YASKAWA SI-EN3 Manual de usuario

EtherNet/IP通信

安川インバータ1000シリーズオプション

取扱説明書

形式 SI-EN3

EtherNet/IP

YASKAWA AC Drive 1000-Series Option

Installation Manual

Type: SI-EN3

To properly use the product, read this manual thoroughly and retain

for easy reference, inspection, and maintenance. Ensure the end user

receives this manual.

製品を安全にお使い頂くために，本書を必ずお読みください。

また，本書をお手元に保管していただくとともに，最終的に本製品をご使用になる

ユーザー様のお手元に確実に届けられるよう，お取り計らい願います。

COSMOS（140×182）（和英併記）新CI 改版<1>2011.8

MANUAL NO. TOBP C730600 58B

2YASKAWA ELECTRIC TOBP C730600 58B 1000-Series Option SI-EN3 Installation Manual

transmitted, in any form or by any means, mechanical, electronic, photocopying, recording, or otherwise,

without the prior written permission of Yaskawa. No patent liability is assumed with respect to the use of the

information contained herein. Moreover, because Yaskawa is constantly striving to improve its high-quality

products, the information contained in this manual is subject to change without notice. Every precaution has

been taken in the preparation of this manual. Yaskawa assumes no responsibility for errors or omissions.

Neither is any liability assumed for damages resulting from the use of the information contained in this

publication.

EtherNet_IM_E_conditional.fm 2 ページ２０１２年１０月３１日　水曜日　午後１２時５３分

YASKAWA ELECTRIC TOBP C730600 58B 1000-Series Option SI-EN3 Installation Manual 3

Table of Contents

1 PREFACE AND SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2 PRODUCT OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

3 RECEIVING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

4 OPTION COMPONENTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

5 INSTALLATION PROCEDURE . . . . . . . . . . . . . . . . . . . . . . .14

6 RELATED DRIVE PARAMETERS . . . . . . . . . . . . . . . . . . . . 32

7 CONFIGURING MESSAGING. . . . . . . . . . . . . . . . . . . . . . . .36

8 OUTPUT ASSEMBLIES (DRIVE CONSUMES) . . . . . . . . . .37

9 INPUT ASSEMBLIES (DRIVE PRODUCES) . . . . . . . . . . . .39

10 WEB INTERFACE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

11 TROUBLESHOOTING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

12 SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

EtherNet_IM_E_conditional.fm 3 ページ２０１２年１０月３１日　水曜日　午後１２時５３分

4 YASKAWA ELECTRIC TOBP C730600 58B 1000-Series Option SI-EN3 Installation Manual

1 Preface and Safety

Yaskawa manufactures products used as components in a wide variety of industrial systems

and equipment. The selection and application of Yaskawa products remain the responsibility

of the equipment manufacturer or end user. Yaskawa accepts no responsibility for the way its

products are incorporated into the final system design. Under no circumstances should any

Yaskawa product be incorporated into any product or design as the exclusive or sole safety

control. Without exception, all controls should be designed to detect faults dynamically and

fail safely under all circumstances. All systems or equipment designed to incorporate a

product manufactured by Yaskawa must be supplied to the end user with appropriate

warnings and instructions as to the safe use and operation of that part. Any warnings

provided by Yaskawa must be promptly provided to the end user. Yaskawa offers an express

warranty only as to the quality of its products in conforming to standards and specifications

published in the Yaskawa manual. NO OTHER WARRANTY, EXPRESS OR IMPLIED, IS

OFFERED. Yaskawa assumes no liability for any personal injury, property damage, losses,

or claims arising from misapplication of its products.

◆Applicable Documentation

The following manuals are available for the SI-EN3 option:

SI-EN3 Option

Yaskawa AC Drive

1000-Series Option

SI-EN3 EtherNet/IP

Installation Manual

Manual No: TOBP C730600 58

(This book)

Read this manual first.

The installation manual is packaged with the

option and contains information required to

install the option and set up related drive

parameters.

Yaskawa AC Drive

1000-Series Option

SI-EN3 EtherNet/IP

Technical Manual

Manual No: SIEP C730600 58

The technical manual contains detailed

information about the option. Access the

following sites to obtain the technical manual:

U.S.: http://www.yaskawa.com

Europe: http://www.yaskawa.eu.com

Japan: http://www.e-mechatronics.com

For questions, contact your local Yaskawa

sales office or the nearest Yaskawa

representative.

EtherNet_IM_E_conditional.fm 4 ページ２０１２年１０月３１日　水曜日　午後１２時５３分

1 Preface and Safety

YASKAWA ELECTRIC TOBP C730600 58B 1000-Series Option SI-EN3 Installation Manual 5

◆Terms

◆Registered Trademarks

• EtherNet/IP is a trademark of the ODVA.

• All trademarks are the property of their respective owners.

Yaskawa Drive

Yaskawa AC Drive

1000-Series

Quick Start Guide

The drive manuals cover basic installation, wiring, operation

procedures, functions, troubleshooting, and maintenance

information.

The manuals also include important information about

parameter settings and drive tuning.

Access these sites to obtain Yaskawa instruction manuals:

U.S.: http://www.yaskawa.com

Europe: http://www.yaskawa.eu.com

Japan: http://www.e-mechatronics.com

For questions, contact your local Yaskawa sales office or the

nearest Yaskawa representative.

Yaskawa AC Drive

1000-Series

Technical Manual

Note: Indicates supplemental information that is not related to safety messages.

Drive: Yaskawa AC Drive 1000-Series

Option: Yaskawa AC Drive 1000-Series Option SI-EN3 EtherNet/IP

EtherNet_IM_E_conditional.fm 5 ページ２０１２年１０月３１日　水曜日　午後１２時５３分

1 Preface and Safety

6YASKAWA ELECTRIC TOBP C730600 58B 1000-Series Option SI-EN3 Installation Manual

◆Supplemental Safety Information

Read and understand this manual before installing, operating, or servicing this option. The

option must be installed according to this manual and local codes.

The following conventions are used to indicate safety messages in this manual. Failure to

heed these messages could result in serious or possibly even fatal injury or damage to the

products or to related equipment and systems.

DANGER

Indicates a hazardous situation, which, if not avoided, will result in death or serious

injury.

WARNING

Indicates a hazardous situation, which, if not avoided, could result in death or

serious injury.

CAUTION

Indicates a hazardous situation, which, if not avoided, could result in minor or

moderate injury.

NOTICE

Indicates an equipment damage message.

EtherNet_IM_E_conditional.fm 6 ページ２０１２年１０月３１日　水曜日　午後１２時５３分

1 Preface and Safety

YASKAWA ELECTRIC TOBP C730600 58B 1000-Series Option SI-EN3 Installation Manual 7

■General Safety

General Precautions

• The diagrams in this section may include options and drives without covers or safety shields to illustrate details. Be

sure to reinstall covers or shields before operating any devices. The option should be used according to the

instructions described in this manual.

• Any illustrations, photographs, or examples used in this manual are provided as examples only and may not apply

to all products to which this manual is applicable.

• The products and specifications described in this manual or the content and presentation of the manual may be

changed without notice to improve the product and/or the manual.

• When ordering new copies of the manual, contact a Yaskawa representative or the nearest Yaskawa sales office and

provide the manual number shown on the front cover.

DANGER

Heed the safety messages in this manual.

Failure to comply will result in death or serious injury.

The operator is responsible for injuries or equipment damage caused from failure to heed

the warnings in the manual.

NOTICE

Do not expose the drive or the option to halogen group disinfectants.

Failure to comply may cause damage to the electrical components in the option.

Do not pack the drive in wooden materials that have been fumigated or sterilized.

Do not sterilize the entire package after the product is packed.

Do not modify the drive or option circuitry.

Failure to comply could result in damage to the drive or option and will void warranty.

Yaskawa is not responsible for any modification of the product made by the user. This

product must not be modified.

EtherNet_IM_E_conditional.fm 7 ページ２０１２年１０月３１日　水曜日　午後１２時５３分

8 YASKAWA ELECTRIC TOBP C730600 58B 1000-Series Option SI-EN3 Installation Manual

2 Product Overview

◆About This Product

The option provides a communications connection between the drive and an ODVA

EtherNet/IP network. The option connects the drive to an EtherNet/IP network and

facilitates the exchange of data.

This manual explains the handling, installation and specifications of this product.

EtherNet/IP is a communications link to connect industrial devices (such as smart motor

controllers, operator interfaces, and variable frequency drives) as well as control devices

(such as programmable controllers and computers) to a network. EtherNet/IP is a simple,

networking solution that reduces the cost and time to wire and install factory automation

devices, while providing interchangeability of like components from multiple vendors.

EtherNet/IP is an open device network standard.

By installing the option to a drive, it is possible to do the following from an EtherNet/IP

master device:

• drive operation

• drive operation status monitoring

• changing parameter settings.

◆Applicable Models

The option can be used with the drive models in Table 1.

Table 1 Applicable Models

Drive Series Drive Model Number Software Version <1>

<1> See “PRG” on the drive nameplate for the software version number.

A1000

CIMR-A2A ≥1010

CIMR-A4A0002 to 4A0675 ≥1010

CIMR-A4A0930 and 4A1200 301

CIMR-A5A 504

Z1000 CIMR-ZA ≥1014

EtherNet_IM_E_conditional.fm 8 ページ２０１２年１０月３１日　水曜日　午後１２時５３分

YASKAWA ELECTRIC TOBP C730600 58B 1000-Series Option SI-EN3 Installation Manual 9

3 Receiving

Please perform the following tasks upon receipt of the option:

• Inspect the option for damage. Contact the shipper immediately if the option appears

damaged upon receipt.

• Verify receipt of the correct model by checking the model number printed on the name

plate of the option package.

• Contact your supplier if you have received the wrong model or the option does not

function properly.

◆Option Package Components

Table 2 Option Package Contents

◆Tools Required for Installation

• A Phillips screwdriver (M3 metric/#1, #2 U.S. standard size <1>) is required to install the

option and remove drive front covers.

• Diagonal cutting pliers. (required for some drive models)

• A small file or medium grit sandpaper. (required for certain drive models)

Note: Tools required to prepare option networking cables for wiring are not listed in this manual.

Description: Option Ground

Wire Screws (M3) LED Label Installation Manual

Quantity: 113 1 1

<1> Screw sizes vary by drive capacity. Select a screwdriver appropriate for the drive capacity.

NS MS

MANUAL

EtherNet_IM_E_conditional.fm 9 ページ２０１２年１０月３１日　水曜日　午後１２時５３分

10 YASKAWA ELECTRIC TOBP C730600 58B 1000-Series Option SI-EN3 Installation Manual

4 Option Components

◆SI-EN3 Option

Figure 1

Figure 1 SI-EN3 Option Components

A – Connector (CN5)

<1> The ground wire provided in the option shipping package must be connected during installation

<2> Refer to Option LED Display on page 12 for details on the LEDs

E – Ground terminal and installation hole <1>

B – Installation hole F – Communication connector CN1 (RJ45)

C – LED (MS) <2> G – LED (LINK/ACT) <2>

D–LED(NS)<2> H – LED (10/100) <2>

Underside

D C

EtherNet_IM_E_conditional.fm 10 ページ２０１２年１１月５日　月曜日　午前１１時３９分

Otros manuales para SI-EN3

Tabla de contenidos

Otros manuales de Accionamiento de CC de YASKAWA

YASKAWA

YASKAWA CM093 Manual de usuario

YASKAWA

YASKAWA P1000 Instrucciones de instalación

YASKAWA

YASKAWA S-7 Series Instrucciones de instalación

YASKAWA

YASKAWA LA500 Manual de usuario

YASKAWA

YASKAWA Drive-V1000 Manual de usuario

YASKAWA

YASKAWA J1000 CIMR-JC series Manual de usuario

YASKAWA

YASKAWA SGDV Manual de usuario

YASKAWA

YASKAWA Z1000 CIMR-ZU*A Series Guía de configuración

YASKAWA

YASKAWA GA800 Series Manual de uso y cuidado

YASKAWA

YASKAWA DeviceNet SI-N3 Manual de usuario

YASKAWA

YASKAWA HV600 Manual de usuario

YASKAWA

YASKAWA VS-616PS5 Series Manual de instrucciones

YASKAWA

YASKAWA SI-EN3D Manual de usuario

YASKAWA

YASKAWA VS-616PS5 Series Manual del propietario

YASKAWA

YASKAWA Varispeed f7 Manual de usuario

YASKAWA

YASKAWA SI-S3/V Series Manual de usuario

YASKAWA

YASKAWA P1000 Manual de usuario

YASKAWA

YASKAWA CIMR-E7U Series Manual de usuario

YASKAWA

YASKAWA CIMR-V7AM Manual de usuario

YASKAWA

YASKAWA V1000 MMD Manual de usuario

YASKAWA

YASKAWA GA800 Series Instrucciones de funcionamiento

YASKAWA

YASKAWA GA800 Series Manual de usuario

YASKAWA

YASKAWA CC-Link SI-C3 Manual de usuario

YASKAWA

YASKAWA JOHB-SMP3 Manual de usuario

Manuales populares de Accionamiento de CC de otras marcas

Vincent Associates

Vincent Associates UNIBLITZ ED12DSS Manual de usuario

EKSMA OPTICS

EKSMA OPTICS DQ-100-4 Manual de lista de piezas

Chamberlain Garog

Chamberlain Garog D Series Manual de usuario

Parker

Parker PDS Series Manual de usuario

Festo

Festo DGC G Series Guía de configuración

Binks

Binks QS-5012-1-CE Manual de usuario

Danfoss

Danfoss VLT 2800 Series Hoja de especificaciones

ABB

ABB ACQ580-01 Series Manual de instalación

GE D20A6 Manual de usuario

Unex

Unex MC-D-250-1000-050W-TW Manual de usuario

Geckodrive

Geckodrive G213V Manual de usuario

ABB

ABB RSYC-01 Manual de usuario

Rockwell Automation

Rockwell Automation PowerFlex 700S Manual del propietario

WEG

WEG DeviceNet CFW500 Manual de usuario

Siemens

Siemens SINAMICS G Hoja de datos

Siemens

Siemens SINAMICS SM150 6SL3815-7NP41-0AA1 Instrucciones de funcionamiento

SOMFY

SOMFY JR RU 30 Manual de usuario

Beckhoff

Beckhoff AX8911 Manual del operador