York THGD18 THRU 60 Guía de inicio rápido

TECHNICAL GUIDE

SPLIT-SYSTEM

HEAT PUMPS

13 SEER – R-410A

MODELS:

THGD18 THRU 60

(1.5 THRU 5 NOMINAL TONS, 1 PHASE)

Due to continuous product improvement, specifications

are subject to change without notice.

isit us on the web at www.york.com

dditional rating information can be found at

ww.ahridirectory.org

LISTED

ISO 9001

Certified Quality

Management System

397763-YTG-B-0508

FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE

DESCRIPTION

The heat pump condensing unit is the outdoor part of a versa-

tile system of heating and air conditioning. It is designed to be

custom-matched with one of UPG’s complete line of evapora-

tor sections, with each serving a specific function. Matching

Air Handlers are available for upflow, downflow, or horizontal

applications to provide a complete system. Electric Heaters

are available, if required. Add-on coils are available for use

with upflow, downflow, or horizontal furnaces and air han-

dlers.

WARRANTY

Single Phase Units:

5-year limited parts warranty.

5-year limited compressor warranty.

FEATURES

•QUALITY CONDENSER COILS - The coil is constructed

of copper tubing and enhanced aluminum fins for

increased efficiency and corrosion protection.

•PROTECTED COMPRESSOR - The compressor is inter-

nally protected against high pressure, temperature, and

externally by a factory installed high pressure switch. This

is accomplished by the simultaneous operation of high

pressure relief valve and a temperature sensor which pro-

tects the compressor if undesirable operating conditions

occur. A liquid line filter-drier further protects the compres-

sor.

•DURABLE FINISH - The cabinet is made of pre-painted

steel. The pre-treated galvanized steel provides a better

paint to steel bond, which resists corrosion and rust creep.

Special primer formulas and matted-textured finish insure

less fading when exposed to sunlight.

•LOWER INSTALLED COST - Installation time and costs

are reduced by easy power and control wiring connec-

tions. Available in sweat connect models only. The unit

contains enough refrigerant for matching indoor coils and

15 feet of interconnecting piping. The small base dimen-

sion means less space is required on the ground or roof.

•TOP DISCHARGE - The warm air from the top mounted

fan is blown up away from the structure and any landscap-

ing. This allows compact location on multi-unit applica-

tions.

•LOW OPERATING SOUND LEVEL - The upward air flow

carries the normal operating noise away from the living

area. The rigid top panel effectively isolates any motor

sound. Isolator mounted compressor and the rippled fins

of the condenser coil muffle the normal fan motor and

compressor operating sounds.

•LOW MAINTENANCE - Long life permanently lubricated

motor-bearings need no annual servicing.

•EASY SERVICE ACCESS - Fully exposed refrigerant con-

nections, and a single panel covering the electrical con-

trols make for easy servicing of the unit.

•SECURED SERVICE VALVES - Secured re-usable ser-

vice valves are provided on both the liquid and vapor

sweat connections for ease of evacuating and charging.

•U.L. and C.U.L. listed - approved for outdoor application.

Certified in accordance with the Unitary Small Equipment cer-

tification program, which is based on ARI Standard 210/240.

397763-YTG-B-0508

2Johnson Controls Unitary Products

All dimensions are in inches. They are subject to change

without notice. Certified dimensions will be provided upon

request.

Physical and Electrical Data

MODEL THGD18

S41S1 THGD24

S41S1 THGD30

S41S1 THGD36

S41S1 THGD42

S41S1 THGD48

S41S1 THGD60

S41S1

Unit Supply Voltage 208-230V, 1φ, 60Hz

Normal Voltage Range 1187 to 252

Minimum Circuit Ampacity 9.6 12.0 15.4 19.6 28.6 30.9 37.4

Max. Overcurrent Device Amps 215 20 25 30 50 50 60

Min. Overcurrent Device Amps 315 15 20 20 30 35 40

Compressor Type Recip Recip Recip Recip Scroll Scroll Scroll

Compressor Amps Rated Load 7.12 8.9 11.65 14.72 21.76 23.61 28.79

Locked Rotor 47.0 48.0 60.0 83.0 105.0 150.0 150

Crankcase Heater Yes Yes Yes Yes No No No

Fan Motor Amps Rated Load 0.70 0.80 0.80 1.5 1.5 1.5 1.5

Fan Diameter Inches 24 24 24 24 24 24 24

Fan Motor Rated HP 1/10 1/8 1/8 1/4 1/4 1/4 1/4

Nominal RPM 825 1075 1075 850 850 850 850

Nominal CFM 2200 2900 3100 3800 3200 3000 3000

Coil Face Area Sq. Ft. 15.7 18.3 21.0 23.58 23.58 23.58 23.58

Rows Deep 1 1 1 1 1 2 2

Fin / Inches 22 22 22 22 22 18 18

Liquid Line Set OD (Field Installed) 3/8 3/8 3/8 3/8 3/8 3/8 3/8

Vapor Line Set OD (Field Installed) 3/4 3/4 3/4 3/4 7/8 7/8 7/8

Unit Charge (Lbs. - Oz.) 46 - 5 8 - 7 9 - 12 9 - 15 9 - 12 13 - 9 13 - 6

Charge Per Foot, Oz. .62 .62 .62 .62 .67 .67 .67

Operating Weight Lbs. 172 184 196 208 208 275 280

1. Rated in accordance with ARI Standard 110, utilization range “A”.

2. Dual element fuses or HACR circuit breaker. Maximum allowable overcurrent protection.

3. Dual element fuses or HACR circuit breaker. Minimum recommended overcurrent protection.

4. The Unit Charge is correct for the outdoor unit, matched indoor coil and 15 feet of refrigerant tubing. For tubing lengths other than 15 feet,

add or subtract the amount of refrigerant, using the difference in length multiplied by the per foot value.

Unit

Model

Dimensions

(Inches) Refrigerant Connection

Service Valve Size

1. Including Fan Guard.

B C Liquid Vapor

18 28 34 34

3/8”

3/4”

24 32 34 34

30 36 34 34

36 40 34 34

42 40 34 34 7/8”48 40 34 34

60 40 34 34

397763-YTG-B-0508

Johnson Controls Unitary Products 3

PROCEDURES:

1. Unit factory charge listed on the unit nameplate includes refrigerant for the condenser, the smallest evaporator and 15 feet of interconnect-

ing line tubing.

2. Verify the TXV or orifice and additional charge required for specific evaporator coil in the system using the above table.

3. Additional charge for the amount of interconnecting line tubing greater than 15 feet at the rate specified in Physical and Electrical Data

Table.

4. For TXV match charge weight needs to be weighed in for specififc coil match and lineset length.

5. Permanently mark the unit nameplate with the total system charge. Total System Charge = Base Charge (as shipped) + adder for evapo-

rator + adder for line set.

Additional R-410A Charge / Orifice Size for Various Matched Systems

Outdoor Unit THGD18

S41S1 THGD24

S41S1 THGD30

S41S1 THGD36

S41S1 THGD42

S41S1 THGD48

S41S1 THGD60

S41S1

Required Orifice or TXV 1,2 1TVM0901 1TVM0903 1TVM0903 1TVM0904 1TVM0904 1TVM0905 1TVM0906

Factory Charge, lbs-oz 6 - 5 8 - 7 9 - 12 9 - 15 9 - 12 13 - 9 13 - 6

Indoor Coil3,4 Additional Charge, Oz

FC/MC/PC/UC18AB 0––––––

FC/MC/PC/UC24AB +40–––––

FC/MC/PC30AB –0–––––

FC/MC/PC32A –00––––

FC/MC/PC35BC –00––––

FC/MC/PC37A ––00–––

FC/MC/PC43BC ––00–––

FC/MC/PC/UC48CD – – – + 10 0 0 –

FC/MC/PC/UC60CD ––––00–

FC/MC62D –––––+120

HC18A +1––––––

HC30A +100–––––

HC36B –00––––

HC42 – – 0 0 0 – –

HC60 ––––00–

HD24 +14––––––

HD36 –+2–––––

HD48 – – + 8 + 8 – – –

HD60 ––––0+7–

AHP18 0––––––

AHP30 –0–––––

AHP36 ––00–––

AHP/SHP48 ––––00–

AHP/SHP60 –––––0–

AV24 +30–––––

AV36 – 6 0 0 – – –

AV/SV48 ––––00–

AV/SV60 –––––0–

F4FP24 0––––––

F4FP30 –0–––––

F4FP40 ––0––––

F4FP45 –––00––

F5FP48 ––––00–

F4FV60 –––––0–

F5FP60 –––––0–

FOOTNOTES:

1. For applications requiring a TXV use 1TVM900 series kit.

2. Approved orifice shipped with outdoor unit.

3. Systems matched with furnace or air handlers not equipped with blower-off delays may require blower Time Delay Kit 2FD06700224.

4. PC coils cannot be used in downflow or horizontal applications. FC coils cannot be used in horizontal applications.

See Cautionbelow

F*FP Air Handlers come with a factory installed R-22 TXV which MUST BE CHANGED OUT to R-410A TXV or an orifice for proper opera-

tion. If the TXV is not changed out system damage will occur.

397763-YTG-B-0508

4Johnson Controls Unitary Products

COOLING CAPACITY - With Air Handler Coils

UNIT

MODEL

AIR HANDLER COIL

MODEL1

COOLING

MODEL W RATED

CFM NET MBH SEER EER

TOTAL SENS.

13 SEER HP WITH MA

THGD18S41S1 MA08B 17 FC/MC/PC18B 600 17.0 12.6 13.00 11.00

MA08B 17 FC/MC/PC24B 600 17.0 12.9 13.50 11.00

THGD24S41S1 MA08B 17 FC/MC/PC24B 800 23.0 17.1 13.00 11.00

MA08B 17 FC/MC/PC30B 800 23.0 17.2 13.00 11.00

MA08B 17 FC/MC/PC35B 800 23.0 17.5 13.00 11.00

THGD30S41S1 MA12B 17 FC/MC/PC35B 1000 29.0 23.2 13.00 11.00

MA12B 17 FC/MC/PC43B 1000 29.0 23.4 13.00 11.00

THGD36S41S1 MA12B 17 FC/MC/PC43B 1200 35.0 26.8 13.00 11.00

MA14D 24 FC/MC/PC48D 1200 35.0 27.0 13.00 11.00

THGD42S41S1

MA14D 24 FC/MC/PC48D 1400 41.5 31.4 13.00 11.00

MA16C 21 FC/MC/PC48C 1400 41.5 31.4 13.00 11.00

MA14D 24 FC/MC/PC60D 1400 41.0 31.2 13.00 11.00

MA16C 21 FC/MC/PC60C 1400 41.0 31.2 13.00 11.00

THGD48S41S1

MA16C 21 FC/MC/PC48C 1600 47.0 35.2 13.00 11.00

MA20D 24 FC/MC/PC48D 1600 47.0 35.2 13.00 11.00

MA16C 21 FC/MC/PC60C 1600 47.0 35.6 13.00 11.00

MA20D 24 FC/MC/PC60D 1600 47.0 35.6 13.00 11.00

MA20D 24 MC62D 1600 47.0 35.6 13.00 11.00

THGD60S41S1 MA20D 24 MC62D 1800 54.0 42.5 13.00 11.00

13 SEER HP WITH MV - VARIABLE SPEED

THGD18S41S1 MV12B 17 FC/MC/PC18B 600 17.0 12.9 14.00 12.00

MV12B 17 FC/MC/PC24B 600 17.0 13.2 14.00 12.00

THGD24S41S1

MV12B 17 FC/MC/PC24B 800 23.0 17.6 14.00 12.00

MV12B 17 FC/MC/PC30B 800 23.0 17.6 14.00 12.00

MV12B 17 FC/MC/PC35B 800 23.0 17.9 14.00 12.00

MV16C 21 FC/MC/PC35C 800 23.0 17.9 14.00 12.00

THGD30S41S1

MV12B 17 FC/MC/PC35B 1000 29.0 23.6 14.00 12.00

MV16C 21 FC/MC/PC35C 1000 29.0 23.6 14.00 12.00

MV12B 17 FC/MC/PC43B 1000 29.0 23.8 14.00 12.00

MV16C 21 FC/MC/PC43C 1000 29.0 24.0 14.00 12.00

THGD36S41S1

MV12B 17 FC/MC/PC43B 1200 35.0 27.0 13.50 11.50

MV16C 21 FC/MC/PC43C 1200 35.0 27.2 13.50 11.50

MV12D 24 FC/MC/PC48D 1150 35.0 26.8 13.50 11.50

MV16C 21 FC/MC/PC48C 1200 35.0 27.4 13.50 11.50

MV20D 24 FC/MC/PC48D 1200 35.0 27.4 13.50 11.50

THGD42S41S1 MV16C 21 FC/MC/PC48C 1400 42.0 31.8 14.00 12.00

MV20D 24 FC/MC/PC48D 1400 42.0 32.0 14.00 12.00

MV20D 24 FC/MC/PC60D 1400 41.5 31.8 14.00 12.00

THGD48S41S1

MV16C 21 FC/MC/PC48C 1600 47.5 35.6 14.00 11.80

MV20D 24 FC/MC/PC48D 1600 47.5 35.6 14.00 11.80

MV20D 24 FC/MC/PC60D 1600 47.5 36.0 14.00 11.80

MV20D 24 MC62D 1600 47.5 36.0 14.00 12.00

THGD60S41S1 MV20D 24 MC62D 1800 54.5 43.0 13.50 11.60

For Notes See Page 5.

397763-YTG-B-0508

Johnson Controls Unitary Products 5

— = Not applicable.

13 SEER HP WITH AV / SV / F*FV - VARIABLE SPEED

THGD18S41S1 AV24 17 – 550 17.0 13.0 14.00 12.00

THGD24S41S1 AV24 17 – 750 23.0 17.2 14.00 12.00

AV36 21 – 750 23.0 18.0 14.00 12.00

THGD30S41S1 AV36 21 – 1000 29.0 24.4 14.00 12.00

THGD36S41S1 AV36 21 – 1250 35.0 28.0 13.50 11.50

THGD42S41S1 AV/SV48 24 – 1400 41.5 32.0 14.00 12.00

THGD48S41S1 AV/SV48 24 – 1600 47.5 36.2 14.00 11.80

AV/SV60 24 – 1650 47.5 36.6 14.00 11.80

F4FV060 24 – 1600 47.5 36.2 14.00 11.80

13 SEER HP WITH AHP / SHP / F*FP

THGD18S41S1 AHP18 17 – 600 17.0 12.7 13.00 11.00

F4FP024 17 – 600 17.0 12.6 13.00 11.00

THGD24S41S1 AHP30 17 – 800 23.0 17.2 13.00 11.00

F4FP030 17 – 800 23.0 16.9 13.00 11.00

THGD30S41S1 AHP36 21 – 1000 29.0 23.2 13.00 11.00

F4FP040 21 – 1000 29.0 22.6 13.00 11.00

THGD36S41S1 AHP36 21 – 1200 35.0 26.8 13.00 11.00

F4FP045 24 – 1200 35.0 26.8 13.00 11.00

THGD42S41S1 AHP/SHP48 21 – 1400 41.5 31.4 13.00 11.00

F4FP045 24 – 1400 41.0 31.2 13.00 11.00

F5FP048 24 – 1450 41.0 32.6 13.00 11.00

THGD48S41S1 AHP/SHP60 24 – 1600 47.0 36.0 14.00 11.50

F5FP048 24 – 1700 47.5 36.6 14.00 11.50

F5FP060 24 – 1700 47.5 36.8 14.00 11.50

Rated in accordance with DOE test procedures (Federal Register 12-27-79 and 3-18-88) and ARI Standards 210.

Cooling MBH based on 80°F entering air temperature, 50% RH, and rated air flow.

EER (Energy Efficiency Ratio) is the total cooling output in BTU’s at 95°F outdoor ambient divided by the total electric power in watt-hours at those conditions.

SEER (Seasonal Energy Efficiency Ratio) is the total cooling output in BTU’s during a normal annual usage period for cooling divided by the total electric power

input in watt-hours during the same period.

1. MC coils available with a factory installed horizontal drain pan. See price pages for specific model number.

COOLING CAPACITY - With Air Handler Coils (Continued)

UNIT

MODEL

AIR HANDLER COIL

MODEL1

COOLING

MODEL W RATED

CFM NET MBH SEER EER

TOTAL SENS.

397763-YTG-B-0508

6Johnson Controls Unitary Products

COOLING CAPACITY - Upflow, Downflow & Horizontal Furnaces and Coils

UNIT MODEL FURNACE** COIL

MODEL

COOLING

CFM RANGE

(Min.-max.) WRATED

CFM NET MBH SEER1EER

TOTAL SENS.

THGD18S41S1

450 - 750 14,17 FC/MC/PC18 600 17.0 12.6 13.00 11.00

450 - 750 14,17 FC/MC/PC24 600 17.0 12.9 13.50 11.00

450 - 750 14 HC18 600 17.0 12.6 13.00 11.00

450 - 750 14 HC30 600 17.0 12.8 13.00 11.00

450 - 750 14 HD24 600 17.0 13.0 13.50 11.00

THGD24S41S1

600 - 1000 14,17 FC/MC/PC24 800 23.0 17.1 13.00 11.00

600 - 1000 14,17 FC/MC/PC30 800 23.0 17.2 13.00 11.00

600 - 1000 14 FC/MC/PC32 800 23.0 17.5 13.00 11.00

600 - 1000 17,21 FC/MC/PC35 800 23.0 17.5 13.00 11.00

600 - 1000 14 HC30 800 23.0 17.2 13.00 11.00

600 - 1000 17 HC36 800 23.0 17.5 13.00 11.00

600 - 1000 14,17 HD36 800 23.0 16.4 13.00 11.00

THGD30S41S1

800 - 1200 14 FC/MC/PC32 1000 29.0 23.2 13.00 11.00

800 - 1200 17,21 FC/MC/PC35 1000 29.0 23.2 13.00 11.00

800 - 1200 14 FC/MC/PC37 1000 29.0 23.4 13.00 11.00

800 - 1200 17,21 FC/MC/PC43 1000 29.0 23.4 13.00 11.00

800 - 1200 17 HC36 1000 29.0 23.2 13.00 11.00

800 - 1200 21 HC42 1000 29.0 23.4 13.00 11.00

800 - 1200 21,24 HD48 1000 29.0 23.4 13.00 11.00

THGD36S41S1

1000 - 1400 14 FC/MC/PC37 1200 35.0 26.6 13.00 11.00

1000 - 1400 17,21 FC/MC/PC43 1200 35.0 26.8 13.00 11.00

1000 - 1400 21,24 FC/MC/PC48 1200 35.0 27.0 13.00 11.00

1000 - 1400 21 HC42 1200 35.0 26.8 13.00 11.00

1000 - 1400 21,24 HD48 1200 35.0 26.8 13.00 11.00

THGD42S41S1

1200 - 1600 21,24 FC/MC/PC48 1400 41.5 31.4 13.00 11.00

1200 - 1600 21,24 FC/MC/PC60 1400 41.0 31.2 13.00 11.00

1200 - 1600 21 HC42 1400 41.0 31.2 13.00 11.00

1200 - 1600 24 HC60 1400 41.0 31.2 13.00 11.00

1200 - 1600 21,24 HD60 1400 41.5 31.4 13.00 11.00

THGD48S41S1

1400 - 1800 21,24 FC/MC/PC48 1600 47.0 35.2 13.00 11.00

1400 - 1800 21,24 FC/MC/PC60 1600 47.0 35.6 13.00 11.00

1400 - 1800 24 HC60 1600 47.0 35.6 13.00 11.00

1400 - 1800 21,24 HD60 1600 47.0 35.4 13.00 11.00

1400 - 1800 21,24 MC62 1600 47.0 35.6 13.00 11.00

THGD60S41S1 1600 - 2000 21,24 MC62 1800 54.0 42.5 13.00 11.00

1. Requires a 2FD06700224 Blower Time Delay unless a standard furnace is equipped with one.

** Refer to Quick Selection Chart for specific furnace match-up.

397763-YTG-B-0508

Johnson Controls Unitary Products 7

COOLING CAPACITY - With Variable Speed Furnaces

UNIT MODEL VARIABLE SPEED

FURNACE MODEL COIL

MODEL1WCOOLING

RATED

CFM Net MBH SEER EER

TOTAL SENS.

13 SEER HP WITH VARIABLE SPEED FURNACES2

THGD18S41S1

PV8*A12 FC/MC/PC18A 14 600 17.0 12.9 14.00 12.00

PV9*A12 FC/MC/PC18A 14 600 17.0 12.9 14.00 12.00

P(C,V)9*B12 FC/MC/PC18B 17 600 17.0 12.9 14.00 12.00

PV8*B16 FC/MC/PC/UC18B 17 600 17.0 12.9 14.00 12.00

PV8*A12 FC/MC/PC24A 14 600 17.0 13.2 14.00 12.00

PV9*A12 FC/MC/PC24A 14 600 17.0 13.2 14.00 12.00

P(C,V)9*B12 FC/MC/PC24B 17 600 17.0 13.2 14.00 12.00

PV8*B16 FC/MC/PC/UC24B 17 600 17.0 13.2 14.00 12.00

PV8*A12 HC18A 14 600 17.0 12.9 14.00 12.00

PV9*A12 HC18A 14 600 17.0 12.9 14.00 12.00

PV8*A12 HC30A 14 600 17.0 13.2 14.00 12.00

PV9*A12 HC30A 14 600 17.0 13.1 14.00 12.00

PV8*A12 HD24A 14 600 17.0 13.3 14.00 12.00

PV9*A12 HD24A 14 600 17.0 13.3 14.00 12.00

P(C,V)9*B12 HD24 17 600 17.0 13.3 14.00 12.00

PV8*B16 HD24 17 600 17.0 13.3 14.00 12.00

THGD24S41S1

PV8*A12 FC/MC/PC24A 14 750 23.0 17.1 14.00 12.00

PV9*A12 FC/MC/PC24A 14 800 23.0 17.4 14.00 12.00

P(C,V)9*B12 FC/MC/PC24B 17 800 23.0 17.5 14.00 12.00

PV8*A12 FC/MC/PC30A 14 750 23.0 17.2 14.00 12.00

PV9*A12 FC/MC/PC30A 14 800 23.0 17.5 14.00 12.00

P(C,V)9*B12 FC/MC/PC30B 17 800 23.0 17.5 14.00 12.00

PV8*A12 FC/MC/PC32A 14 750 23.0 17.4 14.00 12.00

PV9*A12 FC/MC/PC32A 14 800 23.0 17.7 14.00 12.00

P(C,V)9*B12 FC/MC/PC35B 17 800 23.0 17.8 14.00 12.00

P(C,V)9*C16 FC/MC/PC35C 21 850 23.0 18.6 14.00 12.00

PV8*A12 HC30A 14 750 23.0 17.2 14.00 12.00

PV9*A12 HC30A 14 800 23.0 17.6 14.00 12.00

P(C,V)9*B12 HC36B 17 800 23.0 17.8 14.00 12.00

PV8*A12 HD36A 14 750 23.0 16.7 14.00 12.00

PV9*A12 HD36A 14 800 23.0 16.8 14.00 12.00

P(C,V)9*B12 HD36B 17 800 23.0 16.8 14.00 12.00

THGD30S41S1

PV8*A12 FC/MC/PC32A 14 1000 29.0 23.4 14.00 12.00

PV9*A12 FC/MC/PC32A 14 1000 29.0 23.4 13.50 12.00

PV8*B16 FC/MC/PC35B 17 1050 29.0 24.4 14.00 12.00

PV8*C16 FC/MC/PC35C 21 1000 29.0 23.6 14.00 12.00

PV8*C20 FC/MC/PC35C 21 1100 29.0 25.0 14.00 12.00

P(C,V)9*B12 FC/MC/PC35B 17 1000 29.0 23.6 14.00 12.00

P(C,V)9*C16 FC/MC/PC35C 21 1000 29.0 23.6 14.00 12.00

P(C,V)9*C20 FC/MC/PC35C 21 1050 29.0 23.4 13.50 12.00

PV8*A12 FC/MC/PC37A 14 1000 29.0 23.8 13.50 12.00

PV9*A12 FC/MC/PC37A 14 1000 29.0 23.6 13.50 12.00

PV8*B16 FC/MC/PC43B 17 1050 29.0 24.6 14.00 12.00

PV8*C16 FC/MC/PC43C 21 1000 29.0 24.0 14.00 12.00

PV8*C20 FC/MC/PC43C 21 1100 29.0 25.6 14.00 12.00

P(C,V)9*B12 FC/MC/PC43B 17 1000 29.0 23.8 14.00 12.00

P(C,V)9*C16 FC/MC/PC43C 21 1000 29.0 23.8 14.00 12.00

P(C,V)9*C20 FC/MC/PC43C 21 1050 29.0 23.8 14.00 12.00

PV8*B16 HC36B 17 1050 29.0 24.2 14.00 12.00

P(C,V)9*B12 HC36B 17 1000 29.0 23.6 14.00 12.00

For Notes See Page 9.

397763-YTG-B-0508

8Johnson Controls Unitary Products

THGD30S41S1

PV8*C16 HC42C 21 1000 29.0 24.0 14.00 12.00

PV8*C20 HC42C 21 1100 29.0 25.6 14.00 12.00

P(C,V)9*C16 HC42C 21 1000 29.0 23.8 14.00 12.00

P(C,V)9*C20 HC42C 21 1050 29.0 23.8 14.00 12.00

PV8*C16 HD48C 21 1000 29.0 24.0 14.00 12.00

PV8*C20 HD48C 21 1100 29.0 25.4 14.00 12.00

P(C,V)9*C16 HD48C 21 1000 29.0 23.8 14.00 12.00

P(C,V)9*C20 HD48C 21 1050 29.0 23.8 14.00 12.00

P(C,V)9*D20 HD48D 24 1050 29.0 24.6 14.00 12.00

THGD36S41S1

PV8*A12 FC/MC/PC37A 14 1150 35.0 26.8 13.35 11.50

PV9*A12 FC/MC/PC37A 14 1100 35.0 25.8 13.20 11.50

PV8*B16 FC/MC/PC43B 17 1200 35.0 27.2 13.50 11.50

PV8*C16 FC/MC/PC43C 21 1200 35.0 27.2 13.50 11.50

PV8*C20 FC/MC/PC43C 21 1200 35.0 27.2 13.50 11.50

P(C,V)9*B12 FC/MC/PC43B 17 1200 35.0 27.0 13.50 11.50

P(C,V)9*C16 FC/MC/PC43C 21 1200 35.0 27.2 13.50 11.50

P(C,V)9*C20 FC/MC/PC43C 21 1200 35.0 27.2 13.50 11.50

PV8*C16 FC/MC/PC48C 21 1200 35.0 27.4 13.50 11.50

PV8*C20 FC/MC/PC48C 21 1200 35.0 27.4 13.50 11.50

P(C,V)9*C16 FC/MC/PC48C 21 1200 35.0 27.4 13.50 11.50

P(C,V)9*C20 FC/MC/PC48C 21 1200 35.0 27.4 13.50 11.50

P(C,V)9*D20 FC/MC/PC48D 24 1200 35.0 27.4 13.50 11.50

PV8*C16 HC42C 21 1200 35.0 27.2 13.50 11.50

PV8*C20 HC42C 21 1200 35.0 27.2 13.50 11.50

P(C,V)9*C16 HC42C 21 1200 35.0 27.2 13.50 11.50

P(C,V)9*C20 HC42C 21 1200 35.0 27.2 13.50 11.50

PV8*C16 HD48C 21 1200 35.0 27.2 13.50 11.50

PV8*C20 HD48C 21 1200 35.0 27.2 13.50 11.50

P(C,V)9*C16 HD48C 21 1200 35.0 27.2 13.50 11.50

P(C,V)9*C20 HD48C 21 1200 35.0 27.2 13.50 11.50

P(C,V)9*D20 HD48D 24 1200 35.0 27.2 13.50 11.50

THGD42S41S1

PV8*C16 FC/MC/PC48C 21 1400 42.0 31.6 13.50 11.50

PV8*C20 FC/MC/PC48C 21 1400 42.0 31.8 14.00 11.50

P(C,V)9*C16 FC/MC/PC48C 21 1400 41.5 31.6 13.50 11.50

P(C,V)9*C20 FC/MC/PC48C 21 1350 42.0 31.6 14.00 11.50

P(C,V)9*D20 FC/MC/PC48D 24 1350 42.0 31.8 14.00 12.00

PV8*C16 FC/MC/PC60C 21 1400 41.5 31.4 13.50 11.50

PV8*C20 FC/MC/PC60C 21 1400 41.5 31.6 13.50 11.50

P(C,V)9*C16 FC/MC/PC60C 21 1400 41.0 31.4 13.50 11.50

P(C,V)9*C20 FC/MC/PC60C 21 1350 41.5 31.4 13.50 11.50

P(C,V)9*D20 FC/MC/PC60D 24 1350 41.5 31.6 14.00 11.50

PV8*C16 HC42C 21 1400 41.5 31.4 13.50 11.50

PV8*C20 HC42C 21 1400 41.5 31.4 13.50 11.50

P(C,V)9*C16 HC42C 21 1400 41.5 31.4 13.50 11.50

P(C,V)9*C20 HC42C 21 1350 41.5 31.4 13.50 11.50

P(C,V)9*D20 HC60D 24 1350 41.5 31.6 14.00 11.50

PV8*C16 HD60C 21 1400 42.0 31.8 13.50 11.50

PV8*C20 HD60C 21 1400 42.0 31.8 14.00 11.50

P(C,V)9*C16 HD60C 21 1400 42.0 31.6 13.50 11.50

P(C,V)9*C20 HD60C 21 1350 42.0 31.8 14.00 11.50

P(C,V)9*D20 HD60D 24 1350 42.0 31.8 14.00 12.00

For Notes See Page 9.

COOLING CAPACITY - With Variable Speed Furnaces (Continued)

UNIT MODEL VARIABLE SPEED

FURNACE MODEL COIL

MODEL1WCOOLING

RATED

CFM Net MBH SEER EER

TOTAL SENS.

13 SEER HP WITH VARIABLE SPEED FURNACES2

397763-YTG-B-0508

Johnson Controls Unitary Products 9

THGD48S41S1

PV8*C16 FC/MC/PC48C 21 1500 46.5 34.2 13.00 11.00

PV8*C20 FC/MC/PC48C 21 1600 47.0 35.4 13.00 11.50

P(C,V)9*C16 FC/MC/PC48C 21 1600 47.0 35.2 13.00 11.00

P(C,V)9*C20 FC/MC/PC48C 21 1600 47.0 35.4 14.00 11.50

P(C,V)9*D20 FC/MC/PC48D 24 1550 47.0 35.6 14.00 11.50

PV8*C16 FC/MC/PC60C 21 1500 46.5 34.6 13.00 11.00

PV8*C20 FC/MC/PC60C 21 1600 47.0 35.8 14.00 11.50

P(C,V)9*C16 FC/MC/PC60C 21 1600 47.0 35.6 13.00 11.00

P(C,V)9*C20 FC/MC/PC60C 21 1600 47.0 35.6 14.00 11.50

P(C,V)9*D20 FC/MC/PC60D 24 1550 47.0 35.8 14.00 11.50

P(C,V)9*D20 HC60D 24 1550 47.0 35.8 14.00 11.50

PV8*C16 HD60C 21 1500 46.5 34.4 13.00 11.00

PV8*C20 HD60C 21 1600 47.0 35.4 14.00 11.50

P(C,V)9*C16 HD60C 21 1600 47.0 35.4 13.00 11.00

P(C,V)9*C20 HD60C 21 1600 47.0 35.4 14.00 11.50

P(C,V)9*D20 HD60D 24 1550 47.0 35.6 14.00 11.50

PV8*C20 MC62C 21 1600 47.5 35.8 14.00 11.50

P(C,V)9*C16 MC62C 21 1600 47.0 35.6 13.00 11.00

P(C,V)9*C20 MC62C 21 1600 47.0 35.8 14.00 11.50

P(C,V)9*D20 MC62D 24 1550 47.5 36.0 14.00 11.80

THGD60S41S1 PV8*C20 MC62C 21 1750 54.0 43.0 13.00 11.45

P(C,V)9*C20 MC62C 21 1650 53.0 41.0 13.00 11.25

P(C,V)9*D20 MC62D 24 1600 53.5 41.0 13.50 11.50

1. MC coils available with a factory installed horizontal drain pan. See price pages for specific model number.

2. Variable speed furnaces have B.O.D (Blower on Delay) standard.

COOLING CAPACITY - With Variable Speed Furnaces (Continued)

UNIT MODEL VARIABLE SPEED

FURNACE MODEL COIL

MODEL1WCOOLING

RATED

CFM Net MBH SEER EER

TOTAL SENS.

13 SEER HP WITH VARIABLE SPEED FURNACES2

397763-YTG-B-0508

10 Johnson Controls Unitary Products

HEATING PERFORMANCE - With Air Handler

UNIT

MODEL* AIR

HANDLER COIL1

MODEL

ARI HEATING2

47°F17°FHSPF

MBH COP KW MBH COP KW STD

13 SEER HP WITH MA

THGD18S41S1 MA08B FC/MC18B 17.0 3.32 1.50 12.7 3.00 1.24 7.70

MA08B FC/MC24B 17.0 3.44 1.45 10.4 2.60 1.17 7.70

THGD24S41S1 MA08B FC/MC/PC24B 23.2 3.40 2.00 12.6 2.24 1.65 7.70

MA08B FC/MC/PC30B 23.2 3.40 2.00 12.6 2.24 1.65 7.70

MA08B FC/MC/PC35B 23.2 3.40 2.00 12.6 2.24 1.65 7.70

THGD30S41S1 MA12B FC/MC/PC35B 28.0 3.34 2.46 16.4 2.30 2.09 7.70

MA12B FC/MC/PC43B 28.2 3.40 2.43 16.6 2.32 2.10 7.70

THGD36S41S1

MA12B FC/MC/PC43B 35.0 3.42 3.00 21.2 2.36 2.63 8.00

MA14D FC/MC/PC48D 35.0 3.42 3.00 21.4 2.36 2.66 8.00

MA16C FC/MC43C 35.0 3.48 3.03 21.0 2.40 2.56 8.00

MA16C FC/MC48C 35.0 3.48 3.03 21.0 2.40 2.56 8.00

THGD42S41S1

MA14D FC/MC/PC48D 41.0 3.48 3.45 28.0 2.46 3.34 8.00

MA16C FC/MC/PC48C 41.0 3.48 3.45 28.0 2.46 3.34 8.00

MA14D FC/MC/PC60D 41.0 3.66 3.28 27.8 2.56 3.18 8.00

MA16C FC/MC/PC60C 41.0 3.66 3.28 27.8 2.56 3.18 8.00

THGD48S41S1

MA16C FC/MC/PC48C 50.5 3.32 4.46 30.8 2.24 4.03 8.00

MA20D FC/MC/PC48D 50.5 3.32 4.46 30.8 2.24 4.03 8.00

MA16C FC/MC/PC60C 51.0 3.50 4.27 30.6 2.34 3.83 8.00

MA20D FC/MC/PC60D 51.0 3.50 4.27 30.6 2.34 3.83 8.00

MA20D MC62D 50.5 3.38 4.38 30.6 2.28 3.93 8.00

THGD60S41S1 MA20D MC62D 56.5 3.48 4.76 35.4 2.42 4.29 8.00

13 SEER HP WITH MV - VARIABLE SPEED

THGD18S41S1 MV12B FC/MC18B 16.7 3.52 1.39 12.7 3.00 1.24 8.00

MV12B FC/MC24B 17.0 3.66 1.36 9.8 2.78 1.03 8.00

THGD24S41S1

MV12B FC/MC/PC24B 22.8 3.72 1.80 12.4 2.50 1.45 8.00

MV12B FC/MC/PC30B 22.8 3.72 1.80 12.4 2.50 1.45 8.00

MV12B FC/MC/PC35B 22.8 3.72 1.80 12.4 2.50 1.45 8.00

MV16C FC/MC/PC35C 22.8 3.72 1.80 12.4 2.50 1.45 8.00

THGD30S41S1

MV12B FC/MC/PC35B 27.4 3.50 2.29 15.9 2.42 1.93 8.00

MV16C FC/MC/PC35C 27.4 3.52 2.28 15.9 2.42 1.93 8.00

MV12B FC/MC/PC43B 27.8 3.58 2.28 16.1 2.46 1.92 8.00

MV16C FC/MC/PC43C 27.6 3.60 2.25 16.1 2.48 1.90 8.00

THGD36S41S1

MV12B FC/MC/PC43B 35.0 3.52 2.91 20.8 2.44 2.50 8.00

MV16C FC/MC/PC43C 35.0 3.58 2.87 20.6 2.48 2.43 8.00

MV12D FC/MC/PC48D 35.0 3.54 2.90 20.6 2.48 2.43 8.00

MV16C FC/MC/PC48C 35.0 3.60 2.85 20.6 2.50 2.42 8.00

MV20D FC/MC/PC48D 35.0 3.60 2.85 20.6 2.50 2.42 8.00

THGD42S41S1 MV16C FC/MC/PC48C 41.0 3.60 3.34 27.4 2.54 3.16 8.00

MV20D FC/MC/PC48D 41.0 3.62 3.32 27.4 2.56 3.14 8.00

MV20D FC/MC/PC60D 41.0 3.84 3.13 27.0 2.68 2.95 8.00

THGD48S41S1

MV16C FC/MC/PC48C 50.0 3.40 4.31 30.4 2.30 3.87 8.00

MV20D FC/MC/PC48D 50.0 3.38 4.34 30.4 2.28 3.91 8.00

MV20D FC/MC/PC60D 50.5 3.60 4.11 30.2 2.40 3.69 8.00

MV20D MC62D 50.0 3.48 4.21 30.0 2.34 3.76 8.00

THGD60S41S1 MV20D MC62D 56.5 3.54 4.68 35.2 2.46 4.19 8.00

For Notes See Page 11.

Otros manuales para THGD18 THRU 60

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Bomba de calor de York

York

York YLPA Manual de usuario

York

York YMAA 0045 Manual de usuario

York

York YCUL0026 Manual de usuario

York

York E1FB012 Manual de usuario

York

York Sunline 2000 Manual de usuario

York

York 33p502-05 Manual de usuario

York

York MCC Guía de inicio rápido

York

York YLPA 0115SE Manual de usuario

York

York YAFT026 Manual de usuario

York

York EKKC 12 FS Manual de usuario

York

York FCHP090 Manual de usuario

York

York SPLIT-SYSTEM YHJD18 THRU 60 Guía de inicio rápido

York

York Sunline 2000 Manual de usuario

York

York 161038-YUM-A-1205 Guía

York

York E1RA Series Manual de usuario

York

York YAWT100 Manual de usuario

York

York YAST026 Manual de usuario

York

York AFFINITY BHX Series Guía de inicio rápido

York

York YZF Manual de usuario

York

York YHJF060 Manual de usuario

York

York LX series Manual de usuario

York

York SUNLINE 2000 B1HN090 Manual de usuario

York

York YAZS022 Manual de usuario

York

York AFFINITY OptiHeat YAW040 Manual de usuario

Manuales populares de Bomba de calor de otras marcas

MICROWELL

MICROWELL HP 1000 GREEN Manual de usuario

Sanyo

Sanyo SAP120FCH Manual de usuario

Daikin

Daikin EHYHBH05AA Manual de usuario

Panasonic

Panasonic WH-SDF03E3E5 Guía

Bryant

Bryant 544B Manual de usuario

Airxcel

Airxcel 45000 Series Manual

Mitsubishi Electric

Mitsubishi Electric PUZ-SWM60VAA Manual de usuario

Dimplex

Dimplex LI 16I-TUR Guía del usuario

Carrier

Carrier WSHP Open v3 Guía de configuración rápida

TGM

TGM CTV14CN018A Manual de usuario

Carrier

Carrier 38MGQ Series Manual de usuario

Kokido

Kokido K2O K880BX/EU Guía de solución de problemas

Viessmann

Viessmann VITOCAL 300-G PRO Type BW 2150 Guía rápida

Carrier

Carrier 48EZN Manual de usuario

Viessmann

Viessmann KWT Vitocal 350-G Pro Series Instrucciones de funcionamiento

Ariston

Ariston NIMBUS Manual de usuario

Weishaupt

Weishaupt WWP L 7 Guía del usuario

GE Zoneline AZ85H09EAC Manual de usuario