INDEX
HydroTap specifications
Installation check list .................................................................................................................... 4
General product features ............................................................................................................. 5
Important safety instructions ........................................................................................................ 6
Warnings and regulatory information ........................................................................................... 6
Major components and accessories............................................................................................. 7
Technical specifications ............................................................................................................... 8
Before installation and site requirements..................................................................................... 9
Installation instructions
Step 1 -
Measure and cut all the tap holes, fit the taps : Refer to 803341UK Tap installation
instructions supplied with the tap head, for tap mounting arrangements.
Step 2
- Check for adequate ventilation.
Section 1- Ventilation.
1.1- Ventilation for all models.............................................................................................10
Step 3
- Install the filter & tap.
Section 2 - Filter system & tap installation.
2.1- Installing the filter system........................................................................................... 11
2.2- Mounting the filter head ............................................................................................. 11
2.3- Filter installation......................................................................................................... 11
2.4- Connecting the tap..................................................................................................... 12
Step 4
- Install the Command Centre.
Section 3 - Command Centre installation.
3.1- Command Centre installation .................................................................................... 12
3.2- HydroTap Boiling Ambient models ............................................................................ 13
3.3- HydroTap Celsius Boiling & mixer tap models........................................................... 14
Step 5
- Commission the HydroTap.
Section 4 - Commissioning.
4.1- Filter flush ................................................................................................................. 15
4.2- System flush .............................................................................................................. 15
4.3- Filter replacement ...................................................................................................... 15
Section 5 - Tap operation.
5.1- Arc and Cube tap operation....................................................................................... 16
5.2- Celsius tap operation ................................................................................................. 18
Trouble shooting
Trouble shooting table.................................................................................................................. 20
End of life disposal....................................................................................................................... 21
Warranty....................................................................................................................................... 22
Contact details ............................................................................................................................. 24
