Yamaha ESB-1080 Manual de usuario

ESB-1080

Installation Guide

Table of Contents

1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê1

1.1. About the Modes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê1

1.2. Setup Text File Creation Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê1

2. Preparation of Setup Text File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê2

2.1. Creating a Setup Text File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê2

2.2. Copying to USB memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê2

3. Install Mode Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê3

3.1. Changing Install Mode settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê3

4. Mode Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê4

4.1. Function limitations of remote control in Install Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê4

4.2. Conference mode settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê5

4.3. Hotel mode settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ê6

1. Introduction

1.1. About the Modes

The ESB-1080 unit has different functions depending on the intended use.

It features two Install Modes: Conference Mode or Hotel Mode, and is started in Conference Mode by default.

Refer to this Installation Guide for instructions on the various settings of Conference Mode, as well as changing

to Hotel Mode.

1.1.1. Conference Mode

Conference Mode is optimized for installation in business conferences or meeting spaces.

It is used for sound amplification within teleconferencing or video presentations.

Sound processing is optimized for teleconference software applications.

1.1.2. Hotel Mode

Hotel Mode is optimized for installation in guest rooms at hotels.

Other example uses would be within public lobbies or waiting areas.

Sound processing is optimized for listening to TV and movies.

1.2. Setup Text File Creation Tool

The Setup Text File for switching Install Modes and changing settings can be outputted from Setup Text File

Creation Tool (ESB_ConferenceHotelMode_Setup.xlsm).

Loading the Setup Text File to this unit allows each Install mode’s functions to be customized.

Unzip the downloaded file and use the dedicated tool (ESB_ConferenceHotelMode_Setup.xlsm), included with

this Installation Guide in the same folder.

1. Introduction

ESB-1080 Installation Guide | 1

2. Preparation of Setup Text File

2.1. Creating a Setup Text File

To make the desired settings, use the dedicated tool (ESB_ConferenceHotelMode_Setup.xlsm) to create a Setup

Text File.

Microsoft Office Excel ® (2007 or later) is required to use this tool.

Enter the desired settings in the cells in the red frame and click the "Create a Setup Text File" button.

A Setup Text File is created in the same layer folder as this tool.

The file name can be changed simply by changing the 3-digit number part as desired (e.g., ROOM000.TXT,

ROOM001.TXT, ROOM999.TXT).

2.2. Copying to USB memory

Copy only one file to the first layer of USB memory for the created Setup Text File.

Do not copy the created Setup Text File in a folder, or put multiple Setup Text Files in the same USB memory.

2. Preparation of Setup Text File

2| ESB-1080 Installation Guide

3. Install Mode Operation

3.1. Changing Install Mode settings

In order to reflect the settings in the unit, it is necessary to re-enter the Install Mode with a USB memory device

containing the Setup Text File connected to the [UPDATE ONLY] jack of the unit, after releasing the Install Mode.

If you have already released Install Mode, go to step 2.

1. Cancel the Install Mode using the remote control.

a. Set the unit to standby mode. Make sure that the main unit LED is not lit.

b. Press the remote control’s [DIMMER] button, VOLUME [-] button, VOLUME [-] button and [Mute]

button in that order within three seconds.

Make sure that the main unit indicators light as follows.

2. Connect the USB memory containing the Setup Text File to the [UPDATE ONLY] jack of the unit.

3. Enable the Install Mode by using the remote control.

a. Make sure that the unit is in standby status.

b. Press the [BASS EXTENSION] button, VOLUME [+] button, VOLUME [+] button and [Mute] button on

the remote control in this order within three seconds. Make sure that the indicator lights as shown

below and the power to the unit is turned on.

ÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊc. Check that the settings are properly reflected.

ÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊÊd. Remove the USB memory device from the [UPDATE ONLY] jack of the unit.

Keep in mind that the Install Mode status is maintained until Install Mode is canceled. Install Mode is maintained

even if the electrical outlet is connected or disconnected.

Note

About canceled status of Install Mode

When remote conferencing is not used or the restriction for user operations is not necessary, the unit can

be used even when Install Mode is released (e.g., as a sound bar in a surround system).

However, optimization of sound processing and functions such as panel lock do not work.

3. Install Mode Operation

ESB-1080 Installation Guide | 3

4. Mode Specifications

4.1. Function limitations of remote control in Install Mode

When using the ESB-1080 unit in Conference mode or Hotel mode, some remote control functions are disabled.

The table below shows the enabled and disabled functions within these modes:

Button Conference Mode Hotel Mode

Power ENABLED ENABLED

Input HDMI ENABLED ENABLED

TV DISABLED ENABLED

ANALOG ENABLED ENABLED

BLUETOOTH ENABLED/DISABLED ENABLED/DISABLED

SURROUND ENABLED/DISABLED ENABLED

3D SURROUND ENABLED/DISABLED ENABLED

INFO DISABLED DISABLED

BLUETOOTH STANDBY ENABLED ENABLED

SUBWOOFER (+/-) DISABLED ENABLED

MUTE ENABLED ENABLED

STEREO ENABLED ENABLED

CREAR VOICE DISABLED ENABLED

DIMMER ENABLED ENABLED

BASS EXTENSION DISABLED ENABLED

VOLUME (+/-) ENABLED ENABLED

4. Mode Specifications

4| ESB-1080 Installation Guide

Note

•The ENABLED/DISABLED setting of the BLUETOOTH button conforms to the setting of Bluetooth

Function.

•The ENABLED/DISABLED settings of the SURROUND and 3D SURROUND buttons conform to the

setting of Surround Mode.

4.2. Conference mode settings

You can change any of the Conference mode settings (below) within the Setup Text File.

Setting items Description Default setting

Turn on Volume Sets the power-on volume in the range of 0 to 50. 20

Max Volume Sets the maximum volume in the range of 1 to 50. 40

Key Pattern Sets the front panel key lock.

The following two types of key patterns can be

selected.

1. Lock all keys.

2. Enable for Volume +/-, Mute key only.

Surround Mode Enables/disables the surround function. Disable

Bluetooth Function Enables/disables the Bluetooth function. Enable

Bluetooth Name Rename the Bluetooth name. ESB-1080

Auto Power Standby Enables/disables the Auto Power Standby function. Disable

Power Status Back Up Enables/disables the function for maintaining the

power status when the AC cable is disconnected and

reconnected.

Disable

Turn on Input Sets the power-on input. The input can be selected

from HDMI, ANALOG, and BLUETOOTH.

HDMI

Note

•When the Turn on Volume is set to 0, the volume before power off is maintained.

•In Conference mode, we recommend that you disable the surround function (default setting) to

maintain the clarity of the conference audio.

•Set the Bluetooth Name using ASCII code (letters, numbers, symbols) within 13 characters.

4. Mode Specifications

ESB-1080 Installation Guide | 5

4.3. Hotel mode settings

You can change any of the Hotel mode settings (below) within the Setup Text File.

Setting items Description Default setting

Turn on Volume Sets the power-on Volume in the range of 0 to 50. 20

Max Volume Sets the maximum Volume in the range of 1 to 50. 50

Key Pattern Sets the front panel key lock.

The following two types of key patterns can be

selected.

1. Enable for Volume +/-.

2. Lock all keys.

Bluetooth Function Enables/disables the Bluetooth function. Enable

Bluetooth Name Rename the Bluetooth name. ESB-1080

Auto Power Standby Enables/disables the Auto Power Standby function. Disable

Power Status Back Up Enables/disables the function for maintaining the

power status when the AC cable is disconnected and

reconnected.

Disable

Turn on Input Sets the power-on input. The input can be selected

from HDMI, TV, ANALOG, BLUETOOTH.

HDMI

Note

•When Turn on Volume is set to 0, the volume before power off is maintained.

•Set the Bluetooth Name using ASCII code (letters, numbers, symbols) within 13 characters.

4. Mode Specifications

6| ESB-1080 Installation Guide

Manual Development Group

Published 08/2019

YJ-B0

Otros manuales para ESB-1080

Tabla de contenidos

Otros manuales de Sistema de altavoces de Yamaha

Yamaha

Yamaha Aventage RX-A3040 Manual de instalación

Yamaha

Yamaha NS-U30 Manual de usuario

Yamaha

Yamaha NS-M515 Manual de usuario

Yamaha

Yamaha SR-C20A Manual de usuario

Yamaha

Yamaha IF2108 Instrucciones de montaje

Yamaha

Yamaha C112V Manual de usuario

Yamaha

Yamaha TRUE X BAR 40A Manual de usuario

Yamaha

Yamaha NS225F - NS 255F Left Manual de usuario

Yamaha

Yamaha Soavo-900C Manual de usuario

Yamaha

Yamaha YRS-700 Manual de usuario

Yamaha

Yamaha YAS-201 Manual de usuario

Yamaha

Yamaha IF2108 Manual de usuario

Yamaha

Yamaha R112 Manual de usuario

Yamaha

Yamaha NS-B20 Manual de usuario

Yamaha

Yamaha HTY-7040 Manual de usuario

Yamaha

Yamaha NS-A2835 Manual de usuario

Yamaha

Yamaha NS-AP3700 Manual de usuario

Yamaha

Yamaha NS-WSW121 Manual de usuario

Yamaha

Yamaha Installation Series Manual de usuario

Yamaha

Yamaha NS-90 Manual de usuario

Yamaha

Yamaha NS-C5HX Manual de usuario

Yamaha

Yamaha AX-10 Manual de usuario

Yamaha

Yamaha Digital Sound Projector YSP-900 Manual de usuario

Yamaha

Yamaha NS-120 Manual de usuario

Manuales populares de Sistema de altavoces de otras marcas

JVC

JVC CA-MXK5R Manual de usuario

LG NB4532B Manual de usuario

JVC

JVC CA-FSH100 Manual de usuario

5Core

5Core Pro Series Manual de usuario

EAW

EAW MQV1394e Manual de usuario

Lynx

Lynx GXR-LA10A Manual de usuario

iLive

iLive ITB066B Manual de usuario

RDX

RDX QuickStation 4 Manual de usuario

Electro-Voice

Electro-Voice S-122 Manual de usuario

Sven

Sven SPS-619 GOLD Manual de usuario

Pioneer

Pioneer CS-7070 Manual de usuario

EAW

EAW UB82e Manual de usuario

Sondpex

Sondpex Active Speaker System and Digital Music... Manual de usuario

JVC

JVC NX-PN7 Manual de usuario

Marshall Amplification

Marshall Amplification AR-DM61-BT Manual de usuario

SE Audiotechnik

SE Audiotechnik I-LINE Manual de usuario

Gemini

Gemini WRX-843 Series Manual de usuario

TCL

TCL 6100 Series Manual de usuario