ZKTeco LB330 Manual de usuario
LB330 Parking Barrier User Manual
P a g e | 1 Copyright© ZKTECO CO., LTD. All rights reserved.
Thank you for choosingour product. Please readthe instructions carefully
before operation. Follow these instructions to ensure that the product is
functioning properly. The images shown in this manual are for illustrative
purposesonly.
www.zkteco.com.
User Manual
LB330 ParkingBarrier
Date:June 2022
Doc Version: 1.0
English
LB330 Parking Barrier User Manual
P a g e | 2Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Copyright © 2022ZKTECO CO., LTD.All rights reserved.
Without the prior written consent of ZKTeco, no portion of this manual can be copied or
forwarded in any way or form. All parts of this manual belong to ZKTeco and its subsidiaries
(hereinafter the"Company" or "ZKTeco").
Trademark
is a registered trademark of ZKTeco. Other trademarks involved in this manual
are owned by theirrespective owners.
Disclaimer
This manual contains information on the operation and maintenance of the ZKTeco
equipment. The copyright in all the documents, drawings, etc. in relation to the ZKTeco
supplied equipment vests in and is the property of ZKTeco. The contents hereof should not
be used or shared by the receiver with any third party without the express written
permissionofZKTeco.
The contents of this manual must be read as a whole before starting the operation and
maintenance of the supplied equipment. If any of the content(s) of the manual seems
unclear or incomplete, please contact ZKTeco before starting the operation and
maintenance ofthe said equipment.
It is an essential pre-requisite for the satisfactory operation and maintenance that the
operating and maintenance personnel are fully familiar with the design and that the said
personnel have received thorough training in operating and maintaining the
machine/unit/equipment. It is further essential for the safe operation of the
machine/unit/equipment that personnel have read, understood, and followed the safety
instructions contained in the manual.
In case of any conflict between terms and conditions of this manual and the contract
specifications, drawings, instruction sheets or any other contract-related documents, the
contract conditions/documents shall prevail. The contract specific conditions/documents
shall applyin priority.
ZKTeco offers no warranty, guarantee or representation regarding the completeness of any
information contained in this manual or anyof the amendments made thereto. ZKTeco does
not extend the warranty of any kind, including, without limitation, any warranty of design,
merchantability,or fitness for a particular purpose.
LB330 Parking Barrier User Manual
P a g e | 3Copyright©2022 ZKTECO CO., LTD. All rights reserved.
ZKTeco does not assume responsibility for any errors or omissions in the information or
documents which are referenced by or linked to this manual. The entire risk asto the results
and performanceobtained from using the information is assumed by the user.
ZKTeco in no event shall be liable to the user or any third party for any incidental,
consequential, indirect, special, or exemplary damages, including, without limitation, loss of
business, loss of profits, business interruption, loss of business information or any pecuniary
loss, arising out of, in connection with, or relating to the use of the information contained in
or referenced by this manual, even if ZKTeco has been advised of the possibility of such
damages.
This manual and the information contained therein may include technical, other
inaccuracies or typographical errors. ZKTeco periodically changes the information herein
which will be incorporated into new additions/amendments to the manual. ZKTeco reserves
the right to add, delete, amend, or modify the information contained in the manual from
time to time in the form of circulars, letters, notes, etc. for better operation and safety of the
machine/unit/equipment. The said additions or amendments are meant for improvement
/better operations of themachine/unit/equipment and such amendments shall not give any
right to claim anycompensation or damages under any circumstances.
ZKTeco shall in no way be responsible (i) in case the machine/unit/equipment malfunctions
due to any non-compliance of the instructions contained in this manual (ii) in case of
operation of the machine/unit/equipment beyond the rate limits (iii) in case of operation of
the machine and equipment in conditions different from the prescribed conditions of the
manual.
The product will be updated from time to time without prior notice. The latest operation
procedures andrelevant documents are available on http://www.zkteco.com.
If there is anyissuerelatedto theproduct, please contactus.
ZKTeco Factory India
Address B-1, Khata No.31,Devasandra Industrial Estate,
Whitefield Main Road, Beside PhoenixMall,
Mahadevapura,Bengaluru, Karnataka.
Phone 080 6828 1342
For business-related queries, please write to us at india@zkteco.com.
To know more about our global branches, visit www.zkteco.com.
LB330 Parking Barrier User Manual
P a g e | 4Copyright©2022 ZKTECO CO., LTD. All rights reserved.
About the Company
manufacturers of RFID and Biometric (Fingerprint, Facial,
Finger-vein) readers. Product offerings include Access Control readers and panels, Near &
Far-range Facial Recognition Cameras, Elevator/floor access controllers, Turnstiles, License
Plate Recognition (LPR) gate controllers and Consumer products including battery-operated
fingerprint and face-reader Door Locks. Our securitysolutions are multi-lingual and localized
in over 18 different languages. At the ZKTeco state-of-the-art 700,000 square foot ISO9001-
certified manufacturing facility, we control manufacturing, product design, component
assembly, and logistics/shipping, all under one roof.
The founders of ZKTeco have been determined for independent research and development
of biometric verification procedures and the productization of biometric verification SDK,
which was initially widely applied in PC security and identity authentication fields. With the
continuous enhancement of the development and plenty of market applications, the team
has gradually constructed an identity authentication ecosystem and smart security
ecosystem, which are based on biometric verification techniques. With years of experience
in the industrialization of biometric verifications, ZKTeco was officially established in 2007
and now has been one of the globally leading enterprises in the biometric verification
industry owning various patents and being selectedas the National High-tech Enterprise for
6 consecutive years. Its products are protected by intellectual property rights.
About the Manual
This manualintroducesthe operations of LB330 Parking Barrier.
All figures displayed are for illustration purposes only. Figures in this manual may not be
exactly consistent with the actual products.
LB330 Parking Barrier User Manual
P a g e | 5Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Document Conventions
Conventions used in this manual arelisted below:
GUI Conventions
For Device
Convention
Description
< >
Button or key names for devices. For example, press <OK>.
[ ]
Window names, menu items, data table, and field names are inside
square brackets. For example, pop upthe [New User] window.
/
Multi-level menus are separated by forwarding slashes. For example,
[File/Create/Folder].
Symbols
Convention
Description
This impliesaboutthe notice or pays attention to, in the manual.
The general information which helps in performing the
operationsfaster.
Theinformationwhichis significant.
Care taken to avoid danger ormistakes.
The statementor eventthat warns of somethingor that serves
as a cautionary example.
LB330 Parking Barrier User Manual
P a g e | 6Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Table of Contents
1OVERVIEW........................................................................................................................... 8
2FEATURES AND FUNCTIONALITIES................................................................................... 8
3APPEARANCE AND DIMENSIONS...................................................................................... 9
4SPECIFICATIONS...............................................................................................................10
5INSTALLATION PROCEDURE............................................................................................11
INSTALLATION PRECAUTIONS ..................................................................................................11
TOOLS PREPARATION.............................................................................................................. 11
INSTALLATION OF THE BASE AND THE CASING..........................................................................12
BOOM ARM INSTALLATION......................................................................................................13
5.4.1 BOOM ARM INSTALLATION PROCEDURE..............................................................................................13
6MAIN CONTROLBOARD INSTRUCTIONS ........................................................................14
CONTROL BOARD EXTERNAL PRODUCT REQUIREMENT.............................................................14
MAIN BOARD WIRING DIAGRAM..............................................................................................14
MAIN CONTROL BOARD OPERATION........................................................................................15
6.3.1 SELF-INSPECTION LEARNINGSWITCH BARRIERLIMIT METHOD:.........................................................15
6.3.2 OPERATIONSTEPS OF THE MAIN BOARD BUTTONS:...........................................................................15
PARAMETER SETTINGS DESCRIPTION .......................................................................................16
REMOTE CONTROL PAIRING AND UNPAIRING...........................................................................19
6.5.1 REMOTE CONTROL PAIRING:..................................................................................................................19
6.5.2 DELETE REMOTE CONTROL PAIRING:....................................................................................................19
RESET .....................................................................................................................................20
7TROUBLESHOOTING ........................................................................................................20
8SAFETY PRECAUTIONS.....................................................................................................21
LB330 Parking Barrier User Manual
P a g e | 8Copyright©2022 ZKTECO CO., LTD. All rights reserved.
1Overview
The LB330 is intended for use in small parking spaces, such as those for two-wheelers and
small cars. It is a low-cost barrier with a high-performance DC brushless motor and two
arm lengths of 1.5 and 2 meters, as well as a spherical type of boom arm. It also features
inbuilt LED lights mostly night lights that turn on when there is a dark light condition; this
is controlled by a sensor that detects low light. It has two remote controllers and is
compatible with LPR cameras, UHF readers, and biometric devices.
2Features and Functionalities
1. The fastest operating speed is 5s, the speed can be adjusted according to different boom
arm lengths.
2. Digital controlmonitoring supports delay automatic close functions.
3. High safety, support power off manually rise boom arm, anti-smashfunctions.
4. The position of the angle of rising/fall can be adjusted, and the digital encoder is adopted
to limit the position automatically, replacing the traditional limit structure, and the
position control is accurate.
5. The barrier boom will rebound when itis blocked.
6. Invertibility in left and right direction, simple and compact transmission mechanism, easy
to installon site.
LB330 Parking Barrier User Manual
P a g e | 9 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
3Appearance and Dimensions
LB330 Parking Barrier User Manual
P a g e | 10 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
4Specifications
Model
LB330
Operating Speed
3s to 5s (Configurable)
Boom Length
2m
Boom Type
Round Boomwith LED Light
ChassisDimensions (L*W*H)
140*110*812 (mm)
Weight
12Kg
MotorType
24V DC Brushless Motor
OutputPower
40W
Output Current
2A
Working Voltage
DC24V
PowerSupply
AC 220V, 50Hz
Operating Temperature
-30°C to +60°C
MCBF
1 million times
Remote Control Distance
30m
Operating Humidity
90%RH
Tabla de contenidos
Otros manuales de Barrera automática de ZKTeco
ZKTeco
ZKTeco BGM1000 Series Manual de usuario
ZKTeco
ZKTeco BG1045L-LED Manual de usuario
ZKTeco
ZKTeco BG1000 Series Manual de usuario
ZKTeco
ZKTeco CMP-200 Series Manual de usuario
ZKTeco
ZKTeco BG500 Series Manual de usuario
ZKTeco
ZKTeco SBTL2000 Manual de usuario
ZKTeco
ZKTeco ProBG3000 Series Manual de usuario
ZKTeco
ZKTeco ProEntrance Series Manual de usuario
ZKTeco
ZKTeco CMP-300 Manual de usuario
ZKTeco
ZKTeco PB3000 Series Manual de usuario
