Zenith SR2786 Manual de operación y mantenimiento

//_Advanced Video Imaging

Direct View Color TV

MTS Stereo Audio

Picture-In-Picture

Surround Sound

Returnthe Product

RegistrationCard,

andyour TV

couldbe

FREE!

OPERATING'GUIDE&WARRANTY

for models...

SR2745,SR2786,SR2789,

SR3247,SR3289,SR3547

SR3589

ZENITH ELECTRONICS CORPORATION

1000 MILWAUKEE AVENUE

GLENVlEW, ILLINOIS 60025

Part No. 206-2918.O1

Pdnted in U.S.A.

EP-EDCBA

WATCH US.

WARNING: TO REDUCE THE RISK OF ELECIRIC SHOCK DO NOT

REMOVE COVER (OR BACK). NO USER SERVICEABLE

PARTS INSIDE. REFER TO QUALIFIED SERVICE

PERSONNEL.

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE

THIS PRODUCT TO RAIN OR MOISTURE.

The lightning flash with arrowhead symbol, within an equilateral

triangle, is intended to alert the user to the presence of uninsulated

"dangerous voltage" within the product's enclosure that may be of

sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to

alertthe user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the appliance.

Safety Tips

Refer to the "Safety Tips" booklet that came with your

product for important safety considerations.

Note to Cable TV System Installer

This reminder is provided to call the cable TV system

installer's attention to Article 820-40 of the NEC that

provides guidelines for proper grounding and, in particular,

specifies that the cable ground shall be connected to the

grounding system of the building, as close to the point of

the cable entry as practical.

Power-Cord Polarization

This product is equipped with a polarized alternating-

current line plug (a plug having one blade wider than the

other.) This plug will fit into the power outlet only one

way. This is a safety feature. If you are unable to insert the

plug fully into the outlet, tryreversing the plug. If the plug

should still fail to fit, contact your electrician to replace

your obsolete outlet. Do not defeat the safety purpose of

the polarized plug.

CAUTION

To prevent electric shock, match wide blade of plug to

wide slot, fully insert.

A TTENTION

Pour _viter les chocs _lectriques, introduire la lame la plus

large de la fiche darts la borne correspondante de la prise et

pousser jusqu'au fond.

CONTENTS

Part 1. Connections and Basic

Operations

INTRODUCTION

Welcome ............................................ ii

InstallationConsiderations.............................. ii

Methods of Operation................................. iii

Model/Featnres Chart ................................. iii

STANDARD CONNECTIONS FOR YOUR TV

Connection Center, Cable, VCR, S-Video,

Accessory Jacks,Speakers, Audio Amplifier,

andConnections For Using PIP ........................ 1-1

FIRST TIME YOU OPERATE YOUR TV

Control Panel, Battery Installation, Power, Source,

Auto Program, Clock, and Other Options ................ 2-1

PIP OPERATION

hltroduction, Selecting Main Picture and PIP Inset

Source, PIP Functions, Operation With Various

C.onfigurations ...................................... 3-1

Part 2. Universal Remote Control

and Menus

UNIVERSAL REMOTE CONTROL

Battery Installation, Operating Mode, TV Operations,

StarSight Operations, Operational Modes, Programming,

Special Features, Auto Find, and Brand Codes ............ 3-1

QUICK REFERENCE TO MENUS

Available Menus, and Basic Operation .................. 4-1

SOURCE MENU

Menu Operation, Source Selection,

and Source Identification ............................. 5-1

SETUP MENU

Auto Program, Ch. Add/Del, Ch. Labels, Source ID,

Clock Set, Timer Setup, Parental CtL Option/

Text, Background, and StarSight ....................... 6-1

AUDIO MENU

Bass, Treble, Balance, Audio, SEQ,

Surround and Null .................................. 7-I

VIDEO MENU

Contrast, Brightness, Color, Tint, Sharpness, Color

Temp, Video Filter, Auto Flesh, and Picture Pref .......... 8-1

PIP MENU

Ch. Guide, Ch. Review, PIP Color, PIP Tint,

and PIP Size ."...................................... 9-1

Part 3. Z-Trak Remote Control

and Menus

Z-TRAK REMOTE CONTROL

Battery Installation, Operating Mode,

Basic Operations and Auto Find ....................... 11-1

QUICK REFERENCE TO MENUS

Available Menus, Accessing the Menu,

Channel Icons and Volume Control .................... 12-1

TV OPTIONS MENU

Timer, Captions, Z-Trak, PIP, Freeze and Move PIP ....... 13-I

SOURCE MENU

Menu Operation, Source Selection,

and Source Identification ............................ 14-1

SETUP MENU

Auto Program, Ch. Add/Del, Ch. Labels, Source ID,

Clock Set, Timer Setup, Parental Cfl, Caption/

Text, Background, and StarSight ...................... 15-1

AUDIO MENU

Bass, Treble, Balance, Audio, SEQ,

Surround, and Null ................................. 16-1

VIDEO MENU

Contrast, Brightness, Color, Tint, Sharpness, Color

Temp, Video Filter, Auto Flesh, and Picture Pref ......... 17-1

PIP MENU

Ch. Guide, Ch. Review, PIP Color, PIP Tint,

and PIP Size ...................................... 18-1

Part 4. Maintenance, Accessories,

and Warranty

MAINTENANCE AND TROUBLESHOOTING

Caring, Extended Absence, Interference,

Before Calfing for Service ........................... 19-1

Replacement Product Registration Card

Accessories for Your TV

Your Zenith Warranty

How to use this operating guide

St_mdard TV installation and operation is given in this portion of the operating guide. Follow the procedures given if you will not

be using StarSight®.

A Refer to the StarSight@portion of this operating guide for StarSight@ installation and operation.

29184)1-A i

INTRODUCTION

WELCOME

Welcome into the family of Zenith Color Television owners.

This guide provides instructions on how to operate your new

TV. It is supplemented by a booklet containing Safety Tips.

We urge you to read these publications carefully so that you

will receive full enjoyment from your new Zenith TV for

many years to come.

Your new TV has been designed and built to give you the very

best in quality, features and performance. There arethousands

of Zenith authorized service centers throughout the U.S., Can-

ada and Mexico who can attendpromptly and effectively to or-

dinary service needs.

Ifyou should have an unusualperformanceor service problem

thatcannot be satisfactorilyresolved byyour Zenith dealeror

Zenith authorizedservice center, contact usat:

Zenith Electronics Corporation

Customer Service Department

1000 Milwaukee Avenue

Glenview, IL 60025

Telephone: (708) 391-8752

Mon-Fri, 8:00 a.m. - 4:30 p.m. Central Time

Send the model number, serial number, and date of purchase

or original installation, with a full explanation of the problem

and the service history. We will welcome the opportunity to

look into your specific question or problem and to be of assis-

tance in resolving it promptly.

The model and serial numbers of your new TV are located on the

back of the TV cabinet. For your future convenience and protec-

tion, we suggest that you record these numbers here:

Model No.

Serial No.

Manufactured under license from Dolby Laboratories Licensing Corporation.

"Dolby" and the double-D symbol are trademarks of Dolby Laboratories

Licensing Corporation.

INSTALLATION CONSlDERATIONS

Before you install your TV...

Ventilation -- Proper ventilation keeps your TV

running cool. Air circulates through perforations

in the back andbottom of the cabinet. Do not

block these vents oryou will shorten the life of

your TV.

_Power Source -- Your "IVis designed to operate

on normal household current, 120 volt 60 Hertz AC.

Do notattemptto operateitonDC current.

Power Cord -- Your power cord has a polarized

plug as required by Underwriters' Laboratories. It

has one regular blade and one wide blade and fits

only one way into a standard electrical outlet. If

the blades will not enter either way, your outlet is

very old and non-standard. A new outlet should be

installed by a qualified electrician.

Please read and observe each safety point in the "Safety

Tips" folder when installing and using your TV.

VIDEO GAMES AND OTHER FIXED

PATTERN DISPLAY CAUTION -- If you use your TV for

video games, teletext or otherfixed displays, avoid setting the

BRIGHTNESS control for an excessively bright picture. A

bright, fixed pattern,if used for long periods of time, can re-

sult in a permanent imprinton the TV picture tube. You can re-

duce this possibility by alternating the use of the fixed pattern

display with normal TV picture viewing, by turning down the

CONTRAST control for sustained fixed pattern use, and by

turning off the fixed patterndisplay when not in use.

PLUGGING IN YOUR TV -- Be sure to plug your TV into

an "'unswitched" AC power source. The "switched" AC out-

lets found on some video equipment will not continue supply-

ing power to the TV once the equipment is turned off. If the

power to the TV is interrupted, you will have to reset the clock

in the TV to the current time.

Safe Operation -- Your TV is manufactured and

tested with your safety in mind. However, unusual

stress caused by dropping or mishandling, expo-

sure to flood, fire, rain or moisture, or accidental

spilling of liquids into the TV, can result in poten-

tial electrical shock or fire hazards. If this hap-

pens, have your TV checked by a service

technician before using it again.

WELDIRDD ii

INTRODUCTION

METHODS OF OPERATION

Your TV is a very sophisticated appliance. Optional features, video picture adjustments and audio sound adjustments are performed

through on-screen menus anddisplays. Self explanatory ICONS are used throughout. Most features can be selected and adjusted

from the comfort of your favorite chair by using either of the infraredremote controls.

Either of two remote controls can be used to operate the "IV. Use the multi-brand programmable remote if you have different brands

and types of equipment in your video system which you need to control remotely. Use the Z-Trakprogrammable remote if you feel

comfortable using track-ball access similar to that provided by the familiar computer mouse device. Many features can be selected

and adjusted by using the control panel provided on the "IV.

StarSight provides anelectronic programming guide which is updated with new scheduling information automatically on a periodic

basis. StarSight allows you to rapidly scan through the programming guide to find a programfor viewing orrecording. Programs

can be searched and selected by category if desired.

Method of Operation

•Control Panel on TV.

•Universal Remote Control

• Z-Trak Remote Control

Standard TV

YES

StarS|ght

YES

FEATURES PROVIDED WITH YOUR TV

This operating guide describes a family of TV models. Not all models have all of the features described in this guide. Different

control panels may be used from model to model. Most models include the following features:

MODEL SR2745, SR2786, SR2789, SR3547

FEATURE

i.,,, i

•StarSight Electronic ProgramGuide

•StarSightDemonstration

• On-Screen Menus Accessed By Remote or TV Controls

• Universal ProgrammableRemote Control

• Z-Trak Programmable RemoteControl

• Picture-In-Picture

• 181Channel Tuning (STD/HRC/ICC BandSelectedAutomatically)

•Automatic Channel Programming

• Favorite Channel Add/Delete

• Channel Labels (ABC, TNT, etc.)for Easy Channel Identification

• Multiple Ingut Sources

• Source Identification (VCR, Cable, etc.)

•Antenna/Cable and Loop OutJacks

• Audio/Video (A/V)Jacks

• Super-VHS A/VInput Jacks

• Front Mounted AN Jacks

• Surround Sound System

• MTS Stereowith SEQ (SpatialEqualization)

• Surround Sound Speaker Terminals

• Variable Audio Output Jacks

• Surround Sound Speakers

• ,Sleep Timer and On/Off Timer

• Closed Caption and Text Modes

•ParentalControl

SR3247

Premium

Optional

SR3289, SR3589

Standard

Optional

Dolby

Optional

°°o

2918411-0 !11

STANDARD CONNECTIONS FOR YOUR TV

CONNECTION CENTER

ANTENNA/CABLE 1or 2

75-ohm antennaorcable-TVcon-

nection toyourTV. Attach yore

antenna, cable-TVlineor VCRto

thesejacks.

-- STARSIGHTCONTROL PORT

Jackforconnectionof StarSightRemote Emittercable.

LOOP OUT TO DECODER _ ImmummF m sm I

Routes the cable-TV input to _"'- LOOPOUT AMTEN#A ANTENNA ['_$1_Fi_Ii[]rI' [_ ..i

Antenna/Cable 2back to the cable ro_.a CAIILI_ CALL[ .[ [_ _t

box supplied by the cable service. F

t SURROUND$_I

VIDEO 1or 2 IN /

Jacks for audio and video input /

from a stereo VCR or other AN "

component. (You must connect to

these jacks in order to hear stereo

sound when playing a stereo tape.)

VARIABLE AUDIO OUTPUT

Standardpbonojack connectors

foroutputto an optionalstereo

amplifier orto externalspeakers.

SPEAKER EXT/INT

Select EXT (external) to remove

sound from the TV's speakers.

Select INT (internal) to hear sound

from the TV's speakers.

SURROUND SPEAKER

TERMINALS

Connections foroutputto optional

surround sound speakers.

VIDEO 1 LOOP OUT

Use these to send the incoming

audio and video (from Video 1 In)

to another component, such as a

second VCR.

S-VIDEO 1 IN

Jacks for audio and video input

from a Super-VHS VCR.

TURN OFF POWER OR UNPLUG TV BEFORE

MAKING ANY CONNECTION.

OTHER JACKS ON TV (Some Models)

LEFT

AUDIOINPUT /

S-VIDEO 2 IN

Jacks for audio and video input from a second Super-VHS VCR.

VIDEO 3 IN S-VIDEO 2 IN

oo0

RIGHT I VIDEOINPUT

VIDEO 3 IN

Jacks for audio and video input from athird stereo VCR or other

A/V component.

29t8-ol-o 1_1

STANDARD CONNECTIONS FOR YOUR TV

BASIC CONNECTION TO TV WITHOUT VCR

Ifa VCRwill notbeconnectedtoyourTV,youhavethreebasicconnectionoptions,asshown.

Cable TV Cable TV

Wall Jack Wall Jack

SPEAKERS

LOOPOUTANTENNA ANTENNA INT_ r-EXT

TODECODERCABLE CABLE

lCableBox OR //""" O

:STARSIGHT;

,@,@@

RIGHT LEFT

TOEXTERNALAMPORSPKR

oIIIIII

.,.EO"°"1'.'0,0_J.,OEOV'O'OA'_"*,O_

@@@@@@

n L L . _ L__

I nl LI S-VIDEOIIN

®® @.,,

LOOPOUT S-VIDEO

R L SURROUNDSPKRS

Antenna

Flat Wire 11

(300ohm) u

Adaptor I

g2.J

Round Wire

(75ohm)

:wire :_le _ i i_i]!!i_i!_!i"iiiii!i:;:f "ii; _i:_!i:.i_:_!}!;!_i:i

•Select Ant/Cable 1in Source

Menu.

• Tune TV to cable box output

channel (usually channel 3

or 4).

•Use cable box to select

channels for viewing.

•Select Ant/Cable 1 in Source

Menu.

•Use TV to select channels for

viewing.

2918-01-O 1m2

STANDARD CONNECTIONS FOR YOUR TV

BASIC CONNECTION TO TV WITH VCR

If you areconnectinga VCRto your"IV,youhavethreebasicconnectionoptions,asshown.

Cable TV Cable TV Antenna

Wall Jack Wall Jack

x\\l /,//

\ \xl // /

OR OR FlatWire]11

(300 ohm) u

LOOPOUT ANTENNA

TOOECODER CABLE

VIDEO1IN

VIDEO r-A(JOlO--t

@@@

I : 1

STARSIGIff

ANTENNA

CABLE

,,@@

fllBlff LEFi"

roEXTERNALAMPORSPKR

SPEAKER|

INT-i F-EXT

VIDEO2IN

VIDEO r--AUOiO'_

@@@

S-VIDEO1IN

VARIABLE

AUOIO

OUTPUT

iO I Illll

0I IIIII

0 i IIIll

0 IIIIII

LOOPOUT S.VIOEO N L SURROUNDSPKRS,

Round Wire

(75 ohm)

" OPERATING YOUR TV

"VCR's TV/VCR* With Cable Box Without Cable Box

'Sw_td_Set_g

TV * Select Antenna/Cable 1 in Source Menu.

•Use TV to select channels for viewing.

VCR

•Select Antenna/Cable 1 in Source Menu.

•Tune TV tocable box output channel (usually channel

3or 4).

* Use the cable box to select channels for viewing.

•Select Antenna/Cable 1 in Source Menu.

• Tune VCR to cable box output chmm.el(Usually channel

3or 4).

• Tune "IVto VCR output channel (usually channel

3 or4).

• Use the cable box to select channels for viewing.

* May be labeled TV/Video.

•SelectAntenna/Cable 1inSource Menu.

•TuneTVto VCR outputchannel (usuallychannel

3 or4).

• Use VCR to selectchannels for viewing.

_ts-0t-o 1-- 3

STANDARD CONNECTIONS FOR YOUR TV

ADDITIONAL CONNECTIONS FOR STEREO VCR

Ifyou have a stereo VCR, orotherstereoaudio/video (A/V) component, you must make these additionalconnecf!om shown below in or-

der to hear stereo sound from the component.

1 st VCR (Optional) 2ncl VCR

A/V OUTPUT ] _ -- A/V OUTPUT I

AUDIO ANTENNA i OIT-i r-EBT AUO_

CABLE CABLE !Ii_ R VIDEO

IVIOEOIlN

VlQEO r-- AIIOIO"-2

LOOPOUT l L IURROUNOIPI(H

LOOPOUT

SUPER-VHS VCR

A/V OUTPUT I

AUDIO

•Select Video 1" from the Source Menu.

•Use VCR (or other componenO to select channels for viewing.

Of,

• Watch a tape playing in the VCR.

* Select the Source in the Source Menu that corresponds to jacks

to which the A/V component is connected.

29_8-m-o 1-- 4

STANDARD CONNECTIONS FOR YOUR TV

AUDIO/VIDEO (A/V) CONNECTIONS FOR OPTIONAL VIDEO EQUIPMENT

Connections to VIDEO 3 IN

or S-VIDEO 2 IN jacks.

(Some "IV models only.) Stereo Cameorder Super-VHS VCR Y_V1DEO

OUT

OPTIONAL AUDIO AMPLIFIER/SURROUND SOUND CONNECTIONS TO TV

If you wish to listen to the'IV audio through an external amplifier or stereo system, or listen to surround sound audio, make the connec-

tions to the TV shown in the illustration below.

TURN OFF POWER OR UNPLUG TV BEFORE MAKING ANY CONNECTION.

8ohm

Surround

Speaker

Amplifier and Dual Surround Speaker Connections Single Surround Speaker Connection

DIFFERENT WAYS TO LISTEN TO YOUR "IV

Surround Sound

'IV Speakers On

*SPEAKER EXT/INT switch in the INT (in-

ternal) position --

TV speakers are ON. Sound is heard from

both the TV's speakers and the external am-

plifier's speakers.

• Use TV's volume control to raise and

lower the level of sound being heard from

both sets of speakers.

TV Speakers Off

•SPEAKER EXT/INT switch in the EXT

(external) position

TV speakers are OFF. Sound is only heard

from the speakers connected to the external

amplifier.

•Use TV's volume control to raise and

lower the level of sound being heard from

the amplifier's speakers.

Connect surround sound speakers as shown.

The level of surround sound will vary,

depending on the program being viewed.

Note that not all programs have surround

sound audio.

•The SURROUND SPKR terminals are

always active. The SPEAKERS EXT/INT

switch does not affect the operation of

surround sound speakers.

• If you want to connect only one surround

speaker to your TV, connect the speaker

wires to the terminals adjacent to the

positive (+) and negative (-) symbols that

are circled.

291s-ot.^ 1 -- 5

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de TELEVISOR de Zenith

Zenith

Zenith D27B48T Manual de operación y mantenimiento

Zenith

Zenith SENTRY 2 SY2765 Manual de operación y mantenimiento

Zenith

Zenith SM3589BT Manual de operación y mantenimiento

Zenith

Zenith C27V36 Manual de operación y mantenimiento

Zenith

Zenith SENTRY 2 SL2753S Manual de operación y mantenimiento

Zenith

Zenith SL2784BT and Manual de operación y mantenimiento

Zenith

Zenith A50M91W Series Manual de usuario

Zenith

Zenith Direct-View Concierge H27H38DT Manual de usuario

Zenith

Zenith A25B33W Manual de usuario

Zenith

Zenith C19A21D Manual de operación y mantenimiento

Zenith

Zenith A19A11D Manual de usuario

Zenith

Zenith IQB27B44 Manual de operación y mantenimiento

Zenith

Zenith Sentry 2 SR2500 Manual de operación y mantenimiento

Zenith

Zenith SY3238 Manual de operación y mantenimiento

Zenith

Zenith SENTRY 2 SLS2751Y and warranty Manual de operación y mantenimiento

Zenith

Zenith PV4663RK Manual de operación y mantenimiento

Zenith

Zenith B32AZ4W Manual de operación y mantenimiento

Zenith

Zenith SENTRY 2 SY2768 Manual de operación y mantenimiento

Zenith

Zenith Presentation H27E46DT Manual de operación y mantenimiento

Zenith

Zenith B19A23DCOM Manual de operación y mantenimiento

Zenith

Zenith A20A22DOM Manual de operación y mantenimiento

Zenith

Zenith C34W37 Series Manual de operación y mantenimiento

Zenith

Zenith H27F56DT Guía de instalación

Zenith

Zenith SENTRY 2 Z27A11 Manual de operación y mantenimiento

Manuales populares de TELEVISOR de otras marcas

Philips

Philips Colour Television Manual de usuario

Toshiba

Toshiba 27A10 Manual de usuario

Philips

Philips 42PF9630A/37 Manual de usuario

Hitachi

Hitachi 32FX48B Manual de usuario

DAEWOO ELECTRONICS

DAEWOO ELECTRONICS DTQ-14V1FC Manual de usuario

Changhong Electric

Changhong Electric uhd55b6000is Manual de usuario

Philips

Philips Matchline 21CE7551 Manual de usuario

Panasonic

Panasonic Genus TX-G10 Manual de usuario

Toshiba

Toshiba 19A20 Manual de usuario

Philips

Philips 25PT4523-16 Manual de usuario

Sony

Sony XBR-100Z9D Manual de usuario

Philips

Philips PR0930X3 Manual de usuario

Philips

Philips Brilliance 231P4QPY Manual de usuario

Samsung

Samsung 55S9 B Series Manual de usuario

Philips

Philips 32HF9385D Guía de solución de problemas

Sharp

Sharp LC-40FI5012E Manual de usuario

Loewe

Loewe Table Stand Reference 55 Manual de usuario

Philips

Philips 32PFH5300 Manual de usuario