Young Electric E-SCOUT Manual de usuario
0
Owner’s Manual
E-SCOUT
1
Table of Contents
ABOUT THIS MANUAL............................................................................................................. 2
YOUNG ELECTRIC BICYCLE OVERVIEW…..................................................................................3
SPECIFICATIONS….....................................................................................................................4
SAFETY PRECAUTIONS............................................................................................................. 5
ASSEMBLLY INSTRUCTIONS….............................................................................................. 6-18
BATTERY CHARGING & STORAGE…................................................................................... 19-22
PRE-RIDING CHECK…..........................................................................................................23-25
HMI CONTROL….................................................................................................................26-28
MAINTANCE….................................................................................................................... 29-33
SERVICE PARTS....................................................................................................................34-35
LIMITED WARRANTY...........................................................................................................36-38
2
YOUNG ELECTRIC is not liable for accidentsor injuries due to improperuse of the product,failureto adhere
to theinstructions given in this guide,or modifications to the product. While every effort has been made
to ensure that the information contained in the guide is accurate and complete, YOUNG ELECTRIC is not
liable for any errors or omissions.
THANK YOU FOR CHOOSING A YOUNG ELECTRIC BICYCLE !
YOUNGELECTRICbikes are designed tomake your ridingexperiencea pleasure. Carefully read this
Owner’s Manualbefore assembly and first ride. It will give you all the information necessary for
assembly, adjusting, and maintenance of your bike.
YOUNGELECTRICworkshard to guarantee you a bicycle thatisproperlyassembled and correctly adjusted
when itleavesourfactory. Please contact our Help Center if you still have questions about your new
bikeafter reading this manual. Our customer service staff will work to answer questions regarding
assembly, performance, operation,service parts or general service.
Email: cservice.fus@youngelectricbikes.com
About this Manual:
Keep this Owner’s Manual in a safe place for future reference. All content in this manual is subject
to change as we continually work to refine our products.
This manual contains warnings, cautions, and notes for your safety. Carefully read all of this
information and share with others that may ride this bike before attempting to operate the bike for
the first time. Give special attention to any information that has a warning or caution symbol before
or next to it. Also pay attention to any information preceded by NOTICE as this will be important
information that may not be related to safety.
Always properly maintain and care for your bicycle so original quality and safety are retained.
Maintenance, adjusting and repairs
To reduce the risk of accidents and injury, regularly inspect your bicycle and have it repaired at our
authorized distributors or after sales service shop. Assembly and adjustment of this bike may
require special tools and skills. It is recommended that assembly and adjustment of this bike be
completed by a certified, reputable bike mechanic if possible.
All users must read and understand this manual before riding their bike from A YOUNG ELECTRIC Bike.
Additional manuals for components used on the bike may also be provided and should be read
before installing or using those components.
3
OVERVIEW
A
Grip
H
Headlight
O
Rear Wheel
V
Rear Hub Motor
B
Shift Lever
I
Suspension Fork
P
Rear Disc Brake
W
Front Fender
C
HMI Display
J
Front Wheel
Q
Front Disc Brake
X
Rear Fender
D
Remoter
K
Frame
R
Pedal
Y
Rear Rack
E
Throttle
L
Saddle
S
Crank Set
Z
Reflector
F
Brake Lever
M
Seat Post Clamp
T
Rear Derailleur
G
Handlebar
N
Seat Post
U
Kickstand
4
SPECIFICATIONS
Model Name
YOUNG ELECTRIC E-Scout
Max. Load Capacity
300Ibs./136kg
Max. Speed
28MPH
Motor
48V 750W Brushless Hub Motor
Battery
48V 15AH (720Wh) Li-ion
Light
Front
Wheel Size
26’’X4.0’’ Front/Rear
Tire Pressure
5-30 P.S.I. (0.4-2.1 BAR ; 40-210 KPA)
Charger
48V 2Ah
Charging Time
Approx.6-7 Hours
Water Resistance
IPX4
Weight
74lbs/33.3kg
5
SAFETY PRECAUTIONS
The following safety signal words indicate the following information is a safety message. The
symbols are to alert you to potential hazards. Failure to pay attention to the safety message may result
in property damage, injury or death. This manual contains many WARNING and CAUTION messages
related to safety and the potential hazard. It also contains NOTICE messages that information the
user should pay special attention to.
Indicates a hazard or unsafe practice that can result in severe injury or death if the user fails to read,
understand and follow the safety information in this manual.
Indicates a hazard or unsafe condition that could result in minor injury if the user fails to read,
understand and follow the safety information.
Indicates information that the user should pay special attention to but is not related to physical injury.
Always carry out a complete check before riding. Thoroughly read the safety section.
Electric Bicycles can be dangerous to use. The user or consumer assumes all risk of personal injuries,
damage,or failure of the bicycle or system and all other losses or damages to themselves and others and
to any property arising as a result of using the electric bicycle.
Never disassemble, modify or replace electrical parts.
Always wear an approved helmets when you are riding to protect your head in a fall. It is your
responsibility to familiarize yourself with the laws of where you ride your YOUNG ELECTRIC bicycle and
comply with all applicable laws.
If you are riding at night or in bad weather
Wear reflective and bright color clothing and/or a reflective vest. Check your bicycle headlight and
white reflector are in place and function properly. Check your rear red reflectors and wheels
reflectors are also in place.
Extra precautions must be taken if you will be riding your bike in the rain. Braking distances
increase during rain, visibility and tire traction are reduced. Allow extra stopping distance and take
extra caution in the rain and on wet surfaces. Avoid riding the bike on ice and in snow.
Access to pathways, responsible riding and code of good riding.
Do not consider access to pathways guaranteed. Your behavior on your next ride will influence
accessibility to pathways in the years to come. Limit skidding, avoid muddy areas and remain
courteous to walkers and horse riders.
All frames and components should be checked regularly Inspect for signs of wear and/or essential
breakage (cracks, corrosion, breaks). These are important safety verifications to avoid accidents, body
injuries and that your bike continues to last and give you pleasure.
6
13
ASSEMBLY INSTRUCTIONS
YOUNG ELECTRIC Bicycle Assembly Checklist
1
E-Bike
4
Right Pedal
7
Charger
10
Headlight
13
Owner’s
Manual
2
Kickstand
5
Tools kit
8
Cable
11
Accessory Box
3
Left Pedal
6
Key x 2
9
Quick
Release Lever
12
Master Carton
7
YOUNG ELECTRIC Bicycle Assembly Guide
The following assembly information is only a general guide to assist during the assembly of YOUNG
ELECTRIC bikes. It is not a complete or comprehensive manual of all aspects of the bike assembly,
maintenance, and repair. Consult a certified bike mechanic to assist with the assembly, adjustment,
repair, and maintenance of YOUNG ELECTRIC bikes.
Step 1: ATTACH THE KICKSTAND
Open shipping carton and carefully remove your bike from the bottom tray. Kickstand come with 2
bolts. Remove 2 bolts from kickstand with M4 hex key. Position the kickstand under the bike. Thread
the bolt with your fingers into the threaded hole in the kickstand and tighten it with M4 hex key .
Step ❶
8
Step 2:PREPARE TO ATTACH THE FRONT WHEEL
Gently place it on a soft surface to prevent scratches during assembly.
Remove all zip ties and inside protective covers or packing materials. (scissors not included)
Step 3: ATTACH THE FRONT WHEEL
Step ❷
Remove the front axle bolt and shipping bracket from front fork. Remove plastic caps from front
wheel hub. Insert the front wheel into the fork dropouts. Make sure the brake disc is centered in
the caliper to avoid damage. Insert the quick release axle bolt into the front wheel hub and tighten.
Do not over tighten the quick release and do not use any tools to increase leverage, close it firmly by
hand. There should be no play in the front wheel.
All quick-release levers should be inspected before every ride to be sure they are fully closed and
secure. Failure to properly close a quick-release lever can cause loss of control of the bicycle resulting
in injury or death. Make sure the wheel is properly seated and the quick-release lever is properly
closed.
Assembly explosion diagram
Outer spring
Inner spring
Adjustment
Skewer
Quick-release
9
Installation guide
① Remove plastic caps from front wheel hub.
② Unscrew the adjustment nut from the skewer, remove outer spring and slide the skewer through
the front wheel axle so the quick-release lever is on the same side of the chain.
③ Begin to thread the adjustment nut back onto the skewer, but do not tighten too far. Allow
enough play so you can place the axle into the fork drop out.
④ Slide the wheel into the fork dropout slots. Insert the disc rotor into the center of the disc brake
at the same time you are inserting the wheel axle into the fork drop out.
⑤ Move the quick-release lever into the open position. With one hand on the quick-release lever
and one hand on the adjustment nut, start to hand tighten the adjustment nut until you start to
feel some resistance against the fork.
⑥Try to close the quick-release lever. If it closes easily, open it up and tighten the adjustment nut
further. If it is too difficult to close, open the quick- release lever up and loosen the adjustment
nut a little and try again. Do not attempt to tighten by turning the quick-release lever. The quick-
release lever is for closing, the adjustment nut is for adjusting the tension.
①
②
③
④ ⑤
Tabla de contenidos
Otros manuales de Bicicleta de Young Electric
