Zte Blade L210 Manual de usuario

ZTE Blade L210

Quick Start Guide

LEGAL INFORMATION

No part of this publication may be quoted, reproduced,

translated or used in any form or by any means,

electronic or mechanical, including photocopying and

microfilm, without the prior written permission of ZTE

Corporation.

Notice

ZTE Corporation reserves the right to make modifications

on print errors or update specifications in this guide

without prior notice.

We offer self-service for our smart terminal device users.

Please visit the ZTE official website (at

www.ztedevices.mx) for more information on self-service

and supported product models. Information on the

website takes precedence.

Visit https://ztedevices.mx/soporte/ to download the

user manual. Just click Support from the home page and

then select the location, product type, and name to

search for related support information.

Disclaimer

ZTE Corporation expressly disclaims any liability for

faults and damages caused by unauthorized

modifications of the software.

Images and screenshots used in this guide may differ

from the actual product. Content in this guide may differ

from the actual product or software.

Trademarks

ZTE and the ZTE logos are trademarks of ZTE

Corporation.

Android™ is a trademark of Google LLC.

The Bluetooth® word mark and logos are registered

trademarks owned by the Bluetooth SIG, Inc. and any

use of such marks by ZTE Corporation is under license.

microSDXC Logo is a trademark of SD-3C, LLC.

Other trademarks and trade names are those of their

respective owners.

Version No.: R1.0

Edition Time : May 6, 2020

Manual No.: 079584xxxxxx

Getting to Know Your Phone

Front camera

Touch screen

Earpiece

Volume ke

Power key

Flash

Headset jack

Back camera

Indicator light

Fingerprint

sensor

Charging/micro

-USB jack

Setting Up Your Phone

The nano-SIM card can be installed or removed while the

phone is turned on.

Power off your phone before removing or replacing the

battery.

WARNING!

To avoid damage to the phone, do not use any other kind

of SIM cards, or any non-standard nano-SIM card cut

from a SIM card. You can get a standard nano-SIM card

from your service provider.

1. Place your finger into the slot at the bottom of the

back cover, and gently lift and remove the cover.

2. Install the nano-SIM card and the microSDXC card

(optional) as shown.

3. Insert the battery,making sure the connectors

align.Gently push down on the battery until it clicks

into place.

4. Replace the back cover.

Charging the Phone

Your phone’s battery should have enough power for the

phone to turn on, find a signal, and make a few calls. You

should fully charge the battery as soon as possible.

WARNING!

Use only ZTE-approved chargers and USB cables. The

use of unapproved accessories could damage your phone

or cause the battery to explode.

1. Connect the adapter to the charging jack. Ensure that

the adapter is inserted in the correct direction.

2. Connect the charger to a standard AC power outlet.

3. Disconnect the charger when the battery is fully

charged.

NOTE:

If the battery is extremely low, you may be unable to

power on the phone even when it is being charged. In this

case, try again after charging the phone for at least 20

minutes. Contact the customer service if you still cannot

power on the phone after prolonged charging.

Powering On/Off Your Phone

Make sure the battery is charged before powering on.



Press and hold the Power key to turn on your phone.



To power off, press and hold the Power key to open

the options menu, and touch >.

NOTE:

If the screen freezes or takes too long to respond,

reinstall the battery and power on again.

FM Radio

Scanning for Channels

1. Plug in a wired headset, open the app list and touch

FM Radio.

Touch > Scan > OK to scan for all available

channels and save them to the All channels list.

NOTE:

When you open the FM Radio app for the first time, it will

automatically scan for channels and show the All

channels list. You can also touch > All channels to

view the list.

Listening to FM Radio

1. Open FM Radio while the headset is connected.

2. Touch > All channels and select a channel.

You can also drag the red line along the frequency panel

or touch or to switch to other channels, or touch

or to adjust the current channel frequency.

NOTES:

Touch to add the channel to favourites.

Touch to listen to the radio through the phone

speaker.

The FM radio feature does not require an Internet

connection.

Product Safety Information

Don’t make or receive phone calls while driving.

Never text while driving.

Keep your phone at least 10 mm away from

your body while making calls.

Small parts may cause choking.

Your phone can produce a loud sound.

To prevent possible hearing damage, do not

listen at high volume levels for long periods.

Exercise caution when holding your phone near

your ear while the loudspeaker is in use.

Avoid contact with anything magnetic.

Keep away from pacemakers and other

electronic medical devices.

Turn off when asked to in hospitals and medical

facilities.

Turn off when told to on aircraft and at airports.

Turn off when near explosive materials or

liquids.

Don’t use at gas stations.

Your phone may produce a bright or flashing

light.

Don’t dispose of your phone in fire.

Avoid extreme temperatures.

Avoid contact with liquids. Keep your phone

dry.

Do not attempt to disassemble your phone.

Only use approved accessories.

Don’t rely on your phone as a primary device

for emergency communications.

FCC RF Exposure Information (SAR)

This phone is designed and manufactured not to exceed

the emission limits for exposure to radio frequency (RF)

energy set by the Federal Communications Commission

of the United States.

During SAR testing, this device was set to transmit at its

highest certified power level in all tested frequency bands,

and placed in positions that simulate RF exposure in

usage against the head with no separation, and near the

body with the separation of 10 mm. Although the SAR is

determined at the highest certified power level, the actual

SAR level of the device while operating can be well below

the maximum value. This is because the phone is

designed to operate at multiple power levels so as to use

only the power required to reach the network. In general,

the closer you are to a wireless base station antenna, the

lower the power output.

The exposure standard for wireless devices employing a

unit of measurement is known as the Specific Absorption

Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg.

This device is complied with SAR for general

population/uncontrolled exposure limits in ANSI/IEEE

C95.1-1992 and had been tested in accordance with the

measurement methods and procedures specified in

IEEE1528.

The FCC has granted an Equipment Authorization for this

model phone with all reported SAR levels evaluated as in

compliance with the FCC RF exposure guidelines. SAR

information on this model phone is on file with the FCC

and can be found under the Display Grant section of

www.fcc.gov/oet/ea/fccid after searching on FCC ID:

SRQ-ZTEL210. The FCC ID also can be found on the

device when you open the app list and touch Settings >

About phone > FCC ID.

For this device, the highest reported SAR value for usage

against the head is 1.109 W/kg, and for usage near the

body is 0.992 W/kg.

While there may be differences between the SAR levels

of various phones and at various positions, they all meet

the government requirements.

SAR compliance for body-worn operation is based on a

separation distance of 10 mm between the unit and the

human body. Carry this device at least 10 mm away from

your body to ensure RF exposure level compliant or

lower to the reported level. To support body-worn

operation, choose the belt clips or holsters, which do not

contain metallic components, to maintain a separation of

10 mm between this device and your body.

RF exposure compliance with any body-worn accessory,

which contains metal, was not tested and certified, and

using such body-worn accessory should be avoided.

§ 15.19 Labeling requirements.

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and (2)

this device must accept any interference received,

including interference that may cause undesired

operation.

§ 15.21 Information to user.

Any Changes or modifications not expressly approved by

the party responsible for compliance could void the user's

authority to operate the equipment.

§ 15.105 Information to the user.

Note: This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against

harmful interference in a residential installation. This

equipment generates uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is

no guarantee that interference will not occur in a

particular installation. If this equipment does cause

harmful interference to radio or television reception,

which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and

receiver.

-Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV

technician for help.

DATOS ELECTRICOS DE OPERACIÓN:

Teléfono: 3.8V⎓

Adaptador de Corriente ca/cc:

Entrada: 100 - 240V ~ 50/60Hz 250mA

Salida: 5.0V ⎓1000mA

Tabla de contenidos

Otros manuales de Teléfono móvil de Zte

Zte

Zte Z2321U Instrucciones originales

Zte

Zte Render Manual de usuario

Zte

Zte Kis3 max Manual de usuario

Zte

Zte AXON 10PRO Manual de usuario

Zte

Zte Compel Manual de usuario

Zte

Zte TELSTRA EASYTOUCH DISCOVERY 3 Manual de usuario

Zte

Zte Warp sync Manual de usuario

Zte

Zte A301+ Manual de usuario

Zte

Zte txtster CDMA 1X EVDO Manual de usuario

Zte

Zte Blade A52 Lite Manual de usuario

Zte

Zte verizon Blade VANTAGE 2 Manual de usuario

Zte

Zte AVID 828 Manual de usuario

Zte

Zte Telstra BubbleTouch Manual de usuario

Zte

Zte Telstra 4GX Smart A112 Manual de usuario

Zte

Zte A711G Manual de usuario

Zte

Zte Z233V Manual de usuario

Zte

Zte BLADE V8 MINI Manual de usuario

Zte

Zte Z837VL Manual de usuario

Zte

Zte F159 Manual de usuario

Zte

Zte BLADE A110 Manual de instalación y operación

Zte

Zte Blade V220 Manual de usuario

Zte

Zte Smart E8 Manual de usuario

Zte

Zte C350 Manual de usuario

Zte

Zte -C N600 + Manual de usuario

Manuales populares de Teléfono móvil de otras marcas

Nokia

Nokia Lumia 620 Manual de usuario

Blackbe;rry

Blackbe;rry KEYone Manual de usuario

Bea-fon

Bea-fon X5 Premium Manual de usuario

Blackbe;rry

Blackbe;rry 8707 Series Manual de usuario

Blackbe;rry

Blackbe;rry Storm Instrucciones de funcionamiento

LG LM-X420QN Manual de usuario

LifeWatch

LifeWatch V Manual de usuario

Bea-fon

Bea-fon SILVER LINE SL860 Manual de usuario

IKI Mobile

IKI Mobile KF4.5i Manual de usuario

Hitech

Hitech HT-850 Manual de usuario

Yezz

Yezz Fashion F10 Manual de usuario

Point Mobile

Point Mobile PM60 Manual de usuario

Blackbe;rry

Blackbe;rry Q10 Manual de usuario

Blackbe;rry

Blackbe;rry Bold 9900 Manual de usuario

Blackbe;rry

Blackbe;rry STORM 9500 - VERSION 5.0 Manual de usuario

LG LM-K420EMW Manual de usuario

ISAFE MOBILE

ISAFE MOBILE IS655.2 Manual de usuario

LG Thrive Manual de usuario