YOKOGAWA AQ1100A Manual de usuario

User’s

Manual AQ1100A, AQ1100B, AQ1100D

OLTS

Multi Field Tester

IM AQ1100-01EN

4th Edition

IM AQ1100-01EN

Thank you for purchasing the AQ1100A, AQ1100B, and AQ1100D OLTS (Optical Loss Test Set) Multi

Field Tester.

This user’s manual explains the features, operating procedures, and handling precautions of the

AQ1100A, AQ1100B, and AQ1100D. To ensure correct use, please read this manual thoroughly before

operation. Keep this manual in a safe place for quick reference in the event that a question arises.

This manual is one of three AQ1100A, AQ1100B, and AQ1100D manuals. Please read all the manuals.

Manual Title Manual No. Description

AQ1100A, AQ1100B, AQ1100D OLTS

Multi Field Tester Operation Guide

IM AQ1100-02EN This guide focuses on the handling precautions,

basic operations, and specifications of the AQ1100A,

AQ1100B, and AQ1100D.

AQ1100A, AQ1100B, AQ1100D OLTS

Multi Field Tester

User’s Manual (included in CD)

IM AQ1100-01EN This manual. Explains all AQ1100A, AQ1100B, and

AQ1100D features, except for the communication

features, and how to use them.

AQ1100A, AQ1100B, AQ1100D OLTS

Multi Field Tester Communication

Interface User’s Manual (included in

CD)

IM AQ1100-17EN Explains the features related to using communication

commands to control the AQ1100A, AQ1100B, and

AQ1100D.

Notes

• Thecontentsofthismanualaresubjecttochangewithoutpriornoticeasaresultofcontinuing

improvements to the instrument’s performance and functionality. The figures given in this manual

may differ from those that actually appear on your screen.

• Everyefforthasbeenmadeinthepreparationofthismanualtoensuretheaccuracyofits

contents. However, should you have any questions or find any errors, please contact your nearest

YOKOGAWA dealer.

• Copyingorreproducingalloranypartofthecontentofthismanualwithoutthepermissionof

YOKOGAWA is strictly prohibited.

Trademarks

• Microsoft,Windows,andWindowsXPareeitherregisteredtrademarksortrademarksofMicrosoft

Corporation in the United States and/or other countries.

• Adobe,Acrobat,andPostScriptaretrademarksofAdobeSystemsIncorporated.

• Inthismanual,theTMand®symbolsdonotaccompanytheirrespectiveregisteredtrademarkor

trademark names.

• Othercompanyandproductnamesareregisteredtrademarksortrademarksoftheirrespective

holders.

Revisions

1st Edition: November 2009

2nd Edition: December 2014

3rd Edition: December 2015

4th Edition: October 2017

4th Edition: October 2017 (YMI)

ii IM AQ1100-01EN

Conventions Used in This Manual

Notes

The notes and cautions in this manual are categorized using the following symbols.

Improper handling or use can lead to injury to the user or damage to the

instrument. This symbol appears on the instrument to indicate that the user must

refer to the user’s manual for special instructions. The same symbol appears

in the corresponding place in the user’s manual to identify those instructions.

Inthemanual,thesymbolisusedinconjunctionwiththeword“WARNING”or

“CAUTION.”

WARNING Callsattentiontoactionsorconditionsthatcouldcauseseriousorfatalinjuryto

the user, and precautions that can be taken to prevent such occurrences.

CAUTION Callsattentiontoactionsorconditionsthatcouldcauselightinjurytotheuser

or cause damage to the instrument or user’s data, and precautions that can be

taken to prevent such occurrences.

Note Calls attention to information that is important for proper operation of the

instrument.

Symbols and Conventions Used in Procedural Explanations

The contents of the procedural explanations are indicated using the following symbols.

Procedure Carry out the procedure according to the step numbers. All procedures are

written under the assumption that you are starting operation at the beginning

of the procedure, so you may not need to carry out all the steps in a procedure

when you are changing the settings.

Explanation This section describes the setup items and the limitations regarding the

procedures. It may not give a detailed explanation of the feature. For a detailed

explanation of the feature, see chapter 2.

Character Notations

Hard Key Names and Soft Key Names in Bold Characters

Indicate panel keys that are used in the procedure and soft keys and menu items that appear on the screen.

Unit

k Denotes 1000. Example: 12 kg, 100 kHz

iii

IM AQ1100-01EN

51, 5.2, 6.1, 6.2, 6.3, 7.2, 7.3, 7.4, 12.7, 12.8, 12.9

Index

App

Contents

Conventions Used in This Manual ....................................................................................................ii

Chapter 1 Features

1.1 Overview .......................................................................................................................... 1-1

1.2 Optical Power Meter and Light Source............................................................................. 1-2

1.3 Loss Testing...................................................................................................................... 1-4

1.4 Multicore Loss Testing...................................................................................................... 1-5

1.5 IP Testing (Option)............................................................................................................ 1-6

1.6 Other Features ................................................................................................................. 1-7

Chapter 2 Common Operations

2.1 Key, Rotary Knob, and Arrow Key Operations.................................................................. 2-1

2.2 Entering Strings................................................................................................................ 2-3

Chapter 3 Optical Power Meter

3.1 Making Preparations for Measurements .......................................................................... 3-1

3.2 Setting Optical Power Measurement Conditions and Holding the Display....................... 3-2

3.3 Logging Measured Values and Saving Logged Results................................................... 3-5

3.4 Selecting and Saving Core and Tape Numbers ............................................................. 3-10

Chapter 4 PON Power Meter (-PPM suffix code)

4.1 Making Preparations for Measurements .......................................................................... 4-1

4.2 Setting PON System Optical Power Measurement Conditions and Holding the Display . 4-2

4.3 Selecting and Saving Core and Tape Numbers ............................................................... 4-5

Chapter 5 Light Source

5.1 Producing Measurement Light ......................................................................................... 5-1

5.2 Turning On the Visible Light (Option) ............................................................................... 5-3

Chapter 6 Loss Testing (-SPM and -HPM suffix codes)

6.1 MakingPreparationsandAdjustmentsforLossTesting................................................... 6-1

6.2 Performing an Auto Loss Test........................................................................................... 6-3

6.3 Performing a Loop-Back Loss Test................................................................................... 6-7

Chapter 7 Multicore Loss Testing (-SPM and -HPM suffix codes)

7.1 CreatingNewProjects...................................................................................................... 7-1

7.2 SharingProjects ............................................................................................................... 7-3

7.3 Performing a Multicore Loss Test ..................................................................................... 7-6

7.4 OpticalPowerAdjustment ................................................................................................ 7-8

Chapter 8 Checking Fiber End Faces

8.1 Using Fiber Inspection Probes to View the Status of Optical Fiber End Faces................ 8-1

Chapter 9 IP Testing (Option)

9.1 Performing an IP Test....................................................................................................... 9-1

iv IM AQ1100-01EN

Contents

Chapter 10 File Operation and Printing

10.1 Connecting a USB Storage Medium to the USB Port .................................................... 10-1

10.2 Saving and Loading Data ............................................................................................... 10-2

10.3 Deleting and Copying Files ............................................................................................ 10-5

10.4 Changing File Names..................................................................................................... 10-7

10.5 Creating Folders............................................................................................................. 10-9

10.6 Deleting and Copying Folders ...................................................................................... 10-10

10.7 Initializing the Internal Memory..................................................................................... 10-12

10.8 Printing ......................................................................................................................... 10-13

10.9 Specifying the Items That Are Displayed in the File List............................................... 10-14

Chapter 11 Other Operations

11.1 Configuring the Language, Beep, Start Menu, USB Function, and Screen Color...........11-1

11.2 Configuring Power Save Settings....................................................................................11-2

11.3 Resetting This Instrument to Its Factory Default Settings ...............................................11-3

11.4 Configuring Network Settings (Option)............................................................................11-4

11.5 Restricting Operations.....................................................................................................11-6

Chapter 12 Troubleshooting, Maintenance, and Inspection

12.1 If a Problem Occurs........................................................................................................ 12-1

12.2 Error Messages .............................................................................................................. 12-2

12.3 Viewing the Product Information..................................................................................... 12-5

12.4 Performing a Self Test .................................................................................................... 12-6

12.5 Updating the Firmware ................................................................................................... 12-7

12.6 Performing a Mechanical Inspection and Checking Operations..................................... 12-8

12.7 Replacing the Battery Pack ............................................................................................ 12-9

12.8 Replacing an Optical Adapter....................................................................................... 12-12

12.9 Routine Maintenance ................................................................................................... 12-14

12.10 Storage Precautions..................................................................................................... 12-15

12.11 Recommended Replacement Parts ............................................................................. 12-16

12.12 Calibration .................................................................................................................... 12-17

Appendix

Appendix 1 Data File Formats...............................................................................................App-1

Index

1-1

IM AQ1100-01EN

Features

Index

App

1.1 Overview

This instrument is an OLTS (Optical Loss Test Set) with the features listed below. It is used in the

optical fiber and line installation and maintenance servicing of access networks, which link telephone

exchanges and service providers with subscribers, and user networks, which enable communication

within a corporation or building.

• Opticalpowermeter

• Loss-measurementlightsourceandvisiblelightsource

• Lossmeasurementthatmakesuseofitslightsourceandopticalpowermeterfeatures(losstest).

• Efficientmulticorelosstestingformeasuringlossinmulticorefibers

• SimpleIPtestingthroughpinging(option)

Optical fiber

Telephone exchanges

Measurement in

cable installations

AQ1100A/

AQ1100B/

AQ1100D

Consumer

Corporate user

Chapter 1 Features

1-2 IM AQ1100-01EN

1.2 Optical Power Meter and Light Source

Optical Power Meter

The three instrument types listed below are available for measuring different types of optical power.

Suffix Code Optical Power Type

-SPM Standard

-HPM High input

-PPM PON (passive optical network)

If you are using this instrument to measure optical power, the various settings listed below can be

configured.

Item Models with -SPM or

-HPM Suffix Codes

Models with -PPM Suffix Codes

Normal power meter

selected

PON power meter

selected

Wavelength Yes Fixed10, 11 Fixed10, 11

Wavelength mode1Yes — —

Modulation mode2Yes — —

Unit Yes (dB, dBm, W) Yes (dB, dBm, W) Yes (dBm, W)

Reference3Yes Yes —

Measured value display hold Yes Yes Yes

Measured value logging Yes Yes —

Zero set4Yes Yes Yes

Average count5Yes Yes Yes

Maximum and minimum value

display6Yes Yes —

Interlocking of light source and

optical power meter settings7Yes Yes —

Offset8Yes Yes Yes

Threshold9Yes Yes Yes

Measurement of the optical

power from ONU to OLT for a

particular signal wavelength10

— — Yes

Measurement of the optical

power from OLT to ONU for a

particular signal wavelength11

— — Yes

Yes: Can be set or executed, —: Not available

1 Wavelengths can be set with the wavelength mode set to Simple, Detail, or CWDM.

•Simple: You can select from a list of preset wavelengths.

•Detail: You can set the wavelength to a value from 800 to 1700 nm in 1 nm steps.

•CWDM: You can set the wavelength to a value from 1270 to 1610 nm in 20 nm steps along the CWDM

wavelength grid.

2 You can select the modulation frequency of the incident rays from a list of presets. You can also select CW

(continuous).

3 You can make the displayed measured value the reference and display subsequent measured values as

relative values.

4Youcanadjusttheinternaldeviationoftheopticalpowermeasurementsectionandobtainmoreaccurate

absolute optical power values.

5 You can display averaged measured values.

6 You can display the maximum and minimum measured values.

7 You can interlock the light source and optical power meter settings when you connect an optical fiber

between the light source port of an AQ1100A, AQ1100B, or AQ1100D and the optical power measurement

port of another AQ1100A, AQ1100B, or AQ1100D.

8 You can add a specified value (the offset value) to measured optical power values.

9 You can set upper and lower threshold values and determine whether or not the measured values fall within

them.

10 You can measure the optical power of an upstream signal from the ONU (optical network unit: the user’s

optical terminal) to the OLT (optical line termination: the telephone exchange’s optical terminal). The optical

power of the 1310 nm (data wavelength) signal is measured.

11 You can measure the optical power of downstream signals from the OLT to the ONU. The optical power of

the 1490 nm (data wavelength) and 1550 nm (video wavelength) signals is measured.

1-3

IM AQ1100-01EN

Features

Index

App

Loss Measurement Light Source

Three instrument models, with the measurement light wavelengths listed below, are available for

different applications.

Model Measurement Light Wavelength

AQ1100A SM 1310 nm, SM 1550 nm

AQ1100B SM 1310 nm, SM 1550 nm, SM 1625 nm

AQ1100D GI 850 nm, GI 1300 nm, SM 1310 nm, SM 1550 nm

You can produce continuous light or light that has been modulated at the selected frequency (modulation

mode).

Visible Light Source (Optional)

The visible light source is available on models with the /VLS option.

You can produce visible light to visually identify breaks in the optical fiber under test. You can turn the

visible light on and off independently of the measurement light source.

1.2 Optical Power Meter and Light Source

1-4 IM AQ1100-01EN

1.3 Loss Testing

Optical fiber and optical line degradation can be measured easily.

You can measure optical loss with models with -SPM or -HPM suffix codes.

Auto Loss Testing (Using one AQ1100A, AQ1100B, or AQ1100D as

the light source and another as the optical power meter)

Using this instrument as a light source and optical power meter, you can easily measure optical fiber

and line degradation.

Light Source

You can set up to three measurement light wavelengths and produce them in order. You can

produceaconstantleveloflightifyouusetheopticalpoweradjustmentfeature.

Optical Power Meter

This instrument automatically identifies the measurement light from this instrument that it is

connected to and measures the optical power.

• Thefollowingitemscanbespecifiedorexecuted.Fordetailsabouttheseitems,seesection1.2.

The unit, reference, offset, and threshold values can be specified.

The zero set and measured value display hold operations can be executed.

• Youcanattachfiber information to the measured values and save them.*

* Because this instrument is capable of identifying optical fiber and line cores, it is possible to number cores

and tapes.

Light source

(AQ1100A/AQ1100B/AQ1100D)

Light source

port

Optical power meter

(AQ1100A/AQ1100B/AQ1100D)

Optical power

measurement

port

Fiber under

loss test

Loop-Back Loss Test (Using one AQ1100A, AQ1100B, or AQ1100D)

You can use the light source and optical power meter features on a single AQ1100A, AQ1100B, or

AQ1100D to perform a loop-back loss test on an optical fiber or line. To perform loss testing, connect

one end of the fiber that you need to perform loss testing on to this instrument light source port, and

connect the other end to the optical power measurement port of the same AQ1100A, AQ1100B, or

AQ1100D.

Light source

port

Optical power

measurement

port

Fiber under loss test

Light source and Optical power meter

(

AQ1100A/AQ1100B/AQ1100D

)

1-5

IM AQ1100-01EN

Features

Index

App

1.4 Multicore Loss Testing

Multicore optical fiber and optical line degradation can be measured efficiently.

You can measure optical loss with models with -SPM or -HPM suffix codes.

Master and Slave

Connect two AQ1100s and specify the optical power meter as the master and the light source as the

slave. You can also use the AQ1200 multi-field tester series instead of this instrument as the master or

slave.

Specifying the Optical Communication Fiber

 Totransfer,betweenthemasterandslave,projectsetupinformationandinformationaboutthefiber

under loss test, you must specify a fiber from the multicore optical fiber to use for communication.

Connect one end of the optical communication fiber to the master’s light source port (optical port 2),

and connect the other end to the slave’s optical power measurement port (optical port 1).

Information That Is Transferred from Master to Slave

The following information can be transferred through the optical communication fiber from the

master to the slave.

• Projectinformation(seebelowforfurtherdetails)

• Losstestresults*

* Each time that the selected fiber’s loss test finishes, that fiber’s loss test result is automatically transferred.

Connecting the Optical Fiber under Loss Test

All fibers other than the optical communication fiber can be tested. For each optical fiber under

loss test, connect one end to the master’s optical power measurement port, and connect the other

end to the slave’s light source port. The core and tape numbers of the fibers under loss test are

transferred from the master to the slave.

Master

(AQ1100A/AQ1100B/AQ1100D)

Light source port

(optical port 2)

Optical power

measurement port

Slave

(AQ1100A/AQ1100B/AQ1100D)

Light source port

Fiber under

loss test

Communication fiber Optical power

measurement port

(optical port 1)

Executing a Loss Test

Transmit light from the slave. The master will automatically identify up to three different wavelengths

in the light from the slave and measure the optical power. Continue the loss test, switching the cores

between the master and the slave in order.

Projects

Youcancreateprojectswiththemaster.Youcanspecifythefollowingprojectinformation:

 Theprojectname,thenumberofthecoretostartlosstestingat,thetapenumbertype,thenumber

of cores, and the transmitted or measured measurement light wavelengths (up to 3).

• Youcantransferprojectsfromthemastertotheslaveandshareinformation.

• Whenthemasterandtheslaveshareaprojectandusethatprojecttoperformlosstesting,iftesting

is stopped, the data up to the stop point is saved and you can begin testing again from the next

core.

• YoucansaveandloadprojectsasCSVfiles.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Equipo de prueba de YOKOGAWA

YOKOGAWA

YOKOGAWA CA51 HANDY CAL Manual de usuario

YOKOGAWA

YOKOGAWA CA150 Manual de usuario

YOKOGAWA

YOKOGAWA HANDY CAL CA51 Manual de usuario

YOKOGAWA

YOKOGAWA DL716 Manual de usuario

YOKOGAWA

YOKOGAWA DLM4038 Manual de usuario

YOKOGAWA

YOKOGAWA DL7200 Manual de usuario

YOKOGAWA

YOKOGAWA AQ1210 Series Manual de usuario

YOKOGAWA

YOKOGAWA MY600 Manual de usuario

YOKOGAWA

YOKOGAWA DL7440 Manual de usuario

YOKOGAWA

YOKOGAWA ScopeCorder DL950 Manual de usuario

YOKOGAWA

YOKOGAWA MY10 Manual de usuario

YOKOGAWA

YOKOGAWA 30032A Manual de usuario

YOKOGAWA

YOKOGAWA AQ1301 Manual de usuario

YOKOGAWA

YOKOGAWA CA330 Manual de usuario

YOKOGAWA

YOKOGAWA 90020B Manual de usuario

YOKOGAWA

YOKOGAWA 30032A Manual de usuario

YOKOGAWA

YOKOGAWA DL9040 Series Manual de usuario

YOKOGAWA

YOKOGAWA 709830 Manual de usuario

YOKOGAWA

YOKOGAWA CA500 Manual de usuario

YOKOGAWA

YOKOGAWA CA11E Manual de usuario

YOKOGAWA

YOKOGAWA 2560A Manual de usuario

YOKOGAWA

YOKOGAWA 240413 Manual de usuario

YOKOGAWA

YOKOGAWA DLM2000 Series Manual de usuario

YOKOGAWA

YOKOGAWA 720930 Manual de usuario

Manuales populares de Equipo de prueba de otras marcas

SMART

SMART KANAAD SBT XTREME 3G Series Manual de usuario

Agilent Technologies

Agilent Technologies BERT Serial Manual de usuario

Agilent Technologies

Agilent Technologies N3280A Manual de usuario

Vernier

Vernier Go Direct Voltage Manual de usuario

Lifeloc

Lifeloc R.A.D.A.R. Manual de usuario

Fluke

Fluke T5-600 Instrucciones de funcionamiento e instalación

Mercury

Mercury TSL01 Manual de usuario

MAHA

MAHA MBT Series Manual de usuario

Fuji Electric

Fuji Electric P-61 Manual de usuario

ETC

ETC SealerAtor Manual de usuario

Skyfine

Skyfine ETHYWAY V2 Manual de usuario

Appion

Appion G5 Twin Manual de usuario

PCB Piezotronics

PCB Piezotronics 8159-0112A Manual de usuario

BW Technologies

BW Technologies MicroDock II Manual de usuario

Sun Nuclear

Sun Nuclear 1027 Manual de usuario

Biomark

Biomark HPR LITE READER Manual de usuario

Hioki

Hioki 3169-20 Manual de usuario

Ashcroft

Ashcroft ATE-100 Manual de usuario