Yard Works 060-3772-0 Manual de usuario
model number 060-3772-0
Please read and understand this manual before beginning
any use or assembly of the product, and make sure all
parts are present.
Questions?
If you have any questions or need replacement parts,
please call our toll-free helpline at 1-866-523-5218.
Instruction
Manual
9-Ton Log Splitter
WO
Date
Artist
PANTONE
000
CTC Generic FLEXO
mm/dd/yy
02
xxxxxx
mm/dd/yy
03
xxxxxx
mm/dd/yy
04
xxxxxx
mm/dd/yy
05
xxxxxx
mm/dd/yy
06
xxxxxx
mm/dd/yy
07
xxxxxx
YW_060_3772_0_9TElectricLogSplitter
978343 AD8343
w01a w01b w02a w02b
12/01/16 12/05/16 12/16/16 12/20/16
PA PA PA PA
LITHO
PANTONE
388
PANTONE
3145
PANTONE
COOL GRAY 11
PROCESS
BLACK
w03a w07a
12/29/16 02/08/17
Cindy Alexa
w09a_YW_060_3772_0_9TElectricLogSplitter_GB.indd 1 2017/3/6 22:26:43
model no. 060-3772-0 | contact us 1.866.523.5218 model no. 060-3772-0 | contact us 1.866.523.5218
2
Table of Contents
Specifications 3
Important Safety Instructions 4
Symbols 6
Parts List 7
Exploded View 10
Parts Location 11
Important Information 12
Before Assembly 13
Assembly 15
Operation 16
Maintenance 21
Storage 23
Troubleshooting 24
Environmental Protection 25
Warranty 25
w09a_YW_060_3772_0_9TElectricLogSplitter_GB.indd 2 2017/3/6 22:26:43
model no. 060-3772-0 | contact us 1.866.523.5218 model no. 060-3772-0 | contact us 1.866.523.5218
3
Specifications
Product Name 9-Ton Log Splitter
Model Number 060-3772-0
Motor 120 V 60 Hz 15 A 1 3/4 HP
Log Capacity (Diameter) 12 1/2" (32 cm)
Log Capacity (Length) 20 1/2" (52 cm)
Splitting Force 9 Tons
Hydraulic Force 20.5 MPa
Hydraulic Oil Capacity 6.3 L
DIMENSIONS
Length 42" (106.6 cm)
Width 11 5/32" (29 cm)
Height 20 3/16" (51.3 cm)
Product Weight 172 lb (78 kg)
NOTE: The log capacity in diameter is only a guideline. A small
log can be difficult to split if it has knots or very tough fibre.
w09a_YW_060_3772_0_9TElectricLogSplitter_GB.indd 3 2017/3/6 22:26:43
model no. 060-3772-0 | contact us 1.866.523.5218 model no. 060-3772-0 | contact us 1.866.523.5218
Important Safety Instructions
4
IMPORTANT! READ AND UNDERSTAND
ALL INSTRUCTIONS.
Failure to follow safety instructions may
result in electric shock, fire, and/or serious
personal injury.
• Read and understand all instructions and
all labels affixed to the log splitter. Learn
the applications, limitations, and specific
potential hazards before using this log
splitter.
PERSONAL SAFETY
• Do not operate the log splitter while under
the influence of drugs, alcohol, or any
medication.
• Stay alert, watch what you are doing, and
use common sense. Do not operate the log
splitter when you are tired.
• Dress properly. Do not wear loose clothing,
neckties, or jewellery that can get caught
and draw you into moving parts. Rubber
gloves and non-skid, steel-toed footwear
should be worn when working with the log
splitter. Wear protective hair covering to
contain long hair and prevent it from getting
caught in the log splitter.
• Always wear safety goggles. The use of a
log splitter can result in foreign objects being
thrown into your eyes which can result in
severe or permanent eye damage. Everyday
eyeglasses only have impact-resistant
lenses; they are not safety glasses.
• Never stand on the log splitter. Never allow
anyone to ride on the machine. Do not
transport anything or anyone on the log
splitter. Serious injury could occur if the
machine is tipped or jarred.
• Do not remove jammed logs using your
hand.
• Keep hands away from moving parts. Do not
place your hands in splits and cracks that
open in the log. They may close suddenly
which could cause severe crushing or
amputation.
• Keep your hands away from the controls
while logs are being loaded and unloaded.
Ensure that the loader and the operator are
positioned in the safe area at the control
end of the log splitter while the log pusher
is moving.
ELECTRICAL SAFETY
• Always unplug the log splitter from the
power supply when it is not in use, and
before making adjustments, changing parts,
cleaning, or servicing the log splitter.
• If an extension cord is needed, make sure
to use a proper extension cord. The cord
should be no longer than 32.5’ (10 m) with a
cross-section of no less than 1/8” (2.5 mm)
and a wire size (A.W.G.) of 12 in order to
allow sufficient flow of electric current to the
motor. An undersized cord may result in loss
of power and overheating.
• Electrical connections must be made with
protected material suitable for outdoor
use. Avoid using loose and inadequately
insulated connections.
• Only use an electrical circuit having
adequate protection and capacity
corresponding to the power, voltage,
and frequency of the log splitter. Ensure
that there is a ground connection and a
regulation differential switch upstream.
• Ground the log splitter. This log splitter is
equipped with an electric cord having an
equipment-grounding conductor and a
grounding pin. Insert the plug to a matching
electrical outlet. Do not modify the plug or
remove the grounding pin.
• Do not touch the metal prongs of the electric
cord plug when inserting or removing the
plug from an electrical outlet. Prevent body
contact with grounded surfaces such as
pipes, radiators, rangers, and refrigerators.
• Never open the pushbutton box. Contact a
qualified electrician if it is necessary to open
this box.
WORK AREA SAFETY
• Place the log splitter on a flat, stable, and
level surface that is 24–30” (60–75 cm) high.
Operate the log splitter in a location where
there is plenty of room for handling.
• To prevent unintended movement during
operation, anchor the log splitter to the work
area if it tends to slip, move, or slide.
• Keep the work area clean. A cluttered
workplace invites accidents. Do not leave
tools or pieces of wood on the log splitter
during operation.
• Before beginning any work using the log
splitter, make sure the work area has
sufficient lighting and that no obstructions
will interfere with the safety of operation.
• Do not operate the log splitter in dangerous
w09a_YW_060_3772_0_9TElectricLogSplitter_GB.indd 4 2017/3/6 22:26:43
model no. 060-3772-0 | contact us 1.866.523.5218 model no. 060-3772-0 | contact us 1.866.523.5218
5
environments. Do not use the log splitter
in wet or damp conditions, and do not
expose it to rain. In order to avoid potential
fire hazards, never use the log splitter in
an explosive atmosphere where there
are fumes from paint, solvents, and other
flammable liquids.
• Keep children and visitors away. Never
allow children or untrained adults to
operate the log splitter.
• Make the workshop childproof. Disconnect
the power cord. Store the log splitter away
from children and other individuals not
qualified to use it. Keep the workshop
locked.
SAFE OPERATION
• Always check the oil level before using the
log splitter.
• Keep all guards in place and in working
order.
• Always inspect the log splitter before
turning it on. Make it a habit to check the
log splitter for oil leaks around the ram
cylinder. Do not operate the log splitter if
oil is leaking. Refer to the Troubleshooting
section in this manual.
• Check for damaged parts. Inspect the log
splitter, including the splitting wedge and
guards, for any malfunctioning or damaged
components, cracks, and deformation.
Replace damaged, missing, or faulty parts
before using the log splitter.
• Check for alignment of moving parts,
binding of moving parts, mounting and
any other conditions that may affect the
operation of the log splitter.
• Do not place the log splitter on the ground
during operation. Doing so creates an
awkward operating position in which the
operator’s face is close to the machine
thus increasing the risk of being struck by
wood chips or debris.
• The log splitter must always be operated
by only one person. If another person is
helping to load logs to be split, do not start
the machine until that person is clear of the
operating zone. Never ask another person
for help in freeing a jammed log.
• Inspect the log before loading it on the
log splitter. Ensure there are no nails or
foreign objects in the logs to be split. The
logs should be cut as squarely as possible.
Branches must be cut off flush with the
trunk.
• Always pay attention to the movement of
the log pusher. Do not load a log until the
log pusher has stopped. Do not attempt
to remove split logs until the machine has
totally completed its work cycle and has
stopped.
• Never attempt to split more than one log
at a time.
• Do not force the log splitter. It will do the
job better and safer at the feed rate for
which it was designed.
• Do not attempt to split logs that are
larger than the log capacity indicated in
the Specifications section. Doing so is
dangerous and may damage the machine.
• Only use the log splitter for its intended
purpose. Do not force the machine to do a
job for which it was not designed.
• Never leave the log splitter unattended
while it is running. Turn the power off. Do
not leave the machine until it comes to a
complete stop.
• Consult the instruction manual before
servicing. Product repairs and service
must be performed only by qualified repair
personnel.
• Maintain the log splitter with care. Keep
the log splitter clean and the blade sharp
for better and safer performance. Follow
instructions for lubricating and changing
accessories.
• Do not dump used oil into drains, soil,
or water. Dispose of used oil only at an
authorized collection point, or follow the
regulations that are in effect in your area.
• Only use the parts and accessories
supplied with this product or specifically
designated for use with this product
by the manufacturer. Using other parts
and accessories not designated by the
manufacturer could result in personal injury
or property damage.
Important Safety Instructions
SAVE THESE INSTRUCTIONS.
w09a_YW_060_3772_0_9TElectricLogSplitter_GB.indd 5 2017/3/6 22:26:43
model no. 060-3772-0 | contact us 1.866.523.5218 model no. 060-3772-0 | contact us 1.866.523.5218
6
Symbol Name Designation/Explanation
Read the
instruction
manual.
User must read and
understand the instruction
manual and all labels
affixed to the product
before using this product.
Inspect the
log splitter.
Inspect the log splitter
for any malfunctioning or
damaged components.
Dress properly.
Do not wear loose
clothing, gloves, neckties,
or jewellery (rings, wrist
watches), because
they can get caught in
moving parts. Wear non-
conductive protective
gloves and non-skid,
steel-toed footwear. Wear
protective hair covering to
contain long hair.
Protect your
eyes and face.
Always wear
safety goggles.
Everyday eyeglasses
only have impact-resistant
lenses. They are not
safety glasses.
Keep visitors
and children
away.
Always keep other people
a safe distance away from
the work area, especially
when the log splitter is in
use. The log splitter must
always be operated by
only one person.
Symbol Name Designation/Explanation
Avoid
injury from
unexpected
accidents.
Always pay attention to
the movement of the log
pusher. Keep hands and
body out of the way of all
moving parts.
Protect your
hands.
Keep your hands away
from splits and cracks
that open in the log. Do
not remove jammed logs
using your hands. Keep
hands off the controls
while logs are being
loaded and unloaded.
Disconnect
the power.
Unplug the log splitter
when it is not in use
and before making
adjustments, changing
parts, cleaning, or
servicing.
Protect the
environment.
Dispose of used oil
only at an authorized
collection point, or follow
the regulations that are in
effect in the area where
the log splitter is used.
Warning
Indicates a potentially
hazardous situation,
which, if not avoided
could result in death or
serious injury.
Caution
Indicates a potentially
hazardous situation,
which, if not avoided,
may result in minor or
moderate injury.
Note Notes and reminders for
the operator.
Symbols
w09a_YW_060_3772_0_9TElectricLogSplitter_GB.indd 6 2017/3/6 22:26:44
model no. 060-3772-0 | contact us 1.866.523.5218 model no. 060-3772-0 | contact us 1.866.523.5218
7
Parts List
Item Description Qty
1 Nut 4
2 Snap washer 1
3 Washer 8
4 Valve rod 1
5 O-ring 1
6 Safety valve spring basis 1
7 O-ring 4
8 Safety valve spring 1
9 Safety valve core 1
10 Cylinder cover-left 1
11 Valve sleeve 1
12 O-ring 2
13 Safety valve core adjusting spring 1
14 Adjusting spring basis 1
15 Stud 4
16 Cylinder 1
17 Piston 1
18 Piston ring 1
19 O-ring 1
20 Restoring spring 1
21 Circlip 1
22 Snap washer 1
23 O-ring 1
24 O-ring 2
25 O-ring 1
26 Bleed screw 1
27 Wear-resisting belt 1
28 O-ring 1
29 Piston seal 1
30 Piston rod weldment 1
31 Washer 2
32 Nut 2
33 Copper washer 4
34 Valve sleeve 1
35 O-ring 4
w09a_YW_060_3772_0_9TElectricLogSplitter_GB.indd 7 2017/3/6 22:26:44
model no. 060-3772-0 | contact us 1.866.523.5218 model no. 060-3772-0 | contact us 1.866.523.5218
8
Item Description Qty
36 Screw 2
37 Steel ball 1
38 Valve 1
39 Valve rod restoring spring 1
40 O-ring 1
41 Valve base 1
42 Intake hose 1
43 Connection hose 1
44 Cylinder cover guard 1
45 Lever nut 1
46 Lever head 1
47 Lever 1
48 Carriage nut 3
49 Separating plate 1
50 Bolt 12
51 Washer 21
52 Body cover-right 1
53 Tube frame 1
54 Cylinder cover - right 1
55 Dipstick washer 1
56 Dipstick 1
57 Guard cover-right 1
58 Guard cover-left 1
59 Nut 2
60 Washer 2
61 Wheel 2
62 Wheel shaft frame 1
63 Nut 5
64 Nut 4
65 Hex bolt 1
66 Log pusher 1
67 Washer 4
68 Cross-headed screw 4
69 Body cover-left 1
70 Hex bolt 4
Parts List
w09a_YW_060_3772_0_9TElectricLogSplitter_GB.indd 8 2017/3/6 22:26:44
model no. 060-3772-0 | contact us 1.866.523.5218 model no. 060-3772-0 | contact us 1.866.523.5218
9
Item Description Qty
71 Plastic insert-upper 1
72 Drawing weldment 1
73 Plastic insert-lower 1
74 Thin nut 2
75 Spring washer 2
76 Support leg 1
77 Bolt 2
78 Handle 1
79 Sleeve 1
80 O-ring 2
81 O-ring 2
82 Gear shaft snap washer 2
83 Steel ball 1
84 Bolt 6
85 Spring washer 9
86 Bolt 3
87 Pump cover 1
88 Sleeve bearing 4
89 Gear shaft 1
90 Pin 1
91 Gear 2
92 Pin 2
93 Gear housing plate 1
94 Motor support shoe-right 1
95 Motor cover 1
96 Motor support shoe-left 1
97 Seal 1
98 Motor assembly 1
99 Nut 1
100 Screw 1
101 Bolt with rubber feet 2
102 Nut 4
103 Instruction manual 1
Parts List
w09a_YW_060_3772_0_9TElectricLogSplitter_GB.indd 9 2017/3/6 22:26:44
model no. 060-3772-0 | contact us 1.866.523.5218 model no. 060-3772-0 | contact us 1.866.523.5218
10
Exploded View
1 2 15 25 26 27 28 30
33
37
36 38 42 44 49 50 51 52 53
64
6362
6160 65 66 67 68 69 70 71 74 75 76 77 78 79
101102
E
AB C D
83
100
9998979584 85 86 969487 88 89 91 92 93
54 55 56 58
31 32
103
82
80 81
72 73
57
21 22 23
24
2917 18 19 20
59
45 46 47 484339 40 41
3 4 5 6 7 8 9 10
16
11 12 13 14
34 35
90
w09a_YW_060_3772_0_9TElectricLogSplitter_GB.indd 10 2017/3/6 22:26:44
Tabla de contenidos
Otros manuales de Partidor de troncos de Yard Works
Manuales populares de Partidor de troncos de otras marcas
Scheppach
Scheppach OX 3-1000 Instrucciones de montaje
Swisher
Swisher 21200 Manual de usuario
Elem Garden Technic
Elem Garden Technic FBHT65-22TCH Manual de usuario
Champion Power Equipment
Champion Power Equipment 90720 Manual
Boss Industrial
Boss Industrial ES5T20 Manual de usuario
Villager
Villager LSP 12 T Manual de usuario
