Yarvik PMP200 Manual de usuario
Joy Media Player 4 GB
PMP200
PMP201
PMP202
PMP204
English version
Deutsche Version
Nederlandse versie
Version Française
Versión Española
Wersja polska
Česká verze
Slovenská verzia
Versão Portuguesa
1x1x
Please visit our website for CE declaration: www.yarvik.com
1x
1x
USB port
100%
4Hours
10%
Please visit our website for CE declaration: www.yarvik.com
MVOL
ON OFF
1.
2.
USB
100%
ON OFF
2. 3.
1.
Englisch
• Power Indicator
When the device is fully charged the power
indicator is full.
When the power indicator is empty, the
battery is discharged and must be charged
before the next use.
During charging, the player must be turned
on. Otherwise it can not be charged nor can
it be detected by your computer. Turn the
player off when not in use.
During charging, do not disconnect the USB
cable. The player may remain in USB mode.
When nished charging, exit USB mode by
disconnecting the USB cable.
Basic functions
Turning the player ON and OFF
You can turn the player ON and OFF by holding
the “play/pause” button.
Button functions
1. “PLAY” button: Play, Pause/ Stop
(press button)
2. “M” button: Selection, Enter menu
(press button)
3 “NEXT” button: Next in menu/le, Track,
Fast forward (press button)
4. “PRE” button: Previous in menu/le, Track,
Fast reverse (press button)
5. “O” button: Increase or reduce volume
(press button)
Enter menu
Enter all menus by pressing “M” on the keypad.
The menu includes a main menu and
sub-menus.
Main menu: Hold “M” to enter.
Sub-menu: Press “M” to enter.
Explanation of button operation
Buttons can be operated in two ways:
“Press” means press and release immediately.
“Hold” means press and continue pressing until
the desired action occurs.
Playing music
• Brief operation
1. Plug earphones into the earphone jack of
the PMP200.
2. Turn on the player, enter “MUSIC” mode, and
press “PLAY” to start playback.
3.
“PRE” button: To select the previous track/song.
“NEXT” button: To select the next track/song.
4. Volume adjustment:
Press “VOL” button.
Press “PRE” button to decrease volume.
Press “NEXT” button to increase volume.
5. Repeat play setting: Durng playback, pressing
the “M” button will enter the submenu for
repeat play; it includes seven selections:
Normal, Repeat one, Folder, Repeat folder,
Repeat all, Random, Intro.
Selection mode, which includes seven modes:
Natural, Rock, Pop, Classic, Soft, Jazz, DBB.
• Playing speed (Play submenu)
When playing music (only applies to MP3 les),
you can choose different play speeds (such as
fast or slow), but the voice will not change:
In play mode:
1. Press “M” to enter the play sub-menu.
2. Press “Next” to enter the “Display speed”
menu.
3. Press “M” to enter the “Display speed” menu.
4. Press “Next” to increase the playback speed;
press “PRE” to reduce the playback speed.
Attention:
Once the playback speed is set, this will affect
every song until it is changed again.
• Repeat mode (Play submenu)
1. Please refer to the following descriptions.
2. Enter through the play submenu.
• Synchronised lyrics display
The PMP200 supports the use of “*.Irc” lyric
les for synchronised lyrics display when
playing music.
How to use the lyrics le:
The song and lyric le must have the same name.
For example:
The song le name is xxx.MP3
The lyric le name should be xxx.LRC
If the song le has a matching lyric le,
the lyrics will be shown automatically when
the song is played.
What happens when an .LRC le is played
back?
1. The matching lyrics le is found. The red dot
at the bottom of the screen turns green.
2. Press “M” button enter into the lyric interface.
3. Lyrics are shown on the screen.
4. Press the “M” button to return to music
playback mode.
A-B repeat
1. Enter the music playback or recording
playback mode.
2. Press “M” to enter the play submenu.
3. Press “NEXT” to select the “Repeat mode”
menu.
4. Press “M” button enter “Repeat mode”.
Repeat mode: Press the repeat icon “ ” “A”
to set starting point “A”.
5. Press “NEXT” to conrm starting point “A”.
Press the repeat icon “ ” “B” to set ending
point “B”.
6. Press “NEXT” to conrm ending point “B”.
Repeat icon “A-B” xed. This starts repeat
playback between A and B, and it will exit
after reaching the set repeat time.
Press “PRE” to re-conrm starting point “A”.
(For repeat times please refer to “Repeat times”).
In Repeat mode, press “VOL+” or “VOL-” to set
the “Playback speed”.
Playback-after-recording function (does not
work with pre-recorded les)
1. Enter the “A-B” repeat function.
2. Press “NEXT” to enter the playback-after-
recording mode.
3. When the repeat icon “ ” changes to the
playback-after-recording icon “ ”, it begins
to record the user’s voice. The time length is
same as the “A-B” repeat time.
4. When the repeat time is over, it begins to play
the recording. The icon changes to “ ”;
then you can press the “Next” button to enter
the contrast function.
Pressing the “PRE” button while in this func-
tion will take you back to the “A-B” repeat
mode.
In this function, pressing the “PRE” button
takes you back to the “Playback-after-
recording” function.
In any of the three previous functions,
pressing the “M” button will exit the repeat
mode.
• Repeat times (in the play submenu)
For operation please refer to the “Backlight
intensity setting”.
The A-B repeat time determines how many
times the music is repeated before exit.
• Repeat interval (in the play submenu)
For operation please refer to the “Backlight
intensity setting”.
The pause time (in seconds) between the rst
play and second play in repeat mode.
Playing movies
To play movies, you must convert the video to
AMV format. For additional instructions, please
see “Playing music”.
Button functions
“PLAY”: Play/Pause.
“M”: Hold to return to the main menu.
“PRE/NEXT”: Select Previous/Next les.
Hold for fast forward or reverse.
Record
Prior to recording please make sure that the
PMP200 has enough power.
This player supports up to 99 recorded les in
each folder.
• Recording in the “Record mode”
1.
There are two ways to enter the “Record mode”:
In the main menu select “Record” and press
the “M” button to enter repeat mode.
2. Press the “Play” button to start and pause
recording; hold the “Play” button to save the
recording.
The recorded le is saved in the currently
selected content: “Recording stopped
submenu / Main disk content”.
If it shows “Capacity is full” it means no
space is left for saving the recorded les.
In this situation you must remove les to
make some free storage space.
If it shows “Content is full” means there are
99 les in this folder, please store your les
in a different folder.
• Recording type selection
1. Enter the recording interface.
2.
Press the “M” button to enter the Record submenu.
1. Enter the contrast mode. The repeat icon
is shown as “ ”, and the original recording
is played.
Contrast function (does not work with pre-recorded files)
2. After the original track/song is nished, the
icon changes to “ ”, and the user’s recording
is played.
3. Press “NEXT” to choose the “record style”
submenu, and press “M” to enter the menu.
4. Press the “M” button to choose the desired
recording format, and press the “M” button
again to conrm the choice.
The available recording formats are as follows:
Fine Record WAV format. Good
sound quality.
Long Record ACT format. Average
sound quality.
Fine VOR WAV format. Recording
will stop when there is
no voice.
Long VOR ACT format. Recording
will stop when there is
no voice.
5. Press the “Play” button to start recording.
Playback
Playing the recorded les:
1. Enter the main menu.
2. Press “Next” to choose “playback mode”.3.
Press “M” to enter the playback mode
interface.
4. Press “PLAY”again to start playback.
5. Select the recorded les:
“PRE”: Select the previous recorded le.
“NEXT”: Select the next recorded le.
Picture browsing
JPEG browser
• File selection function
After you enter the Picture menu, the following
will be shown:
JPG interface – File list – Selection le 01.jpg.
If there are no les here, the content will be empty.
Press “PLAY” to enter the picture display mode.
Press “NEXT” or “PRE” to choose the les.
Press “M” to enter the submenu. Select the les
as follows:
Local folder/Play set/Delete le/Delete all/Exit.
• Picture display mode
Enter the picture display mode. The following
will appear:
Press “NEXT” or “PRE” to display the next or the
previous picture.
Press “PLAY” to return to le selection mode.
Hold “M” to return to the main menu.
Other buttons are invalid in this mode.
System settings
1. Enter the main menu.
2. Press “NEXT” to choose the “system setting”.
3. Press “M” to enter the submenus.
• List of all the parameters:
Clock Setting time and date
LCD set Setting backlight intensity
Language Setting different languages
Power off Setting the player’s off time and
sleep time
Replay
mode
Setting replay mode: manual
and auto replay
Online
mode
Setting the location
Memory
info
Displays the remaining ash
memory capacity
Firmware
version
Player’s rmware version
Firmware
upgrade
Upgrade the player’s rmware
Exit Exit the current mode
• Detailed operating instructions
A. Clock:
1. Press “M” to enter the system time interface.
2. Press “VOL” from year start setting. The year
number starts blinking.
3. Press “NEXT” or “PRE” button to adjust the
time.
4. Press “M” button to conrm and exit after you
have made the necessary adjustment.
B. LCD setting
1. Brightness
adjustment
Adjust the brightness of the
screen
2. Black screen
mode (0-30)
Shuts off the screen when
the player has not been used
for a certain amount of time
(unit: second)
3. Exit
Notes: “Brightness adjustment” adjusts the bright-
ness of the screen (15 is brightest, 0 is darkest).
Press “PRE” or “NEXT” to move the cursor.
Press “M” to return to the previous menu. “Dark
mode” and “black screen mode”: please refer to
the “Brightness adjustment” setting.
C. Language
Refer to the “EQ mode” setting
D. Power off
Off mode: Here you set a time. When no
button has been pressed for this length of
time, the player will be shut off to save power.
When set to “0” the function is shut off.
Sleep mode: Here you set a time (unit:
seconds) to shut off the player after a certain
amount of time has elapsed. This is intended
for listening to music before you go to sleep.
This setting works one time, and is cleared
when the player shuts off. You must set it
again the next time.
E. Replay mode
For operation refer to the “EQ mode” setting.
Manual replay: You must manually select the
segment for A-B repeat.
Auto reply: The player creates a segment for
A-B repeat (works in English reading mode
without music).
F. Online mode
Three modes are available: Multi-drive,
Normal only, Encrypted only.
G. Memory info
Shows the ash memory’s total capacity
and available space.
H. Firmware version
Shows the player’s rmware version.
Prompt: After you press “M” to nish a set-
ting, you can press “play” to quickly exit the
menu. This works in all menus.
E-book reading (TXT format)
Enter the main interface, press “NEXT” to
choose “E-book”, press “M” to enter the root
directory, and press “NEXT” or “PRE” to choose
the les you want to read. Press “M” to return to
the upper menus.
Note: It is not necessary to select the le if it is
in the root directory.
Reading mode control: To set the play mode
when you reading. It has two modes: manual
playing and auto playing.
Manual playing: Press “NEXT” or “PRE” to turn
pages one at a time.
Auto playing: You can set a time after which the
pages will be turned automatically.
Once you have selected the les, press “M” to
begin reading.
• Select different content (exit the submenu)
The user can put different les into different
folders (the folder should be set up in the
computer). This device supports up to 9
folders and each folder supports a maximum
of 99 les.
1. In the stop
interface
(the example
is in music
playing mode).
2. Press “M”
to enter the
submenu.
3. Press “M” again
to enter the
menu selection
interface.
4. Press “NEXT” or
“PRE” to make
selections in
the menu.
5. Press “M”
to conrm
the selections.
Este manual sirve para los siguientes modelos
3
Tabla de contenidos
Idiomas:
Otros manuales de Reproductor multimedia de Yarvik
