Zte V6000 Manual de usuario
-0-
ZTE V6000
User Manual
-1-
Using your phone
Thanks for choosing the ZTE V6000. It’s a WCDMA digital mobile
phone, which we’ll simply call ‘phone’ from now on.Under Android
operating system, the mobile phone supports 3G high-speed
Internet access, which brings you brandnew experiences.
And don’t worry if the pictures we use to demonstrate your phone’s
functions look a little different from what you see on its screen. It’s
the functions they show that matter.
This quick start guide is designed to help you familiarise yourself
with the mobile phone’s basic functions. For details, please refer to
the User Manual.
-2-
Starting Up
How to insert the SIM card
Insert the SIM card as follows:
1. Switch off your phone and disconnect any
external power.
2. Remove the back cover and then the battery.
3. Hold your SIM on the cut corner, and slide it
face down into the card holder.
4. Insert the battery.
5. Replace the back cover.
Inserting and removing a memory card
Note: Removing or inserting a memory card when your phone is
turned on could not only damage it and your phone, but also
destroy any data saved on the card.
1. Remove the back cover and insert the
memory card at the side of the phone.
2. Push tightly until the card is installed in the
right position and replace the back cover.
3. Before you take out the card, please open
the back cover and press the card inward
to unlock.
-3-
Battery
The lithium ion battery of the mobile phone can be immediately
used after unpacking. A new battery performs best after perfoming
a full charge/discharge 3 times.
Installing the battery
1. Open the battery cover on the back of your phone.
2. Align the battery's contact points with those of the phone and
gently press the battery down into place.
3. Replace the battery cover clicking it back into position.
Removing the battery
1. Switch off your phone.
2. Open the battery cover.
3. Lift the battery up and out of your phone.
-4-
How to charge the battery
The rechargeable Li-ion battery that comes with
your phone is ready to use, but is not charged.
That’s easy to do. We’ll show you how below.
1. Connect the charger to your phone, and plug
it into an 110V/220V socket.
2. The battery indicator in the corner of the screen will scroll to
show you it’s charging.
3. When fully charged, the battery indicator will stop scrolling.
Disconnect the charger from your mobile, and unplug.
Powering On/Off
Powering On
Press the End/Power key until the power-on icon appears.
Note:You may need to enter the Personal Identification Number
(PIN) or Draw unlock pattern if you have set a PIN or unlock
pattern.
Powering Off
Long press the End/Power key to display the menu Phone options
and select Power off.
-5-
My Phone
End/power ke
y
Back key
Home ke
y
Menu key
OK key
Side key
s
Fn ke
y
SYM key
Delete key
Receiver
Camera
Speaker
USB interface Headset jack
End/power ke
y
Press the key to turn
on/off the display, and
hold the key to turn
on/off the phone.
Side keys
A
djust the
volume
-6-
Idle screen
When you turn on the phone, it enters the idle screen. The
following indicators notify you with the phone status and alerts.
Icons Descriptions Icons Descriptions
Signal strength No signal
Battery is full In charging
Battery is low In call
3G connected GPRS connected
Edge connected You have unread
message.
Speakerphone is on You have unheard voice
mail.
Call forwarding is on You have unread email.
Call on hold Connected to a PC
Vibrate mode Music playing
Ringer is silenced New calendar reminder
Flight mode A clock alarm is active.
Missed call WLAN function on
Bluetooth is on Receiving location data
from GPS
-7-
Text Input
Using the keypad
As the slide is opened, you could use the keypad to input.
Switch input method: Press the key.
Insert a space: Press the key.
Delete: Press the key to delete the input before the
cursor.
Switch caps lock: Press the key.
Line feed: Press the key.
Input letters and common symbols: There are two symbols
on the keys. In abc/Abc/ABC method, press the key to input
the symbol located on the left part of the key; press the
key and then press the key to input the symbol located on the
right part of the key; press the key twice and then press
the key to continuously input the symbol located on the right
part of the key.
In Smart abc/Abc/ABC method, your phone predicts the word
as you enter it, so you need input only the first few letters of
the word.
Input numbers: In 123 method, press the numeric keys to
input the corresponding numbers.
Input symbols: During the text input, press key to display
symbol lists, press the Navigation keys to select the symbol,
and press OK to confirm.
-8-
Using Virtual keyboard
Your phone supports the Android keyboard input method and the
TouchPal keyboard input method. Android keyboard supports
multiple language inputs; TouchPal keyboard supports English
and Spanish.
On the text screen, touch and hold the space where you usually
write your text until the Input method is displayed,and touch it
and select the input options.
Android Keyboard
XT9 Text Input
XT9 Text Input can speed up text input by replacing the key
tapping motion of input with a tracing gesture where you move
your finger from letter to letter without lifting the finger until you
reach the end of the word.
Delete a
character before
Insert a smiley.
Change between lowercase
and uppercase.
Change to symbol/number
mode. Tap again to change
Select input method Insert space
-9-
Basic Operation
Make and answer calls
Make a call
Directly make a call
On the home screen, press the numeric keys to input the
telephone numberand press the button to make a call.
Making a call from Contacts
In the Launcher, press the Contacts icon to display the list of
contacts, select the desired contact and press button to
make a call.
Making a call from Calls
In the Launcher, press Contacts >Calls to select the desired
call log and press button to make a call.
Make an international call
Long press “0” key until “+” appears on the screen, and then
dial the country code or region code, city code and phone
number.
Dial from Messaging
1. In the Launcher, press the Messaging icon to open the
message interface.
2. Select and open one message or conversation.
3. Long press the message text to pop up the Message
Tabla de contenidos
Otros manuales de Teléfono móvil de Zte
Zte
Zte TALK Manual de usuario
Zte
Zte Blade V6 Manual de usuario
Zte
Zte Blade A3 Prime Manual de usuario
Zte
Zte ZTE Warp Manual de usuario
Zte
Zte Axon 7 Manual de usuario
Zte
Zte Warp Sequent Manual de usuario
Zte
Zte Render Manual de usuario
Zte
Zte N6204 Manual de usuario
Zte
Zte A110 Manual de usuario
Zte
Zte Z959 Manual de usuario
Zte
Zte SKINNY F328 Manual de usuario
Zte
Zte ZTE8045 Manual de usuario
Zte
Zte X175 Manual de usuario
Zte
Zte Blade S6 Manual de usuario
Zte
Zte Z233 Manual de usuario
Zte
Zte Grand X Manual de usuario
Zte
Zte C70 Manual de usuario
Zte
Zte V765M Manual de usuario
Zte
Zte C78 Manual de usuario
Zte
Zte S165 Manual de usuario
