ZIEHL-ABEGG MAXvent Manual de usuario

MAXvent

Type FV31...FV14 and DN31...DN14

Axial fans for an explosive atmosphere

Assembly instructions

Keep for reference!

L-BAL-F076-GB 1747 Index 001 Part.-No. 00705156-GB

english

Content

1 General notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

1.1 Scope of documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

1.2 Structure of the assembly instructions . . . . . . . . . . . . . . . . . . . . 4

1.3 Target group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

1.4 Exclusion of liability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

1.5 Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

2 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

2.1 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

2.2 Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

2.3 Improper use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

2.4 Explanations of symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

2.5 Product safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

2.6 Requirements placed on the personnel / due diligence . . . . . . . 8

2.7 Work on the device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

2.8 Modiﬁcations / interventions in the device . . . . . . . . . . . . . . . . . 9

2.9 Operator’s obligation of diligence . . . . . . . . . . . . . . . . . . . . . . . . 10

2.10 Employment of external personnel . . . . . . . . . . . . . . . . . . . . . . . 10

3 Product overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

3.1 Application / operational area . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

3.2 Transport, storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

3.3 Disposal / recycling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

4 Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

4.1 General notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

4.2 Special measures for fans used in Zone 21 . . . . . . . . . . . . . . . . 14

4.3 Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

4.4 Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

4.5 Connection lead & terminal box . . . . . . . . . . . . . . . . . . . . . . . . . 17

4.6 Assembly in a humid atmosphere . . . . . . . . . . . . . . . . . . . . . . . 17

4.7 Assembly of the MAXvent fan . . . . . . . . . . . . . . . . . . . . . . . . . . 18

5 Electrical installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

5.1 Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

5.2 Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

5.3 EMC-compatible installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Assembly instructions MAXvent

L-BAL-F076-GB 1747 Index 001 Part.-No. 00705156-GB

2/36

6 Start-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

6.1 Prerequisites for commissioning . . . . . . . . . . . . . . . . . . . . . . . . . 23

6.2 Check before commissioning . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

6.3 During start-up check the following . . . . . . . . . . . . . . . . . . . . . . . 24

7 Trouble shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

7.1 Code of behaviour in the event of faults . . . . . . . . . . . . . . . . . . . 24

7.2 Possible causes and remedial measures . . . . . . . . . . . . . . . . . . 25

8 Service work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

8.1 Repairs / maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

8.2 Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

9 Enclosure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

9.1 EC Declaration of Incorporation . . . . . . . . . . . . . . . . . . . . . . . . . 29

9.2 EU declaration of conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

9.3 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

9.4 Manufacturer reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Assembly instructions MAXvent

L-BAL-F076-GB 1747 Index 001 Part.-No. 00705156-GB

3/36

1 General notes

1.1 Scope of documentation

This document is valid for MAXvent axial fans type FV… and DN… (see rating plate),

which are suitable for use in an explosive atmosphere.

The complete documentation for the product consists of these fan assembly instructions

and the motor operating instructions.

To ensure the ﬁnal suitability of the product for the permissible conditions of use

speciﬁed in the order acknowledgement, it is absolutely imperative to observe the

fan assembly instructions and the motor operating instructions. In particular, this

applies to safety instructions, storage, transport, assembly and service.

If necessary, you can request the motor operating instructions from the motor manufac-

turer in your desired language.

Information

In the case of fans with the quality mark (

rating plate), please note the related

speciﬁcations depending on the application location.

1.2 Structure of the assembly instructions

Before installation and start-up, read this assembly instructions carefully to ensure

correct use!

We emphasize that these assembly instructions apply to speciﬁc units only, and are in

no way valid for the complete system!

Use these assembly instructions to work safely with and on the device. They contain

safety instructions that must be complied with as well as information that is required for

failure-free operation of the device.

Keep these assembly instructions together with the device. It must be ensured that all

persons that are to work on the device can refer to the assembly instructions at any time.

Keep the assembly instructions for continued use. They must be passed-on to all

successive owners, users and ﬁnal customers.

1.3 Target group

The assembly instructions address persons entrusted with planning, installation, com-

missioning and maintenance and servicing and who have the corresponding qualiﬁca-

tions and skills for their job.

1.4 Exclusion of liability

Concurrence between the contents of these assembly instructions and the described

hardware and software in the device has been examined. It is still possible that non-

compliances exist; no guarantee is assumed for complete conformity. To allow for future

developments, construction methods and technical data given are subject to alteration.

We do not accept any liability for possible errors or omissions in the information con-

tained in data, illustrations or drawings provided.

ZIEHL-ABEGG SE is not liable for damage due to misuse, incorrect use, improper use

or as a consequence of unauthorized repairs or modiﬁcations.

Assembly instructions MAXvent General notes

L-BAL-F076-GB 1747 Index 001 Part.-No. 00705156-GB

4/36

1.5 Copyright

These assembly instructions contain copyright protected information. The assembly

instructions may be neither completely nor partially photocopied, reproduced, translated

or put on data medium without previous explicit consent from ZIEHL-ABEGG SE. In-

patent issue or registration on a utility model.

2 Safety

2.1 Safety instructions

This chapter contains instructions to prevent personal injury and property damage.

These instructions do not lay claim to completeness. In case of questions and problems,

please consult our company technicians.

Attention!

•Non-compliance with the information and safety instructions listed in these assembly

instructions can cause serious health and safety risks!

•It is essential to observe the notes in the motor manufacturer’s assembly instructions,

which are part of the scope of supply.

It is essential to observe the following points:

•The fans are exclusively intended for use in explosive atmospheres of Zone 1 and 2

for gases or Zone 21 and 22 for dust (see rating plate).

•The conveyance of solid matter or solids content in the conveying medium is not

permissible and can lead to dangerous situations. ZIEHL-ABEGG rejects any liability

for damage of any kind as a result of such use.

•Frequency inverters are only permissible if explicitly speciﬁed, up to a maximum

frequency of 50 Hz (for 50 Hz driven motors) or 60 Hz (for 60 Hz driven motors).

•The temperature classes of fan and motor are allowed to be different, but they must

be deﬁned according to the ignition temperature of conveying media.

•The fans must be operated in the temperature ranges speciﬁed on the rating plate.

•The operating data on the rating plate are speciﬁed for an air density of 1.2 kg/m

•Assembly and electrical connection may only be carried out by skilled personnel in

compliance of applicable standards and these assembly instructions.

•Start-up and maintenance of the device may only be carried out by skilled personnel,

who have completed ATEX training for correct performance of their work.

Assembly instructions MAXvent Safety

L-BAL-F076-GB 1747 Index 001 Part.-No. 00705156-GB

5/36

For example:

–Protection of the motor against unusual heating according to EN 60204

–Motor protection switches must be installed and set to the rated current speciﬁed

on the rating plate (a higher value is not permissible).

–The motor overheating protection equipment must be connected.

–Circuit breakers or overheating protection equipment not properly connected will

invalidate the manufacturer's warranty. Furthermore, this might lead to explosion

hazards.

–...

If the impeller is accessible, protective grilles must be installed according to EN 13857.

These must not be changed and must be adequately fastened.

Pay attention to objects at a greater height which might fall down.

Pay special attention to material combinations according to EN 14986.

Since a residual risk due to falling objects, incorrect behaviour, etc. cannot be completely

ruled out, the designer, operator or manufacturer of the installation or system in which

the fan is to be installed, must prevent any potentially hazardous situation from arising

by means of appropriate safety measures in line with standard EN ISO 12100 and

especially standard EN 14986.

The operator is responsible for maintenance of the fan.

Compliance with the EMC Directive only exists if the fan is directly connected to the

main power supply. If the fan is installed in a system or combined with other products,

the system manufacturer is responsible for compliance with the EMC Directive.

•The fans must be arranged at a reasonable distance from transmitters or be protected

by suitable shielding.

•The components (tubular housing, grille, etc.) made of stainless steel 1.4031 can

become magnetic through impact. This must be prevented by using austenitic and

non-magnetic steels (EN 14986).

Responsibility of users

•The owner or operator must ensure that the equipment (fan and electrical system) is

used according to the description in these instructions and kept in good operating

condition.

•The user shall only put the fan into operation after it has been properly installed.

•The fan must be operated in accordance with the assembly instructions.

•To ensure operability, safety devices (especially the overheating protection equip-

ment) must be checked regularly.

•The instructions for installation and use must be complete and available to users at

any time.

•Users must be trained with regard to the hazards associated with the operation of an

installation in an explosive atmosphere and the intended use of the installation.

•No safety and warning instructions on the fan may be removed, and the user must

make sure that they are legible.

•The persons responsible for the installation, start-up, operation and maintenance of

the device must be competent and possess sufﬁcient experience to correctly perform

their work.

Assembly instructions MAXvent Safety

L-BAL-F076-GB 1747 Index 001 Part.-No. 00705156-GB

6/36

•In addition, they must know the European standards and guidelines (at national and

regional level and if applicable the in-house regulations) for safety and hazard

prevention. A new user may only work under the supervision of an experienced

operator.

•This device must not be used by persons with limited physical and mental abilities.

Moreover, the minimum legal age must be observed, and users must be adequately

trained.

2.2 Intended use

Attention!

•The fans are only intended for the conveyance of air or mixtures similar to air.

•Any other use above and beyond this is considered not for the intended purpose

unless agreed otherwise by contract. The manufacturer will not be liable for any

damage resulting from this. The individual or company using it bears the sole risk.

•Do not connect built-in fans to open ﬂue pipes of gas and other ﬁring devices.

•Built-in fans with VDE approval (see rating plate) are designed to be installed inside

devices and are not suitable for the direct mains connection.

•Reading these document and complying with all contained instructions -especially the

safety notiﬁcations contained therein -are considered part of intended use.

•To consider is also the documentation of attached components.

2.3 Improper use

Attention!

Any improper use may cause material damage and serious risk of injury or danger to life.

Not the manufacturer, rather the operator of the device is liable for any personal harm or

material damage arising from non-intended use.

Possible consequences of improper use: Damage to bearings, formation of corrosion,

imbalance, vibrations, warping, etc. as well as the development of risks for users and the

environment (risk of explosion).

Examples of improper use (list not intended to be exhaustive):

•Operation with ice particles

•Conveyance of abrasive or adhesive media.

•Conveying of gases with a temperature outside the operating temperature speciﬁed

on therating plate.

•Conveying of corrosive gases

•Transfer of solids or solids content in the transfer medium.

•Operation with iced up fan impellers.

•Conveyance of liquid media.

•Use of the fan and add-on parts (e.g. safety grille) as a resting surface or climbing aid.

•Unauthorised constructional modiﬁcations to the fan.

•Operation of the fan as a safety component or for the performance of safety-relevant

functions in the sense of EN ISO 13849-1.

•Blocking or braking of the fan by inserting objects.

•Holding or carrying the fan on the impeller

Assembly instructions MAXvent Safety

L-BAL-F076-GB 1747 Index 001 Part.-No. 00705156-GB

7/36

•Loosening of fan blade, impeller and balancing weight

•Dismantling of the impeller

•Every other use which can lead to a hazardous situation

•All applications not listed in the intended use.

2.4 Explanations of symbols

Safety instructions are highlighted with warning triangles and are depicted

according to the degree of hazard as follows.

Attention!

General hazardous area. Death or severe injury or signiﬁcant property damage can

occur if the corresponding precautions are not taken!

Danger due to electric current

Danger by dangerous, electric voltage! Death or severe injury can occur if the

corresponding precautions are not taken!

Information

Important additional information and advice for user.

2.5 Product safety

The device conforms to the state of the art at the time of delivery and is fundamentally

considered to be reliable. The device and its accessories must only be used in a ﬂawless

condition and installed and operated in compliance with the assembly instructions and/or

operating instructions. Operating outside the device's technical speciﬁcations (see name

plate and attachment / technical data) can lead to a defect in the device and additional

damage!

Information

A separate fault and performance monitoring-system with an alarm signal function is

necessary in order to prevent personal injuries and material damages during malfunc-

tions and in case the device fails. Substitute operation must be taken into consideration!

The design and installation of the system must comply with local regulations and

directives.

2.6 Requirements placed on the personnel / due diligence

Persons entrusted with the planning, installation, commissioning and maintenance and

servicing in connection with the frequency inverter must have the corresponding qual-

iﬁcations and skills for these jobs.

In addition, they must be knowledgeable about the safety regulations, EU/EC directives,

rules for the prevention of accidents and the corresponding national as well as regional

and in-house regulations. Personnel to be trained or instructed and apprentices are only

permitted to work on the device under the supervision of an experienced person. This

also applies to personnel undergoing general training. Comply with the legal minimum

age.

Assembly instructions MAXvent Safety

L-BAL-F076-GB 1747 Index 001 Part.-No. 00705156-GB

8/36

2.7 Work on the device

Information

Mounting, electrical connection, and start-up operation may only be carried out by an

electrical specialist in accordance with electrotechnical regulations (e.g. DIN EN 50110

or DIN EN 60204)!

Danger due to electric current

•It is generally forbidden to carry out work on electrical live parts. Protection class of the

device when open is IP 00! It is possible to touch hazardous voltages directly.

•The safe isolation from the supply must be checked using a two-pole voltage

detector.

•When operation with a frequency inverter the protective conductor is carrying high

discharge currents (irrespective of the clock frequency, current-source voltage and

motor capacity). Earthing in compliance with VDE speciﬁcations shall therefore be

observed even for testing and trial conditions (EN 50 178, Art. 5.2.11). Without

earthing, dangerous voltages can be present on the motor housing.

•Maintenance work may only be carried out by suitably qualiﬁed personnel.

Attention, automatic restart!

•The fan / motor may switch on and off automatically for functional reasons.

•After power failure or mains disconnection an automatic restart of the fan takes place

after voltage return! Therefore the fan must be disconnected from voltage before

doing any work (

service work).

•Wait for the fan to come to a complete standstill before approaching it!

Danger of being sucked in!

Do not wear loose or hanging clothing, jewellery, etc., tie together long hair and cover it.

2.8 Modiﬁcations / interventions in the device

Attention!

For reasons of safety, no unauthorized interventions or modiﬁcations may be made on

the device. All planned modiﬁcations must be authorized by the manufacturer in writing.

Use only genuine spare parts / genuine wearing parts / genuine accessories from

ZIEHL-ABEGG.These parts were speciﬁcally designed for the device. There is no

guarantee that parts from non-original sources are designed and manufactured in

correspondence with load and safety requirements.

Parts and optional equipment not supplied by ZIEHL-ABEGG are not approved by

ZIEHL-ABEGG for use.

Assembly instructions MAXvent Safety

L-BAL-F076-GB 1747 Index 001 Part.-No. 00705156-GB

9/36

2.9 Operator’s obligation of diligence

•The contractor or owner must also ensure that the electric systems and equipment

are operated and maintained in accordance with electro-technical regulations.

•The owner is obliged to ensure that the device is operated in perfect working order

only.

•The device may only be used as intended (see “Application”).

•You must periodically examine the safety equipment for their properly functioning

condition.

•The assembly instructions and/or operating instructions are always readily available

at the location where the device is being used, are complete and are in legible

condition.

•These persons are regularly instructed in all applicable questions regarding occupa-

tional safety and environmental protection and are knowledgeable regarding the

assembly instructions and/or operating instructions and, especially, are familiar with

the safety instructions contained therein.

•All safety and warning notices attached to the device are never removed and remain

legible.

2.10 Employment of external personnel

Maintenance and service work are frequently carried out by external employees who

often do not recognize the speciﬁc situations and the thus resulting dangers.These

persons must be comprehensively informed about the hazards in their area of activity.

It is the site manager's task to obtain information about potential hazards related to the

ATEX Zone and to ensure that personnel are adequately trained in the tasks to be

performed.

You must monitor their working methods in order to intervene in good time if necessary.

Assembly instructions MAXvent Safety

L-BAL-F076-GB 1747 Index 001 Part.-No. 00705156-GB

10/36

Tabla de contenidos

Otros manuales de Admirador de ZIEHL-ABEGG

ZIEHL-ABEGG

ZIEHL-ABEGG FA Series Manual de usuario

ZIEHL-ABEGG

ZIEHL-ABEGG ECblue Manual de usuario

ZIEHL-ABEGG

ZIEHL-ABEGG AMblue Manual de usuario

ZIEHL-ABEGG

ZIEHL-ABEGG FA Series Manual de usuario

ZIEHL-ABEGG

ZIEHL-ABEGG FB Series Manual de usuario

ZIEHL-ABEGG

ZIEHL-ABEGG ECblue Manual de usuario

ZIEHL-ABEGG

ZIEHL-ABEGG ECblue Manual de usuario

ZIEHL-ABEGG

ZIEHL-ABEGG ECblue Manual de usuario

ZIEHL-ABEGG

ZIEHL-ABEGG ECblue BASIC-MODBUS Manual de usuario

ZIEHL-ABEGG

ZIEHL-ABEGG FE2owlet-ECQ Manual de usuario

ZIEHL-ABEGG

ZIEHL-ABEGG ECblue Manual de usuario

ZIEHL-ABEGG

ZIEHL-ABEGG RH Series Manual de usuario

ZIEHL-ABEGG

ZIEHL-ABEGG ER25C Manual de usuario

ZIEHL-ABEGG

ZIEHL-ABEGG FB Series Manual de usuario

ZIEHL-ABEGG

ZIEHL-ABEGG FA Series Manual de usuario

ZIEHL-ABEGG

ZIEHL-ABEGG ECblue Manual de usuario

ZIEHL-ABEGG

ZIEHL-ABEGG ZAtop SM132 Manual de usuario

ZIEHL-ABEGG

ZIEHL-ABEGG ECblue BASIC-MODBUS Manual de usuario

ZIEHL-ABEGG

ZIEHL-ABEGG RH Series Manual de usuario

ZIEHL-ABEGG

ZIEHL-ABEGG ZETATOP SM 225.60B Manual de usuario

ZIEHL-ABEGG

ZIEHL-ABEGG FE2owlet-ECQ Manual de usuario

ZIEHL-ABEGG

ZIEHL-ABEGG ER C Series Manual de usuario

ZIEHL-ABEGG

ZIEHL-ABEGG ECBLUE MODBUS Manual de usuario

ZIEHL-ABEGG

ZIEHL-ABEGG FA Series Manual de usuario

Manuales populares de Admirador de otras marcas

ELTA FANS

ELTA FANS H03VV-F Manual de usuario

Hunter

Hunter 20714 Manual de instrucciones

Emerson

Emerson CARRERA VERANDA CF542ORB00 Manual de usuario

Hunter

Hunter Caraway Manual de instrucciones

Panasonic

Panasonic FV-15NLFS1 Manual de usuario

Kompernass

Kompernass KH 1150 Manual de usuario

VES

VES FALA100/12V/TR Manual de usuario

Vertiv

Vertiv Liebert DCD Manual de usuario

Westinghouse

Westinghouse GFP Series Manual de usuario

Venmar

Venmar KUBIX HRV PLUS Series Manual de usuario

Maico

Maico ECR 31 Manual de usuario

Sonnenkonig

Sonnenkonig Dinky Manual de usuario

S&P

S&P ECOWATT HXBR Manual de usuario

Wider

Wider IMP03369BH Manual de usuario

Panasonic

Panasonic F-60DHN Manual de usuario

Hinkley

Hinkley HIGHLAND Manual de usuario

Broan

Broan 766BN Manual de usuario

Premium

Premium PFS16022 Instrucciones de montaje