Z3 Technology Z3-MVE-20 Manual de usuario

Page 1

Z3 Technology

User’s Manual

Dual Channel HD H.264 Encoder

Model Name: Z3-MVE-20

Version 1.0.4

November 2, 2011

Before attempting to connect or operate this product, please read

these instructions carefully and save the manual for future use.

Z3 Technology

Tel: +1.402.323.0702

www.z3technology.com

[email protected]

Page 2

Revision History

Version

Date

Change Note

Author

1.2.2

8/29/11

Original System

1.2.6

9/1/11

Firmware Upgrade

1.3.1

11/2/11

Firmware Upgrade, Edited Images

1.0.4

2/13/12

Associated version number with software release version. Added

Troubleshooting section

Page 3

TABLE OF CONTENTS

PAGE #

1.0 GENERAL INFORMATION………………………………………………………………..….4

1.1 Preface……………………………………………………………………………….......4

1.2 About the Manual………………………………………………………………………..4

2.0 PARTS LIST…………………………………………………………………………………….5

2.1 Included Parts……………………………………………………………………………5

2.2 Optional Accessories……………………………………………………………………5

3.0 FEATURES……………………………………………………………………………………..6

4.0 OPERATING CONTROLS…………………………………………………………………….7

4.1 Front View………………………………………………………………………………..7

4.2 Rear View………………………………………………………………………………..7

5.0 SYSTEM CONNECTIONS…………………………………………………………………….8

5.1 PC Setup………………………………………………………………………………....8

5.2 Web Server - Encoder………………….………………………………………………9

5.3 IP Settings –Encoder…………………………………………………………………10

5.4 Encoder Configuration Options…..…………………………………………………..11

5.5 Web Server –Decoder………..………………………………………………………12

5.6 IP Settings –Decoder…………………………………………………………………12

5.7 Decoder Configuration Options………………………………………………………13

6.0 STREAMING OPERATION………………………………………………………………….14

6.1 Transport Stream (TS)………………………………………………………………...14

6.2 Real-Time Transport Protocol (RTP)……………………………...........................14

7.0 APPENDIX A: SERIAL CONTROL…………………………………………………………15

7.1 Terminal Output…….………………………………………………………………….15

7.2 System Menu Control…………………………………………………………………16

Page 4

1.0 GENERAL INFORMATION

1.1 Preface

The Z3-MVE-20 is a 1 RU rack-mount system capable of processing two channels, multi-format HD

video and integrated system peripherals. This system supports H.264 High Profile encode up to

1080p at 30 frames per second. The Z3-MVE-20 can be configured as a single-channel or dual-

channel encoder, where the latter offers the advantage of low power consumption and lower cost per

channel, compared to a PC system. The Z3-MVE-20 is a cost-effective system suitable for broadcast,

video security, satellite uplink, remote monitoring and industrial applications.

The Z3-MVE-20 features multiple I/O interfaces, such as HD-SDI, HDMI, composite, component, ASI

and Ethernet. Multiple interfaces allow customers to quickly integrate full H.264 1080p30 performance

into their network without the power consumption and physical space required of a PC-based platform.

1.2 About the Manual

Before attempting to connect or operate this product, please read these instructions carefully and

save this manual for future use.

Page 5

2.0 PARTS LIST

2.1 Included Parts

2.2 Optional Accessories

Page 6

3.0 FEATURES

The Z3-MVE-20 is a dual channel, high definition, low cost, network-enabled media encoder with the

following features:

Two identical and completely independent HD encoders

Each independent HD encoder supports:

Resolutions up to 1920x1080, including 1080i, 1080p30 and 720p60

H.264, MPEG-4, MPEG-2 video

Video and audio decoding

Standard Definition encoding for ISDB-T, DVB-H, and other standards

Video Inputs: SD/HD-SDI, HDMI/DVI, Component, Composite, VGA (Optional ASI input)

Video input resizer support 1/2, 2/3 and 3/4 of standard resolutions

Output Interfaces: Ethernet, ASI

Outputs RTP or MPEG-2 Transport Stream

USB interface for mass storage devices or other peripherals

SD Card interface for local storage and firmware updates

RS232 serial port for configuration and control

Web-based configuration software

Page 7

4.0 OPERATING CONTROLS

4.1 Front View

4.2 Rear View

Page 8

5.0 SYSTEM CONNECTIONS

The System can be controlled via the web server on the Z3-MVE-20. It can also be controlled via the

serial port.

5.1 PC Setup

Initially, the simplest way to setup the networked PC to communicate with the Z3-MVE-20 is to

put the PC on the same subnet as the Z3-MVE-20. The IP address of the Z3-MVE-20 can be found

by looking at the bottom side of the Z3-MVE-20. The Windows PC can be setup on the same subnet

by using these parameters:

Note: The static IP of the computer cannot be the same as the static IP of the Z3-MVE-20

Page 9

5.2 Web Server - Encoder

Note: If you use unicast on the encoder, you must also use unicast on the VLC receiver. If you

use multicast on the encoder, you must also use multicast on the VLC receiver.

1. Power on the Z3-MVE-20

2. Wait one minute or until LED #1 on the unit lights up

3. Connect the Ethernet cable from the Z3-MVE-20 unit directly to the PC

4. Disable all wireless and local area connections

5. For a client PC to access the Z3-MVE-20 factory default settings, set the IP address of the

PC to 192.168.x.XX

6. Open Firefox or Internet Explorer 8 (or above) as your web browser

7. Type the IP address of the Z3-MVE-20 in your web browser (http://192.168.XX.XX) and

the Z3-MVE-20 Encoder web configuration menu will appear

8. Configure the Z3-MVE-20 with your desired settings (See 5.3 Encoder Configuration

Options)

9. Press “Start Encoder” on the Encoder Control menu

Microsoft Windows users

1. Go to the Start Menu and select

Control Panel

2. Click on Network and Sharing Center

3. Click on View Status

4. Click on Properties.

5. Click Internet Protocol (TCP/IP) and

click Properties.

6. In the Internet Protocol (TCP/IP)

Properties window, select "Use the

following IP address" if not already

selected and specify the IP address

you wish to use. While entering this

data you'll also need to specify the

subnet mask and default gateway.

Linux users

The below information is for how to specify

and adjust your network settings through the

command prompt. Changing your network

settings will require root access.

1. Get to the command prompt.

2. Move to the /etc/sysconfig/network

directory.

3. Edit the interfaces file and adjust your

network settings in this file.

Page 10

5.3 IP Settings - Encoder

1. Press “Stop Encoder” on the Encoder Control menu

2. Once the encoder has stopped, type in your desired IP settings

3. Hit “Save User” to save your desired settings

4. Power cycle the Z3-MVE-20

5. The new IP settings will now take effect

Otros manuales para Z3-MVE-20

Tabla de contenidos

Otros manuales de Convertidor de medios de Z3 Technology

Z3 Technology

Z3 Technology Z3-DME-04 Manual de usuario

Z3 Technology

Z3 Technology Z3-DM816X-PCI2-RPS Manual de instrucciones

Z3 Technology

Z3 Technology HE4K-DCK-RPS Manual de usuario

Z3 Technology

Z3 Technology ZCube-SC Manual de usuario

Z3 Technology

Z3 Technology HE4K-DCK-1X Manual de usuario

Z3 Technology

Z3 Technology Z3-HE1080-RPS Manual de usuario

Z3 Technology

Z3 Technology Z3-MVE-20 Manual de usuario

Z3 Technology

Z3 Technology Z3-HE4K-01 Manual de usuario

Z3 Technology

Z3 Technology HE4K-DCK-RPS Manual de usuario

Z3 Technology

Z3 Technology Z3-DME-01 Manual de usuario

Z3 Technology

Z3 Technology Z3-DME-01 Manual de usuario

Z3 Technology

Z3 Technology Z3-MVE-40 Manual de usuario

Z3 Technology

Z3 Technology Z3Stream-01 Manual de usuario

Z3 Technology

Z3 Technology DME-01 Manual de usuario

Z3 Technology

Z3 Technology Z3-MVE-250 Manual de usuario

Z3 Technology

Z3 Technology Z3-HE4K-01 Manual de usuario

Z3 Technology

Z3 Technology Z3-SBE264-DVR-23 Manual de usuario

Z3 Technology

Z3 Technology Z3-HE4K-01 Manual de usuario

Z3 Technology

Z3 Technology ZEUS DME-10-G Manual de usuario

Z3 Technology

Z3 Technology Z3-MVE-20 Manual de usuario

Z3 Technology

Z3 Technology DMD-10J Manual de usuario

Z3 Technology

Z3 Technology HE4K-DCK-1X Manual de usuario

Z3 Technology

Z3 Technology MVE-20 Manual de usuario

Z3 Technology

Z3 Technology BLD265-SC2 Manual de usuario

Manuales populares de Convertidor de medios de otras marcas

SoundTraxx

SoundTraxx Blunami BLU-2200 Manual de usuario

SPROLINK

SPROLINK VA1 Manual de usuario

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manual de usuario

Nikon

Nikon AF-S TC-20E III Manual de usuario

Axis

Axis AXIS Q7406 Manual de usuario

Omega

Omega TAC80B-J Manual de usuario

Zoom

Zoom Thunderbolt TAC-2R Manual de usuario

OST

OST iConverter 10/100M Manual de usuario

Vertiv

Vertiv Netsure Manual de usuario

birddog

birddog MINI Manual de usuario

Roland

Roland GI-10 Manual de usuario

Wallenstein

Wallenstein WX310 Manual de usuario

Pace

Pace MSS 200-1 Manual de usuario

Solar Converters

Solar Converters EQ 12/24-50 Manual de usuario

CYP

CYP EL-7400V Manual de usuario

TIE

TIE MIDI 1i1o Manual de usuario

DCS

DCS Vivaldi Upsampler Manual de usuario

Westermo

Westermo MCW-211 SERIES Manual de usuario