Yamaha WS-B1A Manual de usuario

Owner’s Manual

Wireless Speaker

2En

Thank you for purchasing this Yamaha product.

This wireless speaker is a Bluetooth® speaker that you can take anywhere you like and enjoy music

from a smart device whenever you want to.

Be sure to read the included Safety Brochure to ensure proper and safe use. Keep it readily available for

future reference.

Included accessories 3

Control buttons 4

Charging the unit 5

Turning on the unit 6

Connecting a Bluetooth® device 7

Troubleshooting 8

Restarting or initializing the unit 12

List of lamp displays 13

Specifications 15

CONTENTS

3En

Included accessories

USB cable

(for charging the unit; 1 m,

Type A to Type C)

Quick Start Guide Safety Brochure

4En

Control buttons

Power button

Power lamp

R Play/Pause button

During playback, press the button twice

quickly to skip to the next song, or three

times to skip backward to the beginning

of the current song or previous song.

Clear Voice lamp Q Clear Voice button

When the Clear Voice function is

enabled, the Clear Voice lamp glows,

and human voices such as dialog in the

audio can be heard more clearly.

Volume buttons

Adjust the volume.

5En

Use a commercially available USB power adapter that can output DC 5 V (2 A or more) when charging

the unit.

A charging cradle (Yamaha CC-T1A; sold separately) can also be used to charge the unit.

1Connect the Type-C connector of the USB cable to the USB port on this unit.

2Connect the Type-A connector of the USB cable to the USB power adapter.

3Plug in the USB power adapter to an AC wall outlet.

The power lamp glows orange and charging will start. When charging is completed, the power

lamp turns off.

NOTE

• When charging with a DC 5 V (2 A or more) USB power adapter, the charging time is approximately

three hours. Charging time varies depending on the usage environment and conditions.

• If the unit is charged while it is playing at a high volume, the remaining battery may decrease. Turn

down the volume or turn off the unit and wait until charging is complete, and then use it.

Charging the unit

Do not charge the unit when it is wet. Charging with liquid or foreign matter

on the terminals may cause fire, explosion, liquid leakage, electric shock, or

malfunction.

CAUTION

USB power

adapter

(commercially

available)

USB cable (included)

6En

Hold down the power button to turn on the unit.

The power lamp flashes to inform you of the remaining battery level.

− Flashing white: Remaining battery level is more than half.

− Flashing orange: Remaining battery level is less than half.

After showing the remaining battery level, the unit turns on. To turn off the unit, press and hold the

power button again

NOTE

• If the Play/Pause button (R) is pressed for at least five seconds while the unit is on, the power lamp

and a melody inform you of the remaining battery level.

• This unit will automatically switch to standby in any of the following situations (Auto Standby):

− No playback for 20 minutes or more

− No operation for eight hours or more, regardless of playback

A melody will inform you of the status of this unit, such as when the power is turned on or when a

Bluetooth device is connected.

To disable the Sound Guide, hold down the Clear Voice button (p. 4) for at least three seconds. The

Sound Guide switches between enabled and disabled each time the button is held down.

Turning on the unit

Remaining battery level Power lamp Melody

More than half Flashes white Long sound

Less than half Flashes orange Medium length sound

Less than 20% Short sound

Sound guide (default setting: enabled)

1・・・2・・・

7En

A Bluetooth device can be connected when the power lamp is flashing blue.

NOTE

• If other Bluetooth devices have been connected before, the unit will connect to the last connected

device when the unit is turned on. To connect a new Bluetooth device, disconnect the currently

connected Bluetooth device and then connect the new device.

• To terminate the Bluetooth connection from this unit, press the volume (−) button and Play/Pause

(R) (p. 4) button simultaneously for at least five seconds.

1On the Bluetooth device, enable the Bluetooth function.

2On the Bluetooth device, select this unit (Yamaha WS-B1A) from the list of

available devices to connect to.

If a passkey is required, enter the number “0000”.

When the connection is established, the power lamp glows blue.

3Play audio content on the Bluetooth device.

Connecting a Bluetooth® device

WS-B1A

＊＊＊＊＊

♩

㽈♪

♬

8En

Try following the instructions described in “Troubleshooting” first when the unit does not function

properly. If an error occurs, the lamp flashes to notify you. See “List of lamp displays”(p. 13) for

details.

If the unit does not function properly after following the instructions to solve the problem, restart or

initialize it. (p. 12)

If the unit still does not function properly even after following these instructions, turn off the unit and

contact the nearest authorized Yamaha dealer or service center.

The unit cannot be charged / It takes a long time to charge

A USB power adapter that is not compatible with the unit is being used.

Use a USB power adapter that can output DC 5 V (2 A or more). (p. 5)

The USB power adapter and this unit are not properly connected.

Check that all connections are made properly. (p. 5)

Ambient temperature is too high or too low.

Charge the unit within the temperature range of 5°C to 35°C. (p. 5)

Charging takes a long time.

It is possible that charging is stopped. Disconnect and reconnect the USB cable and charge the

unit again. (p. 5)

The protection circuitry of this unit has been activated.

Check the lamp display. (p. 13)

The unit is connected to a USB charging compatible port on a computer.

This function is not guaranteed. Use a USB power adapter that can output DC 5 V (2 A or more).

Troubleshooting

9En

The unit cannot be turned on

The power button is not being pressed and held.

To turn on the unit, press and hold the power button for at least three seconds. (p. 6)

The remaining battery level is low.

Charge the unit. (p. 5)

Ambient temperature is too high or too low.

Use the unit within the operating temperature range. (p. 15)

The unit turns off suddenly

The remaining battery level is low.

Charge the unit. (p. 5)

NOTE

If the unit is playing at a high volume, the remaining battery may decrease and the unit may turn

off even if it is charging. In this case, turn off the unit, and then fully charge it before use.

The Auto Standby function turned off the unit.

Turn on the unit again. (p. 6)

Ambient temperature is too high or too low.

Use the unit within the operating temperature range. (p. 15)

The rechargeable battery in the unit has deteriorated.

Contact the nearest authorized or Yamaha dealer or service center.

10 En

The unit cannot be connected to a Bluetooth device

The name of this unit is not displayed in the list of available devices to connect to on the

Bluetooth device.

Try disabling and re-enabling the Bluetooth function of the Bluetooth device. The name of this

unit may then be displayed.

This unit cannot be connected to the Bluetooth device even though the name of the unit

is displayed in the list of available devices to connect to on the Bluetooth device.

Try deleting the name of this unit from the list and connecting the unit to the Bluetooth device

again. The unit may then be connected to the Bluetooth device.

The Bluetooth device is not turned on.

Turn on the Bluetooth device and ensure that its Bluetooth function is enabled.

The unit is connected to another Bluetooth device.

Terminate the current Bluetooth connection, and then connect to the new device. (p. 7)

The unit and the Bluetooth device are too far away from each other.

Move the Bluetooth device and/or the unit so that they are closer to each other.

The audio output destination on the Bluetooth device is not set to this unit.

Select the unit as the audio output destination on the Bluetooth device.

Electromagnetic waves being emitted from devices using 2.4 GHz (such as microwave

ovens or wireless devices) are obstructing the wireless communication.

Do not use the unit near such devices.

This unit has been initialized.

The connection information will be deleted when the unit is initialized. Delete the name of this

unit from the list of available devices to connect to on the Bluetooth device and then connect to

the Bluetooth device again. (p. 7)

The passkey for the Bluetooth device is not “0000”.

Bluetooth devices with a passkey other than “0000” cannot be used.

The Bluetooth device you are using does not support the A2DP profile.

Use a Bluetooth device that supports the A2DP profile.

Otros manuales para WS-B1A

Tabla de contenidos

Otros manuales de Oradores de Yamaha

Yamaha

Yamaha STAGEPAS 150M Manual de usuario

Yamaha

Yamaha VXC4 Manual de usuario

Yamaha

Yamaha NS-IW660 - Left / Right CH Speakers Manual de usuario

Yamaha

Yamaha YSTMS50B Manual de usuario

Yamaha

Yamaha DSR112 Manual de operación y mantenimiento

Yamaha

Yamaha Stagepas 300 Manual de usuario

Yamaha

Yamaha YST-MS50 Manual de usuario

Yamaha

Yamaha WS-B1A Manual de usuario

Yamaha

Yamaha NS-C385 Manual de usuario

Yamaha

Yamaha YST-MS28 Manual de usuario

Yamaha

Yamaha NX-SW10 Manual de usuario

Yamaha

Yamaha NX-U10 - Speaker Sys Manual de usuario

Yamaha

Yamaha NS-C300 Manual de usuario

Yamaha

Yamaha NS-F210 Manual de usuario

Yamaha

Yamaha Stagepas 600i Manual de usuario

Yamaha

Yamaha PS 110 Manual de usuario

Yamaha

Yamaha NS-B901 Manual de usuario

Yamaha

Yamaha MS101 III Manual de usuario

Yamaha

Yamaha HAF2-2115 Manual de usuario

Yamaha

Yamaha MS40DR Manual de usuario

Yamaha

Yamaha MSR400 Manual de usuario

Yamaha

Yamaha VS4W Manual de usuario

Yamaha

Yamaha PSG-01S Manual de usuario

Yamaha

Yamaha MSR400 Manual de usuario

Manuales populares de Oradores de otras marcas

argon audio

argon audio IE20 Manual de usuario

Denon

Denon SC-N7 Manual de usuario

Gemline

Gemline Ace 3952 Manual de usuario

Focal

Focal ON WALL 300 Manual de instrucciones

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manual de usuario

SoundLogic

SoundLogic BCCS-6/6395 Manual de usuario

Peavey

Peavey DTH 218 Manual de usuario

Avantree

Avantree Pluto Air Manual de usuario

Morel

Morel Integra Series INTEGRA OVATION 4 Manual de usuario

Oppo

Oppo SONICA Manual de usuario

Bose

Bose SoundLink Wireless Music System Manual de usuario

Rocksteady

Rocksteady Stadium Manual de usuario

Bowers & Wilkins

Bowers & Wilkins 4 Manual de usuario

Sonance

Sonance SONOS OUTDOOR Series Manual de usuario

Electro-Voice

Electro-Voice EVID FM4.2 Manual de usuario

Pioneer

Pioneer XW-HTD630 Manual de usuario

Onn

Onn BWA16AA002 Manual de usuario

HP GL313AA - USB Speakers PC Multimedia Manual de usuario