ZappBug Room Manual de usuario
The ZappBug®Room
User Manual
V3.04.22
KEEP OUT OF REACH OF CHILDREN
Manufactured For:
ZAPPBUG
1700 WESTLAKE AVE N STE 200
SEATTLE WA 98109
EPA Est. No. 101830-CHN-1
MADE IN CHINA
Box 1 of 2: Net Weight: 52 lbs (23.5 kg)
Box 2 of 2: Net Weight: 39.6 lbs (18 kg)
©2014-2022 ZappBug. All rights reserved. Product specications subject to change. 2
This page is intentionally left blank
3
Table of Contents
Important Safety Information....................................................4
IMPORTANT Physical or Chemical Hazards............................5
Hints & Tips...................................................................................7
Components Included..............................................................8
Directions for Use........................................................................10
1. ZappBug Room Assembly................................................................10
2. Connect All Four ZappBug Thermal Units......................................13
3. Connect Recirculation Fan to Room Frame.................................13
4. Zip the Room Closed........................................................................14
5. Wireless Thermometer Set Up..........................................................14
6. Turn on ZappBug Thermal Units.......................................................17
7. Insert Items for Heat Treatment.......................................................18
8. Run Time.............................................................................................19
9. Remove Items After Heat Treatment..............................................19
10. Folding and Storing the ZappBug Room .....................................19
Heat Treatment Chart.....................................................................20
Troubleshooting..........................................................................21
Warranty Information................................................................23
©2014-2022 ZappBug. All rights reserved. Product specications subject to change. 4
Important Safety Information
You must comply with all safety information and operating
instructions when using this product. Please read all Safety and
Hazard Information outlined in this manual.
Failure to comply could result in personal injury, damage to
property, or re hazards.
5
PHYSICAL OR CHEMICAL HAZARDS
Power outlets with poor electrical connections can become dangerously
overheated and may result in severe injury, damage to property, or re.
High-power appliances require more electric current than most household items.
Old or high-use outlets can have poor or loose connections. The high current
required by this product, combined with a poor electrical connection can cause
outlets to overheat and melt. It is important to make sure that any outlets used
with this product have strong electrical contact.
Follow the steps below for safe use of ANY high-power appliances:
1. Inspect outlet connection and contact strength.
Insert a standard, two-prong plug (without ground connection) into
the outlet. Ensure that both prong connections offer strong and equal
resistance when inserted. If the two-prong plug does not offer strong
resistance or one prong feels easier to insert than the other, this outlet
could be unsafe for high-power appliances. Have an electrician
inspect and/or replace the outlet before use.
2. Ensure that the outlet is no older than 15 years.
3. If you are unsure about an outlet, have an electrician inspect and/or
replace the outlet.
4. Inspect outlets and plugs after each use.
Read This IMPORTANT!
SAFETY AND HAZARD
INORMATION Before
Proceeding
IMPORTANT SAFETY AND HAZARD INORMATION
©2014-2022 ZappBug. All rights reserved. Product specications subject to change. 6
IMPORTANT: Extension Cords
Some extension cords are not adequate to carry the load of current drawn by
this ZappBug thermal unit without becoming dangerously overheated. If an
extension cord must be used, do not use a cord rated less than 1500 watts or 15
amps, and of a minimum size of 16 gauge. Only use an extension cord with the
UL seal. Use of an inadequate extension cord may result in overheating of the
extension cord or re.
IMPORTANT: Old Electrical Wiring and Outlets
Each ZappBug thermal unit will draw 12-15 amps of current (1500 Watts) and
must be run on circuits rated 15 amps and above only. Some old electrical
wiring and outlets may not be capable of sustaining these loads. If you are
unsure of the electrical wiring or outlets in your location, contact an electrician
before operating ZappBug or any other high-current products. Old or faulty
electrical wiring could lead to damage, injury, or re. If an electrical cord
appears deformed or feels hot to the touch, unplug it immediately and contact
ZappBug customer service.
Additional Safety Information
• Failure to comply with the safety information presented by this manual may
result in severe injury and/or damage to property.
• Incorrect assembly or improper use may result in hazardous conditions.
Only assemble the ZappBug Room according to instructions in this manual.
• Do not block air intake or exhaust vents on the ZappBug thermal unit.
Obstructions of the intakeor exhaust vents can cause the ZappBug thermal
unit to overheat and pose a re hazard. Always maintain 6 or more inches
of clearance around the ZappBug thermal unit during operation.
• Do not use outside or in a wet environment. This product is designed for in-
door use only.
• Do not reach into or insert objects into ventilation fan while the ZappBug
thermal unit is running. This may result in personal injury or damage to the
ZappBug thermal unit.
• Do not place ammable objects or aerosols inside the ZappBug Room.
• Some items may be damaged during heat treatment. Use care when
heat treating fragile items made of materials such as antique leather
and wood.
• Consult the manufacturer of items in question, such as electronics, for a
maximum safe temperature before placing them in the ZappBug Room.
Always monitor the temperature to ensure that it does not exceed the
recommended level.
7
Hints & Tips
BED BUGS
• Researchers have found that bed bugs at all life stages die quickly at
temperatures at or above 120°F.
• Bed bug eggs are nearly translucent and incredibly difcult to detect.
• A best practice is to heat treat all items that may have been in the vicinity
of bed bugs even if no bed bugs are found.
• Bed bugs can survive for up to 18 months without feeding. It is critical that
all potentially infested items are heat treated or, alternatively, sealed and
stored for 18 months.
• Bed bugs can atten their bodies and slip into tiny cracks.
• Bed bugs are unable to climb smooth, nonporous surfaces like the lining of
the ZappBug Room.
THE ZAPPBUG ROOM
• Always use provided support blocks and/or net to ensure maximum air
circulation around your belongings. If your belongings are densely packed
together it will take signicantly more time for them to reach bed bug
killing temperatures.
• Make sure to turn the ZappBug thermal unit on before placing potentially
infested items inside the ZappBug Room.
• Only use indoors with an ambient room temperature at or above 70°F. The
ZappBug thermal unit works by adding heat to the air from the room in
which it is located. If the ambient temperature is below 70°F, the ZappBug
Room may not reach bed bug killing temperatures.
• Always monitor the temperature inside the ZappBug Room with the
thermometer and thermometer probe provided.
• Do not place the ZappBug Room directly on cold oors such as
concrete. Always place the ZappBug Room on surfaces at or above 70°F.
©2014-2022 ZappBug. All rights reserved. Product speci cations subject to change. 8
Tent Carry Bag ZappBug Thermal Unit with
Integrated Timer
Tent Frame Wireless Thermometer
and Three Probes
X1
X1 X4
X1
Components Included
The following components are required for proper use of this product. If you did
not receive all of the components listed below, contact ZappBug immediately
by phone at (206)-430-5514 or by e-mail at [email protected].
Note: Some components may appear different from the representations below.
9
Room Tent
Recirculation Fan
Accessory Carry Bag
Extension Cord
X1
X1
X1
X3
Support Block
X4
©2014-2022 ZappBug. All rights reserved. Product specications subject to change. 10
Use & Operation
1. ZappBug Room Assembly
Unfold The ZappBug Room with Quilted Side Down
Unzip All Five Zipper Pulls
Otros manuales para Room
1
Tabla de contenidos
Otros manuales de Equipo de control de insectos de ZappBug
Manuales populares de Equipo de control de insectos de otras marcas
Olimpia electronics
Olimpia electronics RT-52/HACCP Manual de usuario
MistAway
MistAway GEN III Manual
One Stop Gardens
One Stop Gardens SOLAR INSECT KILLER 95500 Guía de referencia rápida
Dynamic
Dynamic Dynatrap XL Manual de usuario
Stinger
Stinger BKC40 Series Manual de uso y cuidado
Agrimate
Agrimate AF-4000NK-VM Manual de usuario