernet cable. Use an 8-wire Ethernet cable for

Gigabit connections.

ENGLISH

2Connect one end of the power cord to the power socket

on the rear of the NSA and the other end to the external

power supply. Connect the external power supply to a

power outlet.

3Turn on the power by pressing in the power

button on the front of the NSA. Look at the front

panel lights. The PWR light turns steady green.

The SYS light turns steady green after the NSA

has booted successfully (it takes about 50

seconds). The LAN light turns on if the NSA

Ethernet port is properly connected to your

network. It blinks while transmitting or receiving

traffic.

Note: To turn off the NSA, press the power

button in once only. The SYS light blinks

red indicating the NSA is shutting down.

3 Access the NSA

You can access the NSA in one of two ways: using

the NDU (NSA Discovery Utility) or directly entering

the NSA IP address into your web browser.

3.1 Use the NDU to Discover the NSA IP Address

Use the NDU (NSA Discovery Utility) on a Windows computer if your network has a DHCP

server that will assign the NSA an IP address and/or if you have many NSAs in your

network.

Note: The Genie Backup program uses the same network port as the NDU to

discover the NSA. To avoid a port conflict, do not run the Genie Backup at the

same time as the NDU.

ENGLISH

1Insert the included CD into

your CD-ROM drive. The next

screen should automatically

display (autorun). Click the

Setup icon.

2The NDU installation wizard

begins. Follow the installer

instructions. Click Finish to

complete the installation.

3In Windows XP, click start, All

Programs, ZyXEL NSA-2400, ZyXEL NSA-

2400 Discovery Utility to run the NDU. For

other Windows operating systems,

procedures should be similar. If your

computer has more than one network card,

then you will first be prompted to select a

network interface card.

ENGLISH

4The NDU main screen

appears listing all hostnames,

IP addresses and status of all

NSAs in your network. Click

the icon under Admin to see

the main web configurator

screen as shown in section 4.

(If you want to change the

NSA IP address, click the icon

under Config. If you want to

map the NSA to a Windows

network drive, click the icon

under Map (see section 5). To

refresh the screen, click

Discover.)

3.2 Direct Access Via Web Browser

If the NSA cannot get an IP address from a DHCP server, then the default IP address of

the NSA reverts to 192.168.1.3. Before directly entering the NSA IP address into your web

browser, you must make sure that your computer and the NSA are in the same subnet.

This section shows you how to set your Windows NT/2000/XP computer to have an IP

address in the same subnet as the NSA. Refer to your User’s Guide for detailed IP address

configuration for other operating systems.

1In Windows XP, click start, Control Panel. In Windows 2000/NT, click Start, Settings,

Control Panel.

2In Windows XP, click Network Connections. In Windows 2000/NT, click Network and

Dial-up Connections.

3Right-click Local Area Connection and then click Properties.

ENGLISH

4Select Internet Protocol (TCP/IP)

(under the General tab in Win XP)

and click Properties.

5The Internet Protocol TCP/IP

Properties screen opens (the

General tab in Windows XP).

6Select Use the following IP address

and enter an IP address from

192.168.1.1 to 192.168.1.254

excluding 192.168.1.3 (the NSA) and

any other IP addresses in this range

already being used by a device on

your network.

7Click OK to close the Internet

Protocol (TCP/IP) Properties

window.

8Close the Local Area Connection

Properties window and then the

Network Connections screen.

9Launch your web browser and enter

“192.168.1.3” as the web site address.

4 NSA Wizard Setup

1Access the NSA using the NDU or web

configurator directly.

2When you first access the NSA web

configurator, you may see this screen telling

you that this is a secure connection using

HTTPS. Click OK to continue.

ENGLISH

3The web browser client uses

certificates to authenticate the

NSA. The default NSA

certificate will most likely show a

name and certification authority

mis-match; however encryption

is still performed. Click Yes to

proceed.

4When you access the NSA web

configurator, the login screen

appears. The default user name

and password are ‘admin’ and

‘1234’ respectively. Click Login.

5It is recommended that you

change the default password.

The hardware reset button

allows you to return the device

to the default IP address and the

admin password to 1234 (you

will not lose any data stored).

Click Apply to save your

changes and go to the next

screen or ignore this screen and

click Skip to go to the next

screen.

ENGLISH

6The first time you access the

NSA web configurator, you are

prompted to run the setup

wizard. Click Run Setup

Wizard.

4.1 Setup Wizard

Each time you click Next in the

wizard, your settings are saved to

the NSA. Click Back to return to a previous screen in the wizard.

1Click Next to

begin the

wizard.

2If you want to

change the

network settings of

the NSA, click

Modify Network

Settings. You can

also do this using

the NDU

(recommended). If

you change the IP

address, then you

will have to use

the new IP

address to access

the web

configurator again.

Click Next to

continue.

ENGLISH

4.1.1 Disk Setup Wizard

3This screen is the

Disk Setup

Wizard (this

screen can be

accessed

separately from

the main NSA

screen). Skip this

wizard to have

the NSA use the

current or default

volume

configuration.

• If you have

created

volumes

already, the

select

which

(existing)

ones to

modify and

click Next.

Otros manuales para NSA-2400

Este manual sirve para los siguientes modelos

Tabla de contenidos

Idiomas:

Otros manuales de Hardware de red de ZyXEL Communications

ZyXEL Communications

ZyXEL Communications ATP Series Manual de usuario

ZyXEL Communications

ZyXEL Communications ZYWALL OTPV2 - SUPPORT NOTE V1 Manual

ZyXEL Communications

ZyXEL Communications VES1724-56 Manual de usuario

ZyXEL Communications

ZyXEL Communications IES-6000 - ANNEXE 749 Manual de usuario

ZyXEL Communications

ZyXEL Communications PLX-111 Manual de usuario

ZyXEL Communications

ZyXEL Communications Prestige 1600 Manual de usuario

ZyXEL Communications

ZyXEL Communications 2-Slot 10GBase-CX4 10Gigabit Module EM-412 Manual de usuario

ZyXEL Communications

ZyXEL Communications P-660HW-D1 Manual de usuario

ZyXEL Communications

ZyXEL Communications WAP6804 Manual de usuario

ZyXEL Communications

ZyXEL Communications Prestige 2602R Series Manual de usuario

ZyXEL Communications

ZyXEL Communications ZyWall Manual de usuario

ZyXEL Communications

ZyXEL Communications VMG4005-B60A Manual de usuario

ZyXEL Communications

ZyXEL Communications IES-612-51A Manual de usuario

ZyXEL Communications

ZyXEL Communications FMG3010-R20A Manual de usuario

ZyXEL Communications

ZyXEL Communications ZYAIR Manual de usuario

ZyXEL Communications

ZyXEL Communications PLA450 Series Manual de usuario

ZyXEL Communications

ZyXEL Communications P-2602HWNLI Manual de usuario

ZyXEL Communications

ZyXEL Communications PK5000Z Manual de usuario

ZyXEL Communications

ZyXEL Communications G-4100 v2 Manual del operador

ZyXEL Communications

ZyXEL Communications NSA325 Manual de usuario

ZyXEL Communications

ZyXEL Communications VPN Series Manual de usuario

ZyXEL Communications

ZyXEL Communications ZyWALL SSL 10 Manual de usuario

ZyXEL Communications

ZyXEL Communications IES-22A - Manual de usuario

ZyXEL Communications

ZyXEL Communications OLT2406 Manual de usuario

Manuales populares de Hardware de red de otras marcas

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manual de usuario

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manual de usuario

Yudor

Yudor YDS-16 Manual de usuario

D-Link

D-Link ShareCenter DNS-320L Manual de usuario

Samsung

Samsung ES1642dc Instrucciones de uso

Honeywell Home

Honeywell Home LTEM-PV Instrucciones de montaje

evertz

evertz 7700 Series Manual de usuario

D-Link

D-Link ShareCenter DNS-343 Manual de usuario

Asante

Asante AsanteBridge 1012 Manual de usuario

FireBrick

FireBrick FB2700 Manual de usuario

Audiovox Electronics

Audiovox Electronics ARWH2T Manual de usuario

ADC

ADC DSX-1 Manual

NetComm

NetComm NF2 Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 5620 Manual de usuario

Dell EMC

Dell EMC XC6420 Series Manual de usuario

Lanner

Lanner NCA-1020A Manual de usuario

Allied Telesis

Allied Telesis AT-TN121-A Manual de usuario

Arista

Arista CCA-ETM-Q12 Manual de usuario