Yeti SMARTBENCH V1.1 Manual de usuario

Quick Start

Guide

Tel No: +44 1275 217060 | Email: support@yetitool.com

SMARTBENCH V1.1

EU Declaration of Conformity

We, Yeti Tool Limited

of Unit 1 Westfield Court, Barnes Ground, Clevedon, Bristol. BS21 6FQ UK

declare under our sole responsibility that the product(s):

Product Name

SmartBench

Model

Number(s)

SmartBench V1.1

Part Number(s)

20731, 20732, 20733

to which this declaration relates is(are) in conformity with the essential requirements and other relevant

requirements of EU Directive 2006/42/EC (MD),EU Directive 2014/53/EU (RED) and EU Directive 2011/65/EU

(RoHS2).

Type

Essential Requirements

Health & Safety

(RED article 3.1a)

EN 62368-1:2014

EN 60950-1:2006+A1:2010+A12:2011+A2:2013

EN 62311:2008

EN 62061:2005

EN ISO 19085-1:2017

EMC

(RED article 3.1b)

ETSI EN 301 489-1 V2.1.1 (2017-02)

in accordance with the specific requirements of:

ETSI EN 301 489-17 V3.1.1 (2017-02)

EN 55032:2012/AC:2013 Class A

EN 55035:2017

EN 61000-3-2:2014

EN 61000-3-3:2013

Spectrum

(RED article 3.2)

ETSI EN 300 328 V2.1.1 (2016-11)

ETSI EN 301 893 V1.8.1 (2015-03)

RoHS2

EN 50581:2012

Tel No: +44 1275 217060 | Email: support@yetitool.com

SMARTBENCH V1.1

United Kingdom 18th February 2019

Authorised signature for and on behalf of

Yeti Tool Limited

Ed Sells - Director

IMPORTANT

This is a class 1 machine: It’s power supply MUST be earthed. Only use the power cable

supplied. If you require a replacement, please contact your place of purchase.

European Representative:

Yeti Tool Limited

Unit 1 Westfield Court

Barnes Ground

Clevedon

Bristol

BS21 6FQ

United Kingdom

Tel: +44 1275 217060

Tel No: +44 1275 217060 | Email: support@yetitool.com

SMARTBENCH V1.1

Thank you for purchasing SmartBench!

Now that the large format, mobile CNC routing is unleashed, we hope you have a lot of fun

with your future projects. Please let us know how you get on - we are always keen to

receive feedback and follow what SmartBench creates!

What’s in the box

Start by getting familiar with SmartBench’s key components.

Check the contents. If any of the above items are damaged or missing, please contact your

point of purchase immediately.

Box 1

1 x Z Head assembly

1 x Console

Box 3

2x Leg Set

1 x IEC Power lead

1 x Extraction power lead

1x USB Stick

1x Tool kit (17/22mm spanner and 6mm

hex)

1x Wheel setting tool

Box 2

1x X Upper Beam

1x X Lower Beam

1x Y Bench

Tel No: +44 1275 217060 | Email: support@yetitool.com

SMARTBENCH V1.1

Key components

Figure 1: Y Bench

Figure 2: Z Head

Figure 3: Leg Set (x2)

Figure 4: Console

Figure 5: X Beam Upper

Figure 6: X Beam Lower

Tel No: +44 1275 217060 | Email: support@yetitool.com

SMARTBENCH V1.1

Fit Leg Set 1 –Opposite from Home End

Identify the home end of the Y Bench

(Figure 1, page 4) by looking for the Home Icon.

At the opposite end of the bench, fit Leg Set 1 by

first unfolding the legs.

Lift the Y Bench to accept the location pins of the

Leg Set. Slide the leg clamp pins into the slots in

the Y Bench end plate.

Push the clamp handles down flat to the Y Bench

end plate to tighten.

Tel No: +44 1275 217060 | Email: support@yetitool.com

SMARTBENCH V1.1

Fit the X Beam Lower

Unfold a Leg Set. Lift the Y Bench at the home end.

Use the leg set to support the Y bench. This should

be just past the first crossbeam.

To fit the X Beam Lower, offer up the beam

ensuring the home labels are aligned.

Ensuring the wheels are aligned with the channels,

push the X Beam Lower onto the Y bench.

You should feel some preload on the wheels as

they pop into place.

Push the X Beam Lower onto the Y Bench. The

assembly should look like this.

Tel No: +44 1275 217060 | Email: support@yetitool.com

SMARTBENCH V1.1

Fit Leg Set 2

Lift the Y Bench by the end plate, and take Leg set

2 with the other hand.

Lift the Y Bench to accept the location pins of the

Leg Set. Slide the leg clamp pins into the slots in

the Y Bench end plate.

Push the clamp handles down flat to the Y Bench

end plate to tighten.

Push the clamp handles down flat to the Y Bench

end plate to tighten.

Tel No: +44 1275 217060 | Email: support@yetitool.com

SMARTBENCH V1.1

Attach the X Beam Upper

Slide the X Beam Upper onto the lower X Beam

Lower as shown above.

The forks on the end of the X Beam Upper should

slide on the skids of the X Beam Lower with very

little force.

Secure in place by tightening the clamps on each

end of the beam.

Slide the cables by the drag chain latch plate so

that they are laid flat and extend from the end of

the X Beam Upper

Tel No: +44 1275 217060 | Email: support@yetitool.com

SMARTBENCH V1.1

Fit the Z Head

To Fit the Z Head, offer up the Z head ensuring

the extraction elbow is facing towards you.

Load the Z head by inserting the wheels into

the channels until the Z head holds onto the

beam. This should be just passed the first

wheel.

Place the drag chain latch plate over the

protruding face on the side of the Z Head

bottom plate ensuring the signal cable seats

into the recess.

Secure this in place with the thrubmscrew

provided.

Plug in the signal cable and secrure with the

thumbscrew.

Place the drag chain latch plate over the

protruding face on the side of the Z Head.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Manuales populares de Fresadora de madera de otras marcas

Stanley

Stanley SRR1200-RU Manual de usuario

Wolfcraft

Wolfcraft MASTER RT 540 Manual de usuario

Worx Professional

Worx Professional WU600 Manual de usuario

Proxxon

Proxxon BFW 40/E Manual de usuario

Porter-Cable

Porter-Cable 893PK Manual de usuario

Ryobi

Ryobi R181D Manual de usuario

Clarke

Clarke Contractor CR3 Manual de instrucciones

Vision Engraving & Routing Systems

Vision Engraving & Routing Systems 1624R Manual de usuario

Triton

Triton TMNRTR Instrucciones de montaje

Status

Status RH1800 Manual de usuario

Asist

Asist AE4F120DN Manual de usuario

Sealey

Sealey SV20 Series Manual de usuario

Makita

Makita 3606 Manual de usuario

RIDGID

RIDGID R2901 Manual de usuario

Hitachi Koki

Hitachi Koki M 12V2 Manual de usuario

Promaker

Promaker PRO-RT1600 Manual de usuario

Wen

Wen RT1460 Manual de usuario

Mafell

Mafell LO 50 E Guía