Zoom F8n Instrucciones de montaje

Otros manuales para F8n

1

Otros manuales de Equipo de grabación de Zoom

Manuales populares de Equipo de grabación de otras marcas

KV2 Audio

KV2 Audio 500 Series Manual de usuario

Robotics Technologies

Robotics Technologies microBus-Cam II Manual de usuario

Seca

Seca 460 Manual de usuario

Cognex

Cognex MVS-8000 Series Manual de usuario

Mect

Mect MPNC006 Series Manual de usuario

Bad Caf

Bad Caf THE LEASH Manual de usuario

Strymon

Strymon NIGHTSKY Manual de usuario

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Manual de usuario

Tews Technologies

Tews Technologies TPMC465 Manual de usuario

Honeywell

Honeywell Excel 50 Manual de usuario

SeaLevel

SeaLevel COMM+8.LPCI Manual de usuario

Arturia

Arturia AUDIOFUSE STUDIO Manual de usuario

Rukra

Rukra RK-1240 Manual de usuario

Samson

Samson SCOM Manual de usuario

Dynacord

Dynacord DPS260 Manual de usuario

Nice

Nice Core Manual de usuario

Pyle Pro

Pyle Pro PSS8 Manual de usuario

RF-System

RF-System TinyGate Manual de uso y cuidado

F8n Firmware Update Guide

Copyright(C) 2021 ZOOM Corporation. All Rights Reserved.

Copying or reprinting this manual in part or in whole without permission is prohibited.

Windows® is a registered trademark of Microsoft® Corporation.

Mac® is a trademark or registered trademark of Apple Inc.

Note: All trademarks and registered trademarks in this document are for identification purposes only and are not

intended to infringe on the copyrights of their respective owners.

Proper display is not possible on grayscale devices.

The illustrations in these instructions might differ from actual screens.

● Zoom Corporation does not bear liability for any damages or third-party

claims arising from the use of the software, whether directly or indirectly.

Unauthorized redistribution, sale, leasing, renting, alteration, or reverse

engineering of the software is prohibited. Features and specifications of the

software and the contents of the documentation may be changed in future

without notice.

2

This guide explains firmware update to Ver. 2.10 as an example.

Download the ZIP file containing the firmware update file from F8n download page.

3

■For Windows

1. Extracting the ZIP file.

Select the folder where you downloaded the ZIP file. ① Click "Compressed Folder Tools", then

② "Extract All". The ZIP file will be extracted.

Folder_C

Folder_D 󰴧

Folder_C

MyFolder

󰴦

2. Copying the firmware update file to a SD card.

Copy the “F8nSYSTEM.BIN” file to the root directory on a SD card.

The firmware update file

Copy the firmware update

file to the USB flash drive.

F8n_v2.10E.zip

F8nSYSTEM.BIN

F8n_System

Software Version

History_210_en.pdf

F8n_v2.10E

This PC > Downloads > F8n_v2.10E

This PC > Downloads > F8n_v2.10E

F8n_v2.10E

F8nSYSTEM.BIN

F8n_System

Software Version

History_210_en.pdf

F8nSYSTEM.BIN

F8n_SD

Copy the firmware update

File to a SD Card.

The firmware update file

SD Card

F8n_SD

F8n_SD

3

F8n_Firmware_Upd

ate_Guide_E.pdf

F8n_Firmware_Upd

ate_Guide_E.pdf

Folder_A

Folder_D

4

■For Mac

1. Opening the downloaded file.

After downloading, click "Downloads" displayed at the bottom of the screen. Then click ➁ to open

the downloaded file.

󴨙

󰴦

2. Copying the firmware update file to a SD card.

Copy the “F8nSYSTEM.BIN” file to the root directory on a SD card.

The firmware update file Copy the firmware update

file to a SD card.

SD card

F8n_v2.10E

F8n_v2.10E

F8n_System_

Softwar…10_en.pdf

F8nSYSTEM.BIN

F8nSYSTEM.BIN

ate_Guide_E.pdf

F8n_Firmware_Upd

5

The following is the same procedure for Windows and Mac.

1. Insert the SD card into the SD CARD 1 slot.

2. Install new batteries in the F8n or connect the AC adapter.

3. Turn the power on while pressing .

NOTE

・Always make certain that the power is off when inserting or removing a SD card. Inserting or

removing a card while the power is on could result in data loss.

・When inserting a SD card, be sure to insert the correct end with the top side up as shown.

NOTE

・If the SD card is loaded in the SD CARD 2 slot, eject it before updating.

①

②

6

4. Use to select “Yes” and press .

5. After the update completes, turn the power off.

NOTE

・During the firmware update, do not turn the power off or remove the SD card. It could cause the

F8n to be unstartable.

・In the unlikely event that a firmware update should fail, conduct the procedures from the

beginning to update the firmware again.

7

Check the firmware version.

1. Press .

2. Use to select “SYSTEM” and press .

3. Use to select “Firmware Version”, and press .

Check the Firmware Version displayed on the screen.

©2021 ZOOM CORPORATION Z2I- 4249-01