Zebex Z-2242 Manual de usuario
Z-2242 / Z-2240
QUICK START & REGULATORY GUIDE
Product F atur s:
Acc ssory Option :
It m D scription
Syst m
Processor Qualcomm MSM8960
Dual Core 1.5GHz
Android OS Android eally Bean 4.2.2
Memory 1GB LPDDR2 SDRAM
Storage Internal 8GB eMMC Flash
(To be continued)
Display, Cam ra and
Scaning
Display
Size: 4.5"
Resolution: WVGA 720(W)*1280(H)
Display Type: TFT, Transmissive
Contrast ratio: 900 (Typ)
Brightness: 400 nits (Typ)
Backlight Type: LED
Viewing Angle: 80/80/80/80 (typ), Full viewing (IPS)
Touch Panel
Capacitive Type, 5-point multiple touch, OGS
Glass: Dragontail, Anti-explosion, Wet Finger touch,
Strengthen Glass
Scanner
Opticon MDI-3100-SR
1D/2D Barcode Hardware decode, CMOS sensor (black and
white)
Light source: Red*2 (auxiliary), Green*1 (aiming)
Effective pixel 752(H)x 480(V) dot
Aiming distance: L=110+/-20mm(from front edge of camera
module)
Image capture speed: 60 fps
Supported barcode types:
UPC-A/E/E1/addon 2/5, EAN-13/addon 2/5, EAN-
8/addon 2/5,
Code 39, Tri-optic, Codebar, Industrial 2 of 5, Interleaved 2 to
5, S-code, Matrix 2 of 5, Chinese Post Matrix 2 of 5, Korean
Postal Authority, Intelligent Mail, POSTNET, apanese Postal,
IATA, MSI/Plessey, Telepen, UK/ Plessey, Code 128/GSI 128,
CODE 93, CODE 11, GS1 Databar, GS1 Databar Limited, GS1
Databar Expanded, Codeablock F, DataMatrix ECC200,
DataMatrix ECC000-140, Aztec Code, Aztec Runes, Chinese
Sensible Code, QR Code, Micro QR Code, Maxi Code, PDF 417,
Micro PDF417, GS1 DataBar Composite, UPC/EAN Composite.
Front Camera No
Rear Camera
Sensor OmniVision MT9E013
Resolution: 8MP (3264H*2448V)
Angle of view: 74.5°C
Auto-Focus Type: VCM(Voice Coil Motor)
Focus Range: 10cm~ Infinity
Automatic Mode :
AEC (Auto exposure Control),
AGC (Auto Gain Control),
AWB (Auto White Balance),
Communication and WLAN n twork
Radio
Support Voice Call
- UMTS 1/3/5/8
(2100/1800/850/900MHz)
- GSM 850/900/1800/1900
GPS Qualcomm GPS One Gen8, AGPS, Glonass
Bluetooth
4.0 Class II EDR
Profile: PAN, HSP, HID, FTP, DUN, A2DP, AVRCP and OPP
profiles
WLAN 802.11 a/b/g/n Dual Band (2.4G/5G), Wi-Fi direct, Wi-Fi
hotspot (2.4G)
NFC (Optional)
NXP PN547
NFC detect range: 0~4cm
Card type: ISO/ICE 14443A/MIFARE; ewel/Topaz tags; FeliCa
cards; ISO/IEC 14443B; ISO/IEC 15693/ICODE
Pow r
Battery Capacity 3450 mAh (3.7V)
Battery removable Non-removable
Battery Charging
Time 4.5 hours
Battery Life 10 hours
1
Reset Function Physical key under micro SD door
1
Conditional and vary depending on different user scenario.
Charging method
(1) AC adaptor charging (via micro USB)
(2) docking station charging (no sleeve charging)
(3) battery cartridge
Wireless charger
(Optional) Qi (WPC V1.1) Compliant Power Supply
RTC Yes
P riph ral
Sensors
3-axis accelerometer
Proximity sensor
Ambient light sensor
Magnetometer
Gyroscope
GPS
Indicator
2pcs
(Indication of battery full, low battery, charging(including
wireless charging) and BT)
Receiver 1pcs
Audio ack N/A
Vibrater 1pcs
Speaker 1pcs
Microphone 2pcs
I/O
Extension port On main board (internal). Please see pin define in Appendix 1
(P.13)
Micro USB 1pcs, OTG, software upgrade, battery charging
SD Card Micro SD (SDHC can support up to 64GB)
SIM card Micro Dual SIM sockets
Buttons
Power*1
Volume (up and down)
Programmable key*3pcs
(original scan key*2pcs, original P key*1pcs)
M chanical and Environm nt
Dimension L 149.87 x W 80.24 x T 30.61 mm
Weight 345g
Ingress Protection IP65
Drop 1.5M on poly wood, 6 drops
ESD Air: ±8KV
Contact: ±4KV
Operating
Temperature (include
LCM and battery)
0°C~ 45°C battery in charging mode
-20°C+60°C battery in discharging mode
Storage Temperature
-20~+60°C
Acc ssori s (in packag )
Adaptor ack 1pcs, 5.35V/2A
Micro USB to USB
Cable 1pcs, 100cm
Hand strap 1pcs
Micro SD / Micro SIM Card Installation
Open Micro SD/Micro SIM door, insert the Micro SD into slot.
Insert Micro SIM into SIM slot.
(Not : SIM 1 is set as default network connection; SIM switch: Go to “Settings” in Android system
“SIM SWITCH” “Choose SIM” “SIM 2”)
Close the door after installation.
G tting Start d
Charge the battery
Before using the Z-2242 / Z-2240, charge the battery using one of the following
accessories approved by ZEBEX:
-Micro USB cable through PC
-Micro USB cable + Power Adaptor ack
-Cradle Charging + DC Power Cable + Power Adaptor ack
Started Z-2242 / Z-2240
Power On Z-2242 / Z-2240
Press and release the power button
LED blinks in red indicating low and risk battery and stating red indicating that
the battery is charging. The LED becomes green when battery is fully charged,
then.
Not :
Device turns to the modes as below by pressing power button key.
Susp nd Mod
Press and release the power button to place the Z-2242 / Z-2240 in suspend mode. In suspend
mode the device turns off the display and goes into a low power state to conserve battery power.
Pow r Off
To Power off the Z-2242 / Z-2240, press and hold the button until the device option dialog box
appears, choose “Pow r off”. When the Power off dialog box appears, tap “OK”.
R s t
Reset the Z-2242 / Z-2240 if application stop responding. Press and hold the power button until
the device options dialog box appears then touch Reset.
Hardwar R s t
If the Z-2242 / Z-2240 stop responding, perform a hardware reset by long press power button.
Data Captur
Scan a Bar Code with Imager
1. Switch on the barcode
Go to “S ttings” find Barcode Scan Slide Barcode Scan to “ON”
S ttings
Otros manuales para Z-2242
1
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
