ZIMX HB1 Manual de usuario
Even if you have ridden a hoverboard for years, it is important for you
and every rider to read this manual before using this product.
*Images used in this manual may vary slightly from the product and are for reference purposes only.
HB1 Hoverboard and
H
K4 Hoverkart Attachment
BUNDLE / SET / KIT
ZIMX HB1 & HK4
USER MANUAL
V1.0.1
IMPORTANT:
KEEP FOR FUTURE REFERENCE
Warning································································2
Operating
Principals
···········································3
Introduction····························································4
HB1 Hoverboard Seat Attachment·······························5
Assembling
HK4
Hoverkart Seat Attachment···········6-7
Installing Your ZIMX HB1 Hoverboard·················7-9
Before Riding·······················································10
Riding Your HB1 Hoverboard····································11
Controls And Display··········································11-12
Charging Your HB1 Hoverboard····························12-13
Calibrate Your Hoverboard······································14
Safety
Precautions
and
Product Safety·················15-19
Safety Alerts························································20
Safety Checklist····················································21
Warranty··························································22
Customer Service Support····································23
Further Specifications & Info·································23
CONTENTS
CORRECT FITTING:
Make sure your helmet
covers your forehead.
INCORRECT FITTING:
Forehead is exposed and
vulnerable to serious injury.
1
HELMETS
SAVE LIVES!
Always wear a properly fitted helmet that complies with safety
standards when you ride your hoverboard.
2
Thank you for purchasing the ZIMX HB1 Hoverboard and ZIMX HK4
Hoverkart Bundle. Please read all instructions carefully before using
and retain this manual for future use and reference.
• In order to avoid dangers that are caused by collisions, falls, and loss
of control, please learn how to ride the HB1 safely.
• You can learn operating skills by reading the product manual and
watching online videos.
• This manual includes all operating instructions and precautions, and
users must read it carefully and follow the instructions.
• All users are responsible for any consequences caused by violating
warning contents or prompt operations.
1.Use only the supplied charger with this hoverboard.
2. Do not ride on icy or slippery surfaces.
3. Read the user manual and warnings before riding.
4. Store the HB1 and HK4 in a dry, ventilated environment.
5. When transporting the HB1, avoid violent crashes or impact.
PLEASE READ THE USER MANUAL THOROUGHLY.
This manual applies to the ZIMX HB1 Hoverboard.
ATTENTION
Failure to follow the basic instructions and safety precautions listed in
the user manual can lead to damage to your device, other property
damage, serious bodily injury, and even death.
WARNING!
3
OPERATING PRINCIPALS
The device uses digital electronic gyroscopes and acceleration sensors
to control balance and motion, depending on the user's centre of gravity.
The device also uses a control system to drive the motors that are
located within the wheels. The device has a built-in dynamic
stabilization system that can help assist with balance when moving
forward and backwards, but not while turning.
WARNING
Any hoverboard that does not work properly can
cause you to lose control and fall. Inspect the entire
device thoroughly before every ride, and do not ride it
until any problems have been corrected.
SPECIFICATIONS
Model
Net Bundle Weight HB1
11.7 kg
(HB1 + HK4)
User 20-100 kg
Weight Load
Max Speed Up to 8 mph (13 km/h)
Max Distance Range Up to 7 miles (11.2 km)
Max Incline Angle 10°
Minimum Turning Radius 0°
Battery Type Lithium-ion
Battery Voltage 36 V
Battery Capacity 2.0 Ah
Wheel Size 6.5 Inches
Tyre Type Non-Pneumatic Solid Tyres
IP Rating IPX4
TIP- To increase your stability, you must shift your weight in order to
overcome the centrifugal force during turns, especially when entering a
turn at higher speeds.
Warm Tips: The above data may vary depending on riding
conditions, rider weight, climate, and/or proper maintenance.
(For safety, the hoverboard will alarm if the
speed exceeds 10 KM/H)
4
The HB1 hoverboard is classed as a personal transporter. Our
technology and production processes are developed with strict testing
for each HB1. Riding without following the contents of this manual may
lead to damage to your device, or may cause bodily injury.
This manual is designed to give you the information you need for the
safe operation and maintenance of your HB1. Please read it thoroughly
before riding your HB1.
INTRODUCTION
PACKAGE CONTENTS
• ZIMX - HB1 Hoverboard
• Charger Adapter
• User Manual
• ZIMX - HK4 Hoverkart Seat Attachment
1. Fender / Wheel Arch
2. Rubber Foot Pad / Mat
3. Status / BatteryDisplay Indicators
4. Solid Tyre & Motor (LED Wheels)
5. LED Path Finder Lights
6. Underbody Protection Casing
7. Power Button (On/Off)
8. Charging Port
FEATURES/PARTS
ASSEMBLING HK4 HOVERKART SEAT
ATTACHMENT
6
If you have questions or concerns about any of these steps, please feel
Arepresentative will be in touch to guide you through these steps.
Carefully follow the steps shown on the following pages for assembling
the Hoverkart Seat Attachment.
Take out and open accessories box. Ensure all contents from the ‘Parts
List’ section are accounted for.
1. Mount the handles on the frame on both sides with the nuts A and
bolts B
2. Now fasten the adjustment knob into the frame and feet frame
B
BA
A
B
B
A
A
Links
INSTALLING YOUR ZIMX HB1
HOVERBOARD
7
3. Mount the seat on the frame.
4. Your HB1 HOVERBOARD SEATATTACHMENT is now completely
assembled and should look like the below image.
Carefully follow the steps shown on the following pages for assembling
the Hoverboard with Seat.
Your Hoverboard Seat Attachment must be completely assembled
before installing it onto your HB1 Hoverboard. Please refer to the ‘
ASSEMBLING YOUR HK4 HOVERKART SEATATTACHMENT’
section for assembling procedures.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de aerotabla de ZIMX
