YOKOGAWA UM330 Manual de usuario
Instruction
Manual
IM 05F01D02-41E
Models UM350/UM330
Digital Indicator with Alarms
User’s Manual
IM 05F01D02-41E
1st Edition
Blank Page
<Toc> <Rev> i
IM 05F01D02-41E
Introduction
Thank you for purchasing the UM350/UM330 digital indicator with alarms.
■How to Use the Manuals
Purpose Title Description
Setup Describes the tasks (installation, wiring, and others) required
to make the indicator ready for operations.
Basic operation
Describes examples of setting PV input types, and alarm
types. Making settings described herein allows you to carry
out basic monitoring.
Operating
procedures
and troubleshooting
Describes examples of setting alarm setpoints, as well as
key operation necessary to run the indicator.
Brief operation
and setpoint recording
Contains the parameter map used as a guideline for setting
parameters and lists of parameters for recording user settings.
1. Installation
2.
Initial Settings
3. Operations
4.1 Troubleshooting
5. Parameters
■Regarding This User’s Manual
(1) This manual should be provided to the end user. Keep an extra copy or copies of the
manual in a safe place.
(2) Read this manual carefully to gain a thorough understanding of how to operate this
product before starting operation.
(3) This manual describes the functions of this product. Yokogawa M&C Corporation
(hereinafter simply referred to as Yokogawa) does not guarantee the application of
these functions for any particular purpose.
(4) Under absolutely no circumstances may the contents of this manual, in part or in
whole, be transcribed or copied without permission.
(5) The contents of this manual are subject to change without prior notice.
(6) Every effort has been made to ensure that the details of this manual are accurate.
However, should any errors be found or important information be omitted, please
contact your nearest Yokogawa representative or our sales office.
1st Edition : May 31,2000-00Media No. IM 05F01D02-41E (CD) 1st Edition : May 2000 (YK)
All Rights Reserved Copyright © 2000, Yokogawa M&C Corporation
ii
<Toc> <Rev>
IM 05F01D02-41E 1st Edition : May 31,2000-00
■Safety Precautions
The following symbol is indicated on the indicator to ensure safe use.
CAUTION
This symbol on the indicator indicates that the operator must refer to an explanation in the
user’s manual in order to avoid the risk of injury or death of personnel or damage to the
instrument. The manual describes how the operator should exercise special care to avoid
electric shock or other dangers that may result in injury or loss of life.
The following symbols are used in the hardcopy user’s manuals.
NOTE
Indicates that operating the hardware or software in a particular manner may damage it or
result in a system failure.
IMPORTANT
Draws attention to information that is essential for understanding the operation and/or
features of the indicator.
■Regarding Force Majeure
Yokogawa M&C Corporation assumes no liability for any loss or damage, direct or indirect,
caused by the use of or unpredictable defects of the product.
Toc-1
<Int> <Rev>
IM 05F01D02-41E
CONTENTS
1. Installation .............................................................................................. 1-1
1.1 Model and Suffix Codes.................................................................................. 1-1
1.2 How to Install................................................................................................... 1-2
1.3 How to Connect Wires .................................................................................... 1-5
1.4 Hardware Specifications ................................................................................ 1-7
1.5 Terminal Wiring Diagrams .............................................................................1-11
2. Initial Settings ......................................................................................... 2-1
2.1 Names and Functions of Front Panel Parts ................................................... 2-2
2.2 Setting PV Input Type (Setting First at Power-on) ......................................... 2-3
2.3 Changing PV Input Type ................................................................................. 2-7
2.4 Changing Alarm Type ..................................................................................... 2-9
2.5 Setting Hysteresis in Alarm Setpoint ............................................................2-11
3. Operations .............................................................................................. 3-1
3.1 Monitoring-purpose Operating Display Available during Operation ........... 3-1
3.2 Setting Alarm Setpoints .................................................................................. 3-2
4. Troubleshooting and Maintenance ........................................................ 4-1
4.1 Troubleshooting .............................................................................................. 4-1
4.2 Maintenance .................................................................................................... 4-4
4.2.1 Cleaning ........................................................................................... 4-4
4.2.2 Replacing Brackets ........................................................................... 4-4
4.2.3 Attaching Terminal Cover .................................................................. 4-4
4.2.4 Replacing Parts with a Limited Service Life ....................................... 4-6
5. Parameters .............................................................................................. 5-1
5.1 Parameter Map ................................................................................................ 5-1
5.2 Lists of Parameters ......................................................................................... 5-2
1st Edition : May 31,2000-00
Models UM350/UM330
Digital Indicator with Alarms
User’s Manual
IM 05F01D02-41E 1st Edition
Blank Page
<Toc> <1. Installation> 1-1
IM 05F01D02-41E
1. Installation
This chapter describes installation, wiring, and other tasks required to make the
indicator ready for operation.
1.1 Model and Suffix Codes
Before using the indicator, check that the model and suffix codes match your order.
Model Suffix Code Description
UM350
UM330
Type
Digital indicator with Alarms (provided with retransmission output and 15
V DC loop power supply as standard)
-0 Standard type with three alarms
-3 Standard type with three alarms (with 24 V DC loop power supply)
0 None
1 With communication and additional alarm-4
2 With additional alarm-4
Optional functions
Check that the following items are provided:
• Digital indicator with alarms (of ordered model) .................... 1
• Brackets (mounting hardware) ............................................. 1 pair
• Unit label.............................................................................. 1
• User’s Manuals .................................................................... 3 (A2 size)
• User’s Manual (Reference) (CD-ROM version)
(only for indicators with optional communication functions)... 1
1st Edition : May 31,2000-00
1-2
<Toc> <1. Installation>
IM 05F01D02-41E 1st Edition : May 31,2000-00
1.2 How to Install
NOTE
To install the indicator, select a location where:
1. no one may accidentally touch the terminals,
150 mm150 mm
150 mm
150 mm
2. mechanical vibrations are minimal,
3. corrosive gas is minimal,
4. temperature can be maintained at about 23C and
the fluctuation is minimal,
5. no direct radiant heat is present,
6. no magnetic disturbances are caused,
7. no wind blows against the terminal board (reference junction compensation element),
8. no water is splashed,
9. no flammable materials are around,
Never place the indicator directly on flammable items or equipment.
If the indicator has to be installed close to flammable items or equipment, be sure to pro-
vide shielding panels all around the indicator, at least 150 mm away from every side; the
panels should be made of either 1.43 mm-thick metal-plated steel plates or 1.6 mm-thick
uncoated steel plates.
NOTE
Never touch the opening at the bottom of the case. It is to be used in the factory at ship-
ping.
●Installation Position
Install the indicator at an angle within 30from horizontal with the front panel facing up-
ward. Do not install it facing downward. The position of right and left sides should be hori-
zontal.
Front panel
of indicator Must not
exceed 30
30Rear of
indicator
<Toc> <1. Installation> 1-3
IM 05F01D02-41E 1st Edition : May 31,2000-00
■External Dimensions and Panel Cutout Dimensions
(25)
(53)
[(N-1)96+92]117 min.
145 min.
+0.8
0
+0.8
0
92
+0.8
0
92
+0.8
0
92
"N" stands for the number of controllers to be
installed.
However, the measured value applies if N 5.
100
11
UM350
General installation Side-by-side close installation
1 to 10 mm (Panel thickness)
Small bracket
Large bracket
91.8
112
Unit: mm
96
96
48
UM330
96
10011
1 to 10 mm (Panel thickness)
Small bracket
Small bracket
91.8
112
Unit: mm
145 min.
General installation
Front of indicator
(53)
(25) 70 min.
+0.8
0
92
+0.6
0
45
1-4
<Toc> <1. Installation>
IM 05F01D02-41E 1st Edition : May 31,2000-00
■How to Install
CAUTION
Turn off the power to the indicator before installing it on the panel because there is a possi-
bility of electric shock.
After opening the mounting hole on the panel, follow the procedures below to install the
indicator:
1. Insert the indicator into the opening from the front of the panel so that the terminal
board on the rear is at the far side.
2. Set the brackets in place on the top and bottom of the indicator as shown in the figure
below, then tighten the screws of the brackets. Take care not to overtighten them.
Large bracket
(top mounting hardware)
Terminal board
Small bracket
(bottom mounting hardware)
Panel
Insert a screwdriver into the
brackets to tighten the screws.
Direction to insert the
indicator
Insert the
indicator
into the opening at
the front of the panel.
Note: Right and left mounting for UM330.
Otros manuales para UM330
1
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Panel táctil de YOKOGAWA
Manuales populares de Panel táctil de otras marcas
IBASE Technology
IBASE Technology ASTUT-152-RE1S Manual de usuario
YASKAWA
YASKAWA TP 610C Manual de usuario
B&R
B&R Power Panel C Series Manual de usuario
Beijer Electronics
Beijer Electronics X2 control Manual de usuario
AXIOMTEK
AXIOMTEK GOT321W-521 Manual de usuario
TRIDONIC.ATCO
TRIDONIC.ATCO x-touchBOX Manual de usuario
