Zte Z6530V Manual de usuario
1
Z6530V
User Guide
2
LEGAL INFORMATION
Copyright © 2019 ZTE CORPORATION.
All rights reserved.
No part of this publication may be quoted,
reproduced, translated or used in any form or by
any means, electronic or mechanical, including
photocopying and microfilm, without the prior
written permission of ZTE Corporation.
Notice
ZTE Corporation reserves the right to make
modifications on print errors or update
specifications in this guide without prior notice.
We offer self-service for our smart terminal device
users. Please visit the ZTE official website (at
www.ztedevices.com) for more information on
self-service and supported product models.
Information on the website takes precedence.
Disclaimer
ZTE Corporation expressly disclaims any liability
for faults and damages caused by unauthorized
modifications of the software.
Images and screenshots used in this guide may
differ from the actual product. Content in this guide
may differ from the actual product or software.
Trademarks
ZTE and the ZTE logos are trademarks of ZTE
Corporation.
Android™ is a trademark of Google LLC.
The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth SIG, Inc. and
any use of such marks by ZTE Corporation is under
license.
microSDXC Logo is a trademark of
SD-3C, LLC.
3
For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS Licensing
Limited. DTS, the Symbol, & DTS and the Symbol
together are registered trademarks or trademarks
of DTS, Inc. in the United States and/or other
countries. © DTS, Inc. All Rights Reserved.
Other trademarks and trade names are those of
their respective owners.
Version No.: R1.0
Edition Time : June 5, 2019
4
Getting to Know Your Phone
Front camera
Touch screen
Earpiece
Proximity &
light sensor
Fingerprint
sensor
nano-SIM/
microSDXC
card tray
Flash
Charging/USB
Type-C jack
Headset jack
Main
microphone
Speaker
Indicator light
Volume key
Auxiliary
microphone
Power key
Dual-
lens
back camera
5
Installing the nano-SIM Card and
the microSDXC™ Card (Optional)
The nano-SIM card can be installed or removed
while the phone is turned on.
WARNING!
To avoid damage to the phone, do not use any
other kind of SIM cards, or any non-standard
nano-SIM card cut from a SIM/micro-SIM card. You
can get a standard nano-SIM card from your
service provider.
1. Insert the tip of the tray eject tool into the hole
next to the card tray.
6
2. Pull out the card tray and place the nano-SIM
card and the microSDXC card on the tray, as
shown. Carefully slide the tray back into place.
Charging the Phone
Your phone’s battery should have enough power for
the phone to turn on, find a signal, and make a few
calls. You should fully charge the battery as soon
as possible.
WARNING!
Use only ZTE-approved chargers and USB Type-C
cables. The use of unapproved accessories could
damage your phone or cause the battery to explode.
NOTE:
Use the charger that comes in-box with your phone
to charge the battery.
WARNING!
Do not remove the back cover. The battery is
not removable. Removal may cause fire or
explosion.
7
NOTE:
If the battery is extremely low, you may be unable
to power on the phone even when it is being
charged. In this case, try again after charging the
phone for at least 20 minutes. Contact the
customer service if you still cannot power on the
phone after prolonged charging.
NOTE:
If the screen freezes or takes too long to respond,
try pressing and holding the Power key for about
10 seconds to restart the phone.
8
Product Safety Information
Don’t make or receive phone calls while
driving. Never text while driving.
Keep your phone at least 10 mm away
from your body while making calls.
Small parts may cause choking.
Your phone can produce a loud sound.
To prevent possible hearing damage, do
not listen at high volume levels for long
periods. Exercise caution when holding
your phone near your ear while the
loudspeaker is in use.
Avoid contact with anything magnetic.
Keep away from pacemakers and other
electronic medical devices.
Turn off when asked to in hospitals and
medical facilities.
Turn off when told to on aircraft and at
airports.
Turn off when near explosive materials
or liquids.
Don’t use at gas stations.
Your phone may produce a bright or
flashing light.
Don’t dispose of your phone in fire.
Avoid extreme temperatures.
9
Avoid contact with liquids. Keep your
phone dry.
Do not attempt to disassemble your
phone.
Only use approved accessories.
Don’t rely on your phone as a primary
device for emergency communications.
Radio Frequency (RF) Energy
This phone is designed and manufactured not to
exceed the emission limits for exposure to radio
frequency (RF) energy set by the Federal
Communications Commission of the United States.
During SAR testing, this device was set to transmit
at its highest certified power level in all tested
frequency bands, and placed in positions that
simulate RF exposure in usage against the head
with no separation, and near the body with the
separation of 0.4 inches (10 mm). Although the
SAR is determined at the highest certified power
level, the actual SAR level of the device while
operating can be well below the maximum value.
This is because the phone is designed to operate at
multiple power levels so as to use only the power
required to reach the network. In general, the closer
you are to a wireless base station antenna, the
lower the power output.
The exposure standard for wireless devices
employing a unit of measurement is known as the
10
Specific Absorption Rate, or SAR. The SAR limit
set by the FCC is 1.6 W/kg.
This device is complied with SAR for general
population/uncontrolled exposure limits in
ANSI/IEEE C95.1-1992 and had been tested in
accordance with the measurement methods and
procedures specified in IEEE1528.
The FCC has granted an Equipment Authorization
for this model phone with all reported SAR levels
evaluated as in compliance with the FCC RF
exposure guidelines. SAR information on this
model phone is on file with the FCC and can be
found under the Display Grant section of
www.fcc.gov/oet/ea/fccid after searching on FCC
ID: SRQ-Z6530V.
For this device, the highest reported SAR value for
usage against the head is 1.19 W/kg, and for
usage near the body is 0.66 W/kg.
While there may be differences between the SAR
levels of various phones and at various positions,
they all meet the government requirements.
SAR compliance for body-worn operation is based
on a separation distance of 0.4 inches (10 mm)
between the unit and the human body. Carry this
device at least 0.4 inches (10 mm) away from your
body to ensure RF exposure level compliant or
lower to the reported level. To support body-worn
operation, choose the belt clips or holsters, which
do not contain metallic components, to maintain a
separation of 0.4 inches (10 mm) between this
Tabla de contenidos
Otros manuales de Teléfono móvil de Zte
Zte
Zte Blade A3 2019 Manual de usuario
Zte
Zte ZTE-G R352 Manual de usuario
Zte
Zte Blade S7 Manual de usuario
Zte
Zte A39 Manual de usuario
Zte
Zte Grand X Manual de usuario
Zte
Zte Midnight Z768G Manual de usuario
Zte
Zte Blade V40 Design Manual de usuario
Zte
Zte AXON 10 PRO Manual de usuario
Zte
Zte BOOST B795 Manual de usuario
Zte
Zte BLADE A310 Manual de usuario
Zte
Zte Z986DL Manual de usuario
Zte
Zte T-Mobile Aspect Manual de usuario
Zte
Zte BLADE A522 Manual de usuario
Zte
Zte Leopard MF900 Manual de usuario
Zte
Zte Star 1 Manual de usuario
Zte
Zte E821 Manual de usuario
Zte
Zte Happy Phone C310 Manual de usuario
Zte
Zte AT&T Z432 Manual de usuario
Zte
Zte Blade A52 Manual de usuario
Zte
Zte S160 Manual de usuario
