Zte R226-Z Manual de usuario
1
R226-Z
Quick Start Guide
ZTE CORPORATION
NO. 55, Hi-tech Road South, Shenzhen, P.R.China
Postcode: 518057
2
Getting to Know Your Device
Appearance
The following figure is for your reference only.
1. Power key
2. FUNC key
3. External antenna connector
4. LCD screen
5. micro-SIM card slot cover and reset hole
6. Charging/micro-USB jack
7. External antenna connector
3
Getting to Know Your Device
Indicators
When the device is powered on, the following icons may be
displayed on the LCD screen. For a description of the icons,
refer to the following table.
Icon
Description
Network signal strength
/ /
Network type
The user is in roaming status.
Connected to the Internet.
Connected to the Internet in the Internet Wi-Fi
mode.
New message (s)
Wi-Fi status and the number of connected users
Battery level
4
Getting to Know Your Device
Connection Scenarios
The device can access the Internet in two ways and it allows
multiple clients to surf on the Internet at the same time. The
following figures are for your reference only.
4G Mode: A micro-SIM card can be used to access the
Internet.
Internet Wi-Fi Mode: Your device can be connected to a
WLAN device (such as a hotspot device or wireless router)
through Wi-Fi to access the Internet. The WLAN device must
be already connected to the Internet.
NOTE:
Your device and the WLAN device must be in different subnets.
5
Installing the micro-SIM Card
1. Open the micro-SIM card slot cover, and install a micro-SIM
card to the micro-SIM card slot.
NOTE:
Do not remove the cover rudely, because it is connected with the
device.
WARNING!
To avoid damage to the device, do not use any other kind of SIM
cards, or any non-standard micro-SIM card cut from a SIM card.
You can get a standard micro-SIM card from your service
provider.
6
2. Close the micro-SIM card slot cover.
Connecting to Your Device
Using Wi-Fi
1. Power on your device.
2. Ensure that your computer or other client devices have
enabled Wi-Fi, and search for available wireless networks.
NOTE:
Refer to your Wi-Fi-enabled client device manual for further
details on how to search for wireless networks. If you use a
computer, you need to set your computer to obtain an IP
address automatically.
3. Select the Wi-Fi name (SSID) of your device, and click
Connect.
4. Enter the Wi-Fi password if necessary, and click OK.
NOTE:
Refer to the chapter Getting to Know the Wi-Fi SSID and
Password to get the default Wi-Fi SSID and password.
Connecting to Your Device
5. Wait until the client device is connected to your device
successfully.
Using a USB Cable
1. Connect a computer to your device with a USB cable.
7
2. Power on your device. The operating system detects and
identifies new hardware, and automatically installs the
hardware.
NOTE:
If the system does not automatically launch installation, you can
Double-click the device installation icon in My Computer to
install the software.
3. Wait until the computer is connected to your device
successfully.
Getting to Know the Wi-Fi SSID and
Password
You can use the following methods to get the default Wi-Fi SSID
and password.
View the label on the device.
Press the FUNC Key to access the options menu.
Select Device Info and the Wi-Fi SSID and password
are displayed on the screen.
8
Logging in to the 4G Mobile
Hotspot Configuration Page
1. Ensure that the connection between your device and the
client device is correct.
2. Launch the Internet browser and enter http://192.168.0.1 or
http://ufi.ztedevice.com in the address bar.
3. Enter the password to log in to the 4G Mobile Hotspot
configuration page.
NOTE:The default password is admin.
Changing the Wi-Fi SSID or
Password
1. Log in to the 4G Mobile Hotspot configuration page.
2. Select Settings below Wi-Fi and then click Main SSID.
3. Change the Network Name (SSID) or the Password in the
Main SSID area.
4. Click Apply.
9
Accessing the Internet
4G Mode
After a client device is successfully connected to your device,
you can access the Internet in Automatic or Manual mode. The
default mode is Automatic.
Mode
Operation
Automatic
Your device is automatically connected to the
Internet, and you can surf on the Internet
through the client.
Manual
1. Log in to the 4G Mobile Hotspot
configuration page.
2. Select Settings > Connection Mode >
Manual, and then click Apply.
3. Click to back to the home page, and
click or .
You can also press the FUNC Key and
select Network Connection. Select Yes
or No.
NOTE:
To modify the parameters of your device, log in to the 4G Mobile
Hotspot configuration page.
10
Internet Wi-Fi Mode
1. Log in to the 4G Mobile Hotspot configuration page.
2. Select Wi-Fi Settings > Internet Wi-Fi.
3. Set the Internet Wi-Fi Switch as Enable and then click
Apply.
4. Set the Preferred Network as Wi-Fi and then click Apply.
5. Connect to the Wi-Fi hotspot.
The following two methods are for your reference.
Select a Wi-Fi hotspot listed in the Wi-Fi Hotspot area and
click Connect. Enter a pass phrase in the Pass Phrase
text box and click OK.
Click Add Network, enter the Wi-Fi hotspot information in
the Add Wi-Fi Hotspot area, and click Apply. Click the
Wi-Fi hotspot you have added and then click Connect.
Tabla de contenidos
Otros manuales de Teléfono móvil de Zte
Zte
Zte S183 Manual de usuario
Zte
Zte N285 Manual de usuario
Zte
Zte grand era v9800 Manual de usuario
Zte
Zte Telstra T100 Manual de usuario
Zte
Zte SKINNY F328 Manual de usuario
Zte
Zte REDMAGIC 8 Pro Manual de usuario
Zte
Zte Avid 579 Manual de usuario
Zte
Zte Blade A51 Manual de usuario
Zte
Zte ZTE-G R352 Manual de usuario
Zte
Zte Blade_G_Lux Instrucciones de funcionamiento y mantenimiento
Zte
Zte 302ZT Manual de usuario
Zte
Zte BLADE L9 Manual de usuario
Zte
Zte Blade L2 Manual de usuario
Zte
Zte S551 Manual de usuario
Zte
Zte Blade A511 Manual de usuario
Zte
Zte GRAND S FLEX Manual de usuario
Zte
Zte V70 Manual de usuario
Zte
Zte F102 Manual de usuario
Zte
Zte FNB ConeXis X1 Manual de usuario
Zte
Zte Blade V40 Vita Manual de usuario
