Zte Blade A72 Manual de usuario
Quick Start Guide
Quick Start Guide
1
Quick Start Guide (en)…………………….………2
Kurzanleitung (de)…………………………………15
Ghid rapid (ro) …………………..………….…….28
Vodičza brzi početak (sr) …….….……..……….41
Skrócona instrukcja obsługi (pl) ……..…………54
Kratke upute (hr) .....…....….….….….……….….67
Οδηγός γρήγορης εκκίνησης (el) ……….………80
Rövid üzembe helyezési útmutató (hu) …..……93
Stručný návod na obsluhu (sk) ……..…….……106
Stručný návod k použití (cs) …….…….………119
Ръководство за бърз старт (bg) ….…….……132
Краток водич за користење (mk) ……………145
Priročnik za hitro nastavitev (sl) ….….….……158
Vodičza brzi početak (bs) ………….………….171
2
ZTE Blade A72
Quick Start Guide
3
LEGAL INFORMATION
Copyright © 2022 ZTE CORPORATION.
All rights reserved.
No part of this publication may be quoted, reproduced,
translated or used in any form or by any means,
electronic or mechanical, including photocopying and
microfilm, without the prior written permission of ZTE
Corporation.
Notice
ZTE Corporation reserves the right to make
modifications on print errors or update specifications in
this guide without prior notice.
We offer self-service for our smart terminal device users.
Please visit the ZTE official website (at
www.ztedevices.com) for more information on user
manual, self-service and supported product models.
Information on the website takes precedence.
Disclaimer
ZTE Corporation expressly disclaims any liability for
faults and damages caused by unauthorized
modifications of the software.
Images and screenshots used in this guide may differ
from the actual product. Content in this guide may differ
from the actual product or software.
Trademarks
ZTE and the ZTE logos are trademarks of ZTE
Corporation.
Android™ is a trademark of Google LLC.
The Bluetooth®word mark and logos are registered
trademarks owned by the Bluetooth SIG, Inc. and any
use of such marks by ZTE Corporation is under license.
microSDXC Logo is a trademark of SD-3C,
LLC.
Other trademarks and trade names are those of their
respective owners.
4
Getting to Know Your Phone
Your phone supports 2.4 GHz and 5 GHz Wi-Fi.
Front camera
Touch screen
Earpiece
Volume ke
y
Power key/
Fingerprint
sensor
Charging/USB
Type-C jack
Headset jack
Back cameras
and flash
Speaker
Indicator light
nano-SIM/
microSDXC
card tray
Proximity &
light sensor
5
Setting Up Your Phone
The nano-SIM card(s) can be installed or removed while
the phone is turned on.
WARNING!
To avoid damage to the phone, do not use any other kind
of SIM cards, or any non-standard nano-SIM card cut
from a SIM card. You can get a standard nano-SIM card
from your service provider.
1. Insert the tip of the tray eject tool into the hole on the
card tray.
NOTE:
Please use the tray eject tool included in the box.
Otherwise the card tray may not be ejected.
CAUTION:
Never replace the included tray eject tool with sharp
objects. Ensure that the tray eject tool is perpendicular to
the hole. Otherwise, the phone may be damaged.
6
2. Pull out the card tray. You can place the nano-SIM
cards on the right and middle card slots, and place a
microSDXC card (optional) on the left card slot, as
shown. Carefully slide the tray back into place.
NOTE:
If two nano-SIM cards are installed, both cards can
connect to the 4G, 3G, or 2G network, and either card
can be used for mobile data.
Charging the Phone
Your phone’s battery should have enough power for the
phone to turn on, find a signal, and make a few calls. You
should fully charge the battery as soon as possible.
WARNING!
Use only ZTE-approved chargers and USB Type-C
cables. The use of unapproved accessories could
damage your phone or cause the battery to explode.
WARNING!
Do not remove the back cover. The battery is not
removable. Removal may cause fire or explosion.
7
1. Connect the adapter to the charging jack.
2. Connect the charger to a standard AC power outlet.
3. Disconnect the charger when the battery is fully
charged.
NOTE:
If the battery is extremely low, you may be unable to
power on the phone even when it is being charged. In
this case, try again after charging the phone for at least
20 minutes. Contact the customer service if you still
cannot power on the phone after prolonged charging.
Powering On/Off Your Phone
Make sure the battery is charged before powering on.
Press and hold the Power key to turn on your
phone.
To power off, press and hold the Power key to open
the options menu, and touch >.
NOTE:
If the screen freezes or takes too long to respond, try
pressing and holding the Power key for over 10 seconds
to restart the phone.
Waking Up Your Phone
Your phone automatically goes into sleep mode when it
is not in use for some time. The display is turned off to
save power and the keys are locked to prevent
accidental operations.
8
You can wake up your phone by turning on the display
and unlocking the keys.
1. Press the Power key to turn the screen on.
2. Swipe up on the screen.
NOTE:
If you have set a face verification, a fingerprint, an unlock
pattern, a PIN or a password for your phone, you’ll need
to use your face or fingerprint, draw the pattern, or enter
the PIN/password to unlock your screen.
Tabla de contenidos
Otros manuales de Teléfono móvil de Zte
Zte
Zte BLADE MAX 3 Manual de usuario
Zte
Zte Star 1 Manual de usuario
Zte
Zte V875 Manual de usuario
Zte
Zte R341 Manual de usuario
Zte
Zte A931G+ Manual de usuario
Zte
Zte V790 Manual de usuario
Zte
Zte T81 Manual de usuario
Zte
Zte Blade A52 Manual de usuario
Zte
Zte N799D Manual de usuario
Zte
Zte TELSTRA T809 Instrucciones de montaje
Zte
Zte Baker Manual de usuario
Zte
Zte Telstra F327S Manual de usuario
Zte
Zte Nubia N2 Manual de usuario
Zte
Zte Blade Apex Manual de usuario
Zte
Zte Z852 Manual de usuario
Zte
Zte GS309 Manual de usuario
Zte
Zte AT&T Maven 3 Manual de usuario
Zte
Zte TELSTRA T20 Manual de usuario
Zte
Zte S521 Manual de usuario
Zte
Zte KIS LITE Manual de usuario
