Zte Blade V2 (A476) Manual de usuario
1
ZTE Blade V2 (A476) Quick Start Guide
ZTE Australia is on Facebook , Google+, Twitter and Instagram
Copyright © 2015 by ZTE Corporation. AU Ver 1.0 Oct. 2015
Front camera
Display
Options key
Home key
Back key
Back camera
Volume keys
Flashlight
Power key
Microphone
Card tray
Headset jack
Noise-reduction MIC
Speaker
Earpiece
USB port
2
Insert 1 SIM card or 2 SIM cards
Insert 1 or 2 valid nano-SIM cards into your phone before use.
1. Insert the ejector pin into the hole on the SIM tray. Firmly
press the pin until the tray pops out.
2. Put the nano-SIM card into the tray.
3. Insert the SIM tray back into the phone.
Important Notes:
1. Two SIM cards cannot support 3G network at the same
time. When one SIM card supports 3G network, the other
SIM card supports GSM network only.
2. Only one card supports data service. When one card is used
for data service, the other card cannot be used for data.
A nano-SIM card is a small SIM card. Do not use a micro-SIM or
SIM card adaptor which may damage your device.
Insert the memory card
Insert the memory card into the card slot as shown.
3
Key Functions
Keys
Function
Power Key
Hold down to power on your phone.
Press to switch to sleep mode. Press to wake up.
Hold down for Silent mode, Airplane mode or
Power off.
Back
Press to go to the previous screen.
Press to exit applications.
Home
Press to return to the Home Screen from any
screen. Hold down to access Google Now
Options
Get options on the current screen.
Hold down to see the recently used applications.
Volume
Keys
Use to control the volume Up and Down, Vibrate
and Silent mode, Media and Earpiece Volumes.
Phone icon –Open the dialler for Calls
Contacts –Access your Phonebook Contacts
Messages –Messages app, for SMS and MMS
Apps –Open the Applications menu
Switch your device On or Off
Press and hold the Power Key to turn on your phone.
If your screen is locked, slide the padlock icon to unlock the
device.
To turn it off, press and hold the Power Key to open the
options menu.
Touch Power off and then touch OK.
4
Charge your Battery
Insert the charger lead carefully.
Ensure the plug is inserted with the correct orientation.
Do not force the connector into the charger jack.
Disconnect the charger when fully charged.
When the phone is on the charging icon / is shown on
the status bar.
How much charge have you got?
If the battery is low, there will be a pop-up message on the
screen. During charging the charge level is shown on the lock
screen.
TIP: You can also show the charge level on the top bar. Go to
Settings > Battery and check the Percentage box.
Volume Controls
From the Home screen, the volume keys control the Ring
volume, Vibrate and Silent. From within a game or media app
the volume keys control the media volume. If you are on a Call
the volume keys control the in call (earpeice) volume.
Setting Up for the First Time
When you first power on your phone or after a factory reset you
need to enter some settings before use.
1. Touch the Arrow to begin and step through the wizard
selecting your personal preferences. Note that selecting
Backup and Restore options will consume data.
2. Further assistance is given in the form of pop ups
describing how to use various features. Press OK to clear
these notices.
5
Connect to a Wi-Fi Network
Use a local Wi-Fi network to download data instead of using
your network data.
Go to Settings > Wi-Fi, switch On and then touch a network to
join.
If the network is secured you need to know the password.
Wi-Fi passwords are case sensitive so enter exactly as it is
written.
The Home Screen
Settings
Touch the Settings icon on the home screen
Screen Locks
You can secure your handset with a variety of different screen
locks. Go to Settings > Security > Screen Lock to set a Pattern,
PIN or Password to lock your front screen.
Change your Ringtone and other Audio Settings
Press Settings > Sound & notification > > Phone Ringtone,
Default Notification sound, Vibrate mode etc.
Drag the
notifications bar
down to review
Phone Contacts Apps Messages Browser
6
Phone Status Icons
G
GPRS network
No Signal
E
EDGE network
Signal strength (no data)
3G
3G network
Signal strength (data
ready)
H
HSDPA network
Mobile data in use
Flight mode
Ringer off
Emergency calls only
Microphone off (muted)
Battery flat
Vibrate on
Battery low
Speaker on
Battery partially
drained
Connected to Wi-Fi
network
Battery full
Wi-Fi data in use
Battery charging
Headset connected
Bluetooth on
Access the Quick Settings Panel
Swipe down from the top of the screen and touch the Quick
Setting icon. Tap to enable or disable the features.
7
Notification Icons
New SMS
microSD card not mounted
New MMS
microSD card removed
New Email
Upcoming event
New Gmail message
Call on hold
New Hangouts
message
New Wi-Fi network detected
SMS or MMS issue
Downloading data
Missed call
Uploading data
Call in progress
USB tethering is on
USB connected
Wi-Fi hotspot is on
Song is playing
Bluetooth is on
Updates available
Making Calls
1. Touch Home Key > > Touch to open the Dial
pad.
2. Enter the phone number using the dial pad. Touch to
delete wrong digits.
3. Press Options to add a Pause or Wait if required
4. Press and hold the 0 key to enter the plus (+) symbol for
international dialling.
5. Touch the Phone icon below the keypad to dial.
8
Options during a call
Press to open the number pad
Press to use loudspeaker (Handsfree) mode
Press to mute the microphone
Press to put the current call on hold
Press to End the call
When you receive a phone call
The display shows the caller ID and any additional information
about the caller saved in Contacts.
Press to answer the call.
Press to reject the call.
Set this at Dialler > Options > Settings > General > Quick
responses.
TIP: You can silence the incoming ring by pressing either of the
Volume keys.
Messaging
Use Messaging to exchange text messages (SMS) and
multimedia messages (MMS).
Open the Messaging Screen
Touch in the Home Screen or from Apps
The Messaging screen opens, where you can create a new
message, search for messages, or open an ongoing message
thread.
1. Touch to write a new message.
2. Touch to search within messages
3. Touch an existing message to open the thread.
Send a Text Message
On the Messaging screen, touch to create a new
message.
9
Enter the recipient’s number or, if the recipient is stored in
Contacts the first letters of their name. As matching contacts
appear, you can touch a suggested recipient.
Touch the Type text message field, and enter your message
using the keypad. Touch to Send.
Reply to a Message
Messages you receive are appended to existing threads of the
same number. A new thread is created for new numbers.
1. On the Messaging screen, touch the thread that has the
message you want to reply to.
2. Type your reply in the text box at the bottom. You can
touch the attach icon +if you want to reply with an MMS.
3. Touch to Send.
View Message Details
1. Touch and hold a message in a thread.
2. Touch View message details to see the message type,
sender or receiver, time and date .
Send a Multimedia Message
On the Messaging screen, touch at the bottom to create
a new message.
Enter the recipient and the text of the message, as you do when
sending a text message.
Touch the icon to add an attachment
Touch to Send.
TIPS: The default MMS size is 300KB, you can change this at
MMS Settings. Large images are automatically re-sized but
video files may be too large to send. Send large Video files by
email instead or share using Social Media.
Forward a Message
In Messaging touch the thread to open the SMS.
1. Touch and hold the message.
2. Touch Forward in the menu that opens.
3. Enter a recipient for the message and edit the content if
you want.
4. Touch to Send.
10
Delete messages:
1. On the Messaging screen, touch a thread.
2. Touch > Select item(s).
3. Touch the messages you want to delete.
4. Touch at the bottom.
5. Touch Delete.
Delete message threads:
1. On the Messaging screen, touch and hold the thread to
delete.
2. If there are more threads you want to delete, touch them
one by one.
3. Touch at the bottom.
4. Touch Delete.
Message Settings
Touch > Settings in the Messaging screen to change
Messaging settings.
Enable Group MMS
Go to Message Settings (see above) > Multimedia and check
Group messaging. All multi party SMS will be converted to MMS.
Recipients can use Reply All to reply to the whole group.
MMS requires the sender and receiver to have an active data
account. Users without data will not receive the MMS.
Transfer files to a Computer
Connecting to a computer enables you to transfer music,
pictures and other files to and from your handset. There are
various ways to do this.
1. Connect using a USB lead. First time select ‘Built in CDROM’
to install the handset drivers. Subsequently select MTP on the
handset to browse the handset folders on your PC.
2. Use Google Drive to share files in the cloud
3. Connect via Bluetooth to share files with other devices.
MAC users need to download the File Transfer app from
Android onto your MAC device.
More Help
Get online support at ztemobiles.com.au or connect with us via
social media; search ZTE Australia on Facebook or Twitter.
Tabla de contenidos
Otros manuales de Teléfono móvil de Zte
Zte
Zte V795 Manual de usuario
Zte
Zte Prelude Manual de usuario
Zte
Zte F160 Manual de usuario
Zte
Zte F159 Manual de usuario
Zte
Zte Roamer Manual de usuario
Zte
Zte BLADE A610 Manual de usuario
Zte
Zte ZMAX Manual de usuario
Zte
Zte BLADE A3 Manual de usuario
Zte
Zte Vital Manual de usuario
Zte
Zte ZTE-C X768 Manual de usuario
Zte
Zte Director Manual de usuario
Zte
Zte Telstra F327S Manual de usuario
Zte
Zte Blade V6 Manual de usuario
Zte
Zte BLADE L9 Manual de usuario
Zte
Zte A465 Manual de usuario
Zte
Zte Blade A3 2019 Manual de usuario
Zte
Zte blade V8 PRO Manual de usuario
Zte
Zte Z998 Manual de usuario
Zte
Zte Director Manual de instalación
Zte
Zte Blade L5 Plus Manual de usuario
