Zte BLADE A610 Manual de usuario
1
ZTE Blade A610
User Guide
For support contact ZTE Australia on Facebook,
Google+ Twitter and Instagram
2
Getting to Know Your Phone
3
4
Power Key
•Press and hold to power on, select phone modes, turn
airplane mode or on off, reboot your phone, or power off.
•Press to turn the display on or off
Home Key
Touch to return to the home screen from any application.
Menu Key
Touch to get the options for the current screen.
Touch and hold to see recently used applications.
Back Key
Touch to go to the previous screen.
Volume Key
Press or hold to turn the volume up or down.
5
INSERT SIM CARD(S) / MICRO SD CARD
6
Starting Up
Switch off your phone before installing or replacing the battery
or the SIM card. The microSDHC™ card is optional extra and
can be used for additional storage of photos, videos and
pictures.
Charging the Battery
1. Insert the charging lead carefully with the correct orientation.
Do not force the connector into the charging jack.
2. Connect the charger to a standard AC power outlet.
3.Disconnect the charger when the battery is fully charged.
7
Powering On/Off Your Phone
•Press and hold the Power Key to turn on your phone.
•To turn it off, press and hold the Power Key to open the
options menu. Touch Power off > OK.
Product Safety Information
Do not use hand-held
while driving
Do not use while re-fuelling
For body-worn operation
maintain a separation of
15 mm
This device may produce a
bright or flashing light
Small parts may cause a
choking hazard Do not dispose of it in a fire
This device may produce
a loud sound To prevent possible hearing
damage, do not listen at high
volume levels for long periods.
Avoid contact with
magnetic media
Avoid Extreme Temperatures
Keep away from
pacemakers and other
personal medical
devices
Avoid any contact with liquid,
keep it dry
Switch off when
instructed in hospitals
Do not attempt to disassemble
8
and medical facilities
Switch off when
instructed in aircrafts
and airports Only use approved accessories
Switch off in explosive
environments
Do not rely on this device for
emergency communications
How to get to Settings
There are a few ways to get to the Settings menu:
1. Go to Apps > Settings
2. Pull the screen down twice and press
Making Calls
1. Touch Home Key > >
2. Enter the phone number using the keypad. Touch to
delete wrong digits.
3. Press Options to add a Pause or Wait if required
4. Press and hold the 0 key to enter the plus (+) symbol for
international dialling.
5. Touch the Phone icon below the keypad to dial.
Options during a call
9
Press to open the number pad
Press to use loudspeaker (Handsfree) mode
Press to mute the microphone
Press to put the current call on hold
Press to dial in another party (Conference)
Press to End the call
When you receive a phone call
The display shows the caller ID and any additional information
about the caller saved in Contacts.
touch and slide right to to answer the call,
touch and slide left to to reject the call,
touch and slide up to to reject the call and send an
SMS which is displayed on screen. Set the SMS at Dialler >
Options > Settings > General Settings > Quick responses
TIP: You can silence the incoming ring by pressing either of the
Volume keys.
10
Adjusting Volumes
The side volume keys work in three different ways:
1. When you are on a call use the volume keys to adjust the in
call volume.
2. When you are using a media application, such as music, video
or games, the volume keys adjust the media volume.
3. At other times when you are not in either of the above states,
the volume keys set the ringtone volume or enable vibrate mode
at minimum volume.
Quick Enable Silent or Vibrate mode
With the screen On, long press the Power Key to see Silent,
Vibrate and Normal ring modes indicated by the icons at the
bottom of the panel.
Go to Apps > Settings > Audio Profiles > > Vibrate to enable
Vibrate on Ring.
Access the Quick Settings Panel
Swipe down from the top of the screen to view the Quick
Settings panel. Tap each icon to switch On or Off. Touch Wi-Fi
or Bluetooth (under the line) to configure those features.
Connect to a local Wi-Fi network
1. Touch Home > Apps > Settings > Wi-Fi, switch to On.
2. Tap Wi-Fi to view available networks.
3. Touch a network name to connect to it.
Previously connected networks will connect automatically. If the
Otros manuales para BLADE A610
1
Tabla de contenidos
Otros manuales de Teléfono móvil de Zte
Zte
Zte V790 Manual de usuario
Zte
Zte V6700 Manual de usuario
Zte
Zte TELSTRA SMART TOUCH 2 Manual de usuario
Zte
Zte Axon 11 Manual de usuario
Zte
Zte Blade Q Maxi Manual de usuario
Zte
Zte Kis3 max Manual de usuario
Zte
Zte A712+ Manual de usuario
Zte
Zte Z862VL Manual de usuario
Zte
Zte AT&T Z432 Manual de usuario
Zte
Zte Tania Manual de usuario
Zte
Zte G650 Manual de usuario
Zte
Zte Charm Ring R1 Manual de usuario
Zte
Zte nubia Z50S Pro Manual de usuario
Zte
Zte ZTEA7040C Manual de usuario
Zte
Zte Z933 Manual de usuario
Zte
Zte R621 Manual de usuario
Zte
Zte Blade A511 Manual de usuario
Zte
Zte Z223 Manual de usuario
Zte
Zte Blade V50 5G Manual de usuario
Zte
Zte R550 Manual de usuario
