ZKTeco TL300B Manual de usuario

Model: TL300

Version: 1.0

Installation Guide

Due to regular upgrades of systems and products, ZKTeco could not guarantee exact consistency between

the actual product and the written information in this manual.

Important Notes

1. Please read this Installation Guide carefully or contact the Customer Care for any

queries regarding installation.

2. Installation is recommended to be performed by a professional to avoid any

additional service charges that may cause due to improper product installation.

3. We constantly revise the contents of this Installation Guide and update our

products to improve the quality and performance without any prior notice.

4. Do not insert batteries before installing the lock.

Table of Contents

What’s in the Box................................................................................................................1

Installation Diagram..........................................................................................................2

Installation Procedure .......................................................................................................2

1. Door Properties .................................................................................................................................................................2

2. Drilling Holes on the Door.........................................................................................................................................4

3. Installing Mortise..............................................................................................................................................................4

4. Installing Outdoor Unit ................................................................................................................................................5

5. Installing Mounting Plate and Gasket................................................................................................................5

6. Installing Indoor Unit.....................................................................................................................................................6

7. Installing Battery and Cover......................................................................................................................................6

8. Installing Strike Plate and Box .................................................................................................................................7

9. Physical Testing..................................................................................................................................................................7

What’s in the Box

Door Thickness Spindle A Spindle B Screw B Screw C

38 to 46 mm

65 mm 50 mm

30 mm

45 mm

47 to 48 mm

55 mm

49 to 50 mm

85 mm 60 mm

51 to 55 mm

45 mm

56 to 60 mm 60 mm

Note: Screws and Spindles for the doors of thickness from 38 to 60 mm are included in

the standard package. Please use the appropriate set of screws as per your door's

thickness, to assure the proper functioning of the lock.

Outdoor Unit Indoor Unit Mounting Plate

Gasket

Mortise

Strike Plate and Box

Keys

MF Cards

Spindle A & B

Screw A

Screw B

Screw C

Screw D

Installation Diagram

Installation Procedure

Door Properties

A. Measure the door thickness

Measure the door thickness and select the proper Spindle and Screw length. For details,

please refer to the table in Page 1.

B. Check the door opening direction

The position of the handle is determined by the opening direction of the door. Below is

the graphical representation of door opening direction in reference to your location

outside the room.

Outdoor Unit

Indoor Unit

Gasket

Mounting Plate

Mortise

Strike Plate

and Box

Spindle A

Spindle B

Keys

Batteries

(not included)

Battery

Cover

Screw B

Screw C

Screw A

Screw D

Door

Adjust the direction of latch (if needed)

1) Push the reversing block in downward direction.

2) Push the latch bolt into the mortise.

3) Rotate the latch bolt at 180° inside the mortise,

and then loosen it.

C. Change the handle direction (if needed)

1) Use a screwdriver to remove the screw of handle. Take the handle out from the

lock.

2) Change the direction and replace the handle in its position. Again secure the

handle with the screw.

Left Inward Right Inward

Left Outward Right Outward

Mortise

Strike Plate

Mortise

Strike Plate

Mortise

Strike Plate

Mortise

Strike Plate

User Location

D. Change the location of stud bolts (if needed)

If the holes are already drilled on the door, you can adjust the location of two stud bolts

to fix the lock.

Drilling Holes on the Door Installing Mortise

1) Place the Installation Template at

the desired handle height.

2) Mark for the holes to be drilled

and drill the marked places.

Secure the Mortise with the Screw A.

Installing Outdoor Unit

Installing Mounting Plate and Gasket

1) Attach the Mounting Plate to the Gasket and route the cable through the hole.

2) Place the Gasket and Mounting Plate on to the door and use Screw B & Screw C to

secure them.

1) Attach the Gasket to the Outdoor Unit.

2) Insert Spindle A into the clutch. Make sure the triangle mark points towards the

door opening direction.

3) Attach the Outdoor unit to the door by inserting the cable through the drilled

holes.

Right Inward/Outward

Left Inward/Outward

Installing Indoor Unit

Installing Battery and Cover

Insert eight Alkaline AA batteries and cover them with a battery cover.

Note: Push cable into the hole.

1) Tighten the screw to fix the Spindle B.

2) Connect the cable to the port on the Indoor Unit.

3) Place the Indoor Unit properly on the Mounting Plate. Then use Screw D to secure

the Indoor Unit.

Physical Testing

A. Test the lock by rotating the handle and the

double locking knob.

Note: When the door is locked, the front handle can

be rotated, but the door remains unlocked.

B. Test the lock by using the mechanical key.

Insert the Key into key hole and rotate 90°, then

rotate the handle in downward direction to open

the door.

Note:

1) Key A is coated with brass colour, which is used only by installation professional.

Key B is coated with silver colour, which is used by the proprietor.

2) Once Key B is used, Key A will be disabled from opening the lock.

Installing Strike Plate and Box

1) Make sure that the Strike Box is aligned with the latch bolt. Then, use the

Installation Template to drill holes.

2) Align the Strike Plate and Box with the drilled holes and secure them with Screw A.

Key A

Keys B

Warning:

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may

cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more of the

following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

IMPORTANT! Any changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to operate the equipment.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cerradura de puerta de ZKTeco

ZKTeco

ZKTeco ML300 Series Manual de usuario

ZKTeco

ZKTeco LH7500 Manual de usuario

ZKTeco

ZKTeco DL30 Series Manual de usuario

ZKTeco

ZKTeco GL300 Manual de usuario

ZKTeco

ZKTeco HBL100 Manual de usuario

ZKTeco

ZKTeco LH7000 Manual de usuario

ZKTeco

ZKTeco LH3600 Manual de usuario

ZKTeco

ZKTeco ML100 Manual de usuario

ZKTeco

ZKTeco AL20DB Manual de usuario

ZKTeco

ZKTeco TL300Z Manual de usuario

ZKTeco

ZKTeco ML10 Series Manual de usuario

ZKTeco

ZKTeco ZL700 Manual de usuario

ZKTeco

ZKTeco AL-130 Series Manual de usuario

ZKTeco

ZKTeco TL100 Manual de usuario

ZKTeco

ZKTeco ML10 Series Manual de usuario

ZKTeco

ZKTeco L5000 Manual de usuario

ZKTeco

ZKTeco TL600 Manual de usuario

ZKTeco

ZKTeco ZL600 Manual de usuario

ZKTeco

ZKTeco PL10D Manual de usuario

ZKTeco

ZKTeco PL10 Series Manual de usuario

ZKTeco

ZKTeco AL30 Series Manual de usuario

ZKTeco

ZKTeco AL10B Manual de usuario

ZKTeco

ZKTeco ZL500 Manual de usuario

ZKTeco

ZKTeco ML200 Series Manual de usuario

Manuales populares de Cerradura de puerta de otras marcas

Assa Abloy

Assa Abloy effeff 827A-IP Manual de usuario

We.lock

We.lock SECBNEBL51 Manual de usuario

Iseo

Iseo MA1A Manual de usuario

ID Lock

ID Lock 150 Manual de usuario

Lockly

Lockly ACCESS TOUCH PRO Manual de usuario

iLoq

iLoq G50S Manual de usuario

SDC

SDC Z7835 Manual de usuario

ilco

ilco 452 Manual de usuario

Samsung

Samsung shs-h705 Manual de usuario

TRU-BOLT

TRU-BOLT 08102017 Manual de usuario

CDVI

CDVI 500-LADJ Manual de usuario

Igloohome

Igloohome Deadbolt 2S Metal Grey Instrucciones de instalación y mantenimiento

eSSL

eSSL FL-300 Manual de usuario

JAKO

JAKO JKBTNX4 Manual de usuario

Dorma

Dorma MUNDUS PREMIUM GK 50 Guía del usuario

SCOOP

SCOOP Pullbloc 4.1 FS Panik Manual de usuario

Yale

Yale MORTISE 8800 SERIES Manual de usuario

Siegenia

Siegenia KFV AS3500 Manual de usuario