Zennio KNX USB SC Manual de usuario

Zennio KNX USB SC

KNX USB Interface

ZSYUSBSC

USER MANUAL

Application Program Version: [1.0]

User Manual Version: [1.0]_a

www.zennio.com

KNX USB SC

http://www.zennio.com Technical Support: http://support.zennio.com

CONTENTS

Contents ........................................................................................................................................ 2

1 Introduction .......................................................................................................................... 3

1.1 KNX USB SC.................................................................................................................... 3

1.2 Installation..................................................................................................................... 4

2 Configuration......................................................................................................................... 6

3 ETS Parameterisation ............................................................................................................ 7

KNX USB SC

http://www.zennio.com Technical Support: http://support.zennio.com

1INTRODUCTION

1.1 KNX USB SC

KNX USB SC is the solution from Zennio for the interconnection between a PC and the

KNX bus via USB with no need of external power.

This interface permits interacting with the various devices connected to the bus, and

performing tasks such as:

Address, parameter and application program downloads to KNX devices.

Bus diagnostics.

Connection and data transfer monitoring.

Among the features of the device, the most outstanding are:

Low consumption.

Easy installation and use.

USB 2.0 compatibility.

Status LEDs.

Support for long messages (up to 220 bytes).

Electrically isolated bus connection.

Compatibility with applications & platforms unsupported by the KNX

FALCON driver (e.g.: Linux).

KNX USB SC

http://www.zennio.com Technical Support: http://support.zennio.com

1.2 INSTALLATION

Figure 1 shows a scheme with all the LES indicators and required connections. This

device does not require an external power supply, it is powered through KNX bus and

USB connector.

Figure 1 Element Scheme

Zennio KNX USB Interface features two external connectors, one for connecting the

KNX bus (5) and another one for connecting to the PC (3). The latter requires a

standard USB cable with one B type end.

A short description of the main elements is provided next:

USB connection indicator LED (1): this orange LED will turn on once the

connection has been established between the USB interface and the PC.

This connection is required before performing any actions with the

programmer.

Note: being this LED on does not necessarily guarantee a correct

communication between the interface and the PC. To ensure a proper

communication, performing a connection test in ETS is advised.

KNX connection indicator LED (2): this orange LED will turn on once the

connection has been established between the interface and a properly

powered KNX bus.

1. USB connection indicator LED

2. KNX connection indicator LED

3. USB connector

4. DIN rail anchorage

5. KNX connector

36 70

KNX USB SC

http://www.zennio.com Technical Support: http://support.zennio.com

Note:in case the interface is not properly connected to a PC through the

USB port, this LED will remain off even if the bus connection has been

established.

Data transfers will make the LEDs blink. Therefore, for example, the USB LED will

blink during the assignment of an individual address to Zennio KNX USB Interface,

while it will be both LEDs that blink during an ETS download to another device

connected to the bus.

For detailed information about the technical features of the device, as well as on

security and installation procedures, please refer to the device Datasheet, included

within the device packaging and also available at www.zennio.com.

KNX USB SC

http://www.zennio.com Technical Support: http://support.zennio.com

2CONFIGURATION

On the first connection of the device to the USB port of the PC, it will be necessary to

install the corresponding device driver to the operating system, in order to make ETS

detect it (although it will probably be installed automatically when connecting the USB

to the PC). Two alternate procedures are possible:

Running the standalone driver installer file, or

Importing the device database to ETS, as the driver is provided embedded

into the database, therefore making the installation transparent to the user.

Both can be downloaded from the Zennio website: www.zennio.com, section Products

> System > KNX USB SC.

Once the driver is installed, it will be possible to use and configure the device in ETS or

any other KNX diagnose tool.

KNX USB SC

http://www.zennio.com Technical Support: http://support.zennio.com

3ETS PARAMETERISATION

This device does not require the download of an application program to start working.

Nevertheless, in order to make it possible to include the device within an ETS project,

the corresponding database (KNX USB SC) is provided, however, it does not contain

parameters, application programs or communication objects.

In addition, ETS may be used to set a basic configuration. The configuration options

can be found by accessing Extras > Options (ETS3) or Communication from ETS >

Setting (ETS4) or Options from ETS > Bus > Connections (ETS5).

The most significant options available under this tab are:

Device individual address: by default, it will be 0.2.255.

Selection and test of the desired interface, useful in case of having several

USB interfaces connected to the same PC.

For detailed information about the USB interface configuration process from ETS,

please refer to the ETS user manual and to the Help menu on the program itself.

Join us and send us your inquiries

about Zennio devices:

http://support.zennio.com

Zennio Avance y Tecnología S.L.

C/ Río Jarama, 132. Nave P-8.11

45007 Toledo (Spain).

Tel. +34 925 232 002.

www.zennio.com

[email protected]

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Equipo de grabación de Zennio

Zennio

Zennio ZRX-KCI4SO Manual de usuario

Zennio

Zennio ZRX-KCI4SO Guía

Zennio

Zennio DALIBOX ZDI-DLB4 Guía

Zennio

Zennio ZDI-DLI Manual de usuario

Zennio

Zennio KNX ZRX-KCI4S0 Guía

Zennio

Zennio ZDID64V3 Manual de usuario

Zennio

Zennio KLIC-DD Manual de usuario

Zennio

Zennio KNX ZRX-KCI4S0 Guía

Zennio

Zennio KNX KCI 4 S0 Manual de usuario

Zennio

Zennio KIPI Manual de usuario

Zennio

Zennio DALIBOX ZDI-DLB6 Guía

Zennio

Zennio KLIC-DI Guía de inicio rápido

Zennio

Zennio DALIBOX ZDI-DLB4 Guía

Zennio

Zennio BIN 44 Manual de usuario

Zennio

Zennio KLIC-DI SKY Manual de usuario

Zennio

Zennio DALIBOX Interface 64/32 Manual de usuario

Zennio

Zennio DALIBOX ZDI-DLB4 Guía

Zennio

Zennio KLIC-DI Manual de usuario

Manuales populares de Equipo de grabación de otras marcas

KV2 Audio

KV2 Audio 500 Series Manual de usuario

Robotics Technologies

Robotics Technologies microBus-Cam II Manual de usuario

Seca

Seca 460 Manual de usuario

Cognex

Cognex MVS-8000 Series Manual de usuario

Mect

Mect MPNC006 Series Manual de usuario

Bad Caf

Bad Caf THE LEASH Manual de usuario

Strymon

Strymon NIGHTSKY Manual de usuario

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Manual de usuario

Tews Technologies

Tews Technologies TPMC465 Manual de usuario

Honeywell

Honeywell Excel 50 Manual de usuario

SeaLevel

SeaLevel COMM+8.LPCI Manual de usuario

Arturia

Arturia AUDIOFUSE STUDIO Manual de usuario

Rukra

Rukra RK-1240 Manual de usuario

Samson

Samson SCOM Manual de usuario

Dynacord

Dynacord DPS260 Manual de usuario

Nice

Nice Core Manual de usuario

Pyle Pro

Pyle Pro PSS8 Manual de usuario

RF-System

RF-System TinyGate Manual de uso y cuidado