Zanussi 1800 Manual de instrucciones
ZANUSSI
P R O F E S S I O N A L
WORK TABLES WITH BOWL
1400&1800 mm
Model 132200+855300
Net weight - kg. 45 45 54 54
Bowl dimensions (wxdxh) - mm 400x400xH200 400x400xH200 400x400xH200 400x400xH200
Bowls - n. 1 1 1 1
radius R=8 R=8 R=8 R=8
depth 13 13 13 13
height 100 100 100 100
Upstand dimensions - mm
Worktop thickness - mm 50 50 50 50
height 1000 1000 1000 1000
depth 700 700 700 700
width 1400 1400 1800 1800
External dimensions - mm
TL1410DXP
132300
TL1410SXP
132301
TL1810DXP
132306
TL1810SXP
132307
CHARACTERISTICS MODELS
TECHNICAL DATA
RANGE
COMPOSITION
The range consists of 4 models of
work tables with upstand and a bowl
positioned on the right or left hand
side, 1400 or 1800 mm in length.
The highly modular design of the
tables guarantees a rational solution
to any food preparation or support
function in the professional kitchen.
Upstand with 8 mm radioused
corner, 100 mm high and 13 mm
deep, designed to be used against a
wall.
FUNCTIONAL AND
CONSTRUCTION
FEATURES
� The 40 mm high worktop in 304
AISI stainless steel, 10/10 in
thickness, incorporates a layer of
sound deadening material, has
upturned edges to protect the
kitchen worker and a reinforced,
waterproof under panel.
� Square section legs and 1"
height-adjustable feet (40 mm) in
304 AISI stainless steel to allow
perfect alignment with other food
preparation equipment.
� The single-pressed bowl (400 x
400 x 200 mm) is supplied as
standard with an overflow pipe and
drain hole.
� Ease and speed of installation
guaranteed by the fact that the table
top slots into the legs without using
screws.
� All work tables can be fitted, as
optional extras, with a single drawer
either 400 or 600 mm wide, a chest
of 4 drawers either 400 or 600 mm
wide, a lower shelf, a three sided
underframe and a set of castors as
an alternative to the feet. Different
taps are avialable to suit every need.
� The drawers, in 304 AISI stainless
steel with a one-piece interior and
rounded corners for greater hygiene
and ease of cleaning, are designed
to contain GN containers with a
maximum height of 100 mm. They
have a maximum load capacity of 40
kg.
� The lower shelf, 40 mm in
thickness, slots easily into place,
without the use of tools, at a height
of 200 mm from the floor. Smooth
shelves are normally supplied,
perforated ones are available on
request. For installation of the chest
of drawers the lower shelf must be
ordered as well.
� All models comply with the more
strict international standards as far
as hygiene and cleanability are
concerned.
AAAD1 2010-05-28 The Company reserves the right to alter technical specifications without prior notice.
www.zanussiprofessional.com
ZANUSSI
P R O F E S S I O N A L
WALL MIXER TAP WITH SWIVEL SPOUT 3/4" 855310 855310 855310 855310
SINGLE PLASTIC DRAIN SYPHON 1,5" 855306 855306 855306 855306
SINGLE BRASS DRAIN SYPHON 1,5" 855308 855308 855308 855308
PRE-WASH SPRAY UNIT,SINGLE HOLE 855315 855315 855315 855315
MIXER TAP(PREMIUM)+SPRAY ARM-3/4" HOLE 855326 855326 855326 855326
MIXER TAP(INFRARED)+SPOUT 3/4"SING.HOLE 855325 855325 855325 855325
MIXER TAP WITH SPOUT 3/4" SINGLE HOLE 855319 855319 855319 855319
MIXER TAP W/FOOT PEDAL FOR SINKS ON LEGS 855317 855317 855317 855317
LOWER SHELF FOR 1800 MM TABLES 855018 855018
LOWER SHELF FOR 1400 MM TABLES 855014 855014
FOOT OP.MIXER TAP(HOT+COLD)+SPOUT-3/4" 855328 855328 855328 855328
ELBOW OP.MIX.TAP+SHORT SPOUT-3/4" HOLE 855323 855323 855323 855323
DRAWER (S/S RUNNERS) GN 1/1 400 MM 855810 855810 855810 855810
DRAWER (S/S RUNNERS) 600 MM 855811 855811 855811 855811
DRAWER (GALVANIZED RUNNERS) GN 1/1 400MM 855902 855902 855902 855902
DRAWER (GALVANIZED RUNNERS) 600 MM 855903 855903 855903 855903
CHEST 4 DRAWERS(S/S RUNNERS) GN1/1 400MM 855812 855812 855812 855812
CHEST 4 DRAWERS (S/S RUNNERS) 600 MM 855813 855813 855813 855813
3-SIDED UNDERFRAME FOR 1800 MM TABLES 855048 855048
3-SIDED UNDERFRAME FOR 1400 MM TABLES 855044 855044
TL1410DXP
132300
TL1410SXP
132301
TL1810DXP
132306
TL1810SXP
132307
ACCESSORIES MODELS
OPTIONAL ACCESSORIES
HWI - Hot water inlet 3/4" 3/4" 3/4" 3/4"
D - Water drain 1"1/2 1"1/2 1"1/2 1"1/2
CWI - Cold water inlet 3/4" 3/4" 3/4" 3/4"
TL1410DXP
132300
TL1410SXP
132301
TL1810DXP
132306
TL1810SXP
132307
LEGEND
132300 132301
132306 132307
Este manual sirve para los siguientes modelos
8
Otros manuales de Mesa de preparación de alimentos de Zanussi
