Yamaha DTX-PRO Instrucciones de montaje
DTX-PRO Firmware Update Guide 1
DTX-PRO
Firmware Update Guide
Thank you for choosing a Yamaha product.
This document explains how to update the firmware of the DTX-PRO and the revision history.
NOTICE
•
Please save your important data onto a USB flash drive before updating the firmware of the DTX-PRO.
•
This updater is to be used at the user’s own risk.
•
DO NOT power off or disconnect the cable from the DTX-PRO during the updating process. Doing so
may damage the DTX-PRO.
•
DO NOT remove the USB flash drive from the DTX-PRO during the updating process. The DTX-PRO
and the USB flash drive may become inoperable.
•
If the update failed, and the DTX-PRO no longer operates, run the update program again. If doing so
does not solve the problem, please contact your Yamaha dealer.
•
This firmware and documentation are the exclusive copyrights of Yamaha Corporation.
•
Reproducing or modifying all or parts of this firmware or its documentation without permission is
strictly prohibited.
•
The company names and product names in this document are the trademarks or registered trademarks
of their respective companies.
EN
DTX-PRO Firmware Update Guide 2
Included files
The .zip file contains the following files:
• DTX-PRO_en_update_guide_v***.pdf This document (PDF file)
• DTX-PRO_SETUP.PRG The update program
Required items
• USB flash drive formatted on the DTX-PRO
Please check the URL below for a list of supported USB flash drives.
https://download.yamaha.com
After selecting your country and clicking on “Documents and Data” from the “Support” page, enter the
model name into the search box.
Checking the current version
Check the version from MENU/Version.
Updating procedure
NOTICE
Please save your important data onto the USB flash drive before updating the firmware of the DTX-PRO.
1. After downloading, decompress the archived file, and then find the "***.PRG"
file. Copy the "***.PRG" file to the root of the USB flash drive.
DTX-PRO Firmware Update Guide 3
2. Make sure to turn the power off, and then connect the USB flash drive to the
[USB TO DEVICE] terminal on the rear panel.
3. Hold down the [START/STOP] button and press the Standby/On switch to turn
the power on.
After a few seconds, the following message will appear.
4. Press the [MENU] button.
The following message will appear.
5. Press the [MENU] button again to start the update process.
The process may take a few minutes.
When the update process is complete, the following message will appear.
6. Turn the power off.
This completes the update process.
Installer
[MENU]：Install
[EXIT]：Delete
Press the button
Yamaha Corp.
Installer
[MENU]：Execute
[EXIT]：Cancel
Program ver.*.**
Yamaha Corp.
Installer
Completed.
Turn power off.
Program ver.*.**
Yamaha Corp.
DTX-PRO Firmware Update Guide 4
Manual Development Group
©2020 Yamaha Corporation
Published 11/2020
YJ-A0
Troubleshooting
The power was turned off or the USB flash drive was removed before the installation
process could be completed.
You need to reinstall the program. Go back to the beginning of the procedure
and try installing again.
An error message appears, and you cannot install the firmware.
Please check that:
・The USB flash drive is inserted correctly.
・There is no dust or dirt on the USB terminal.
・The installation program file is saved at the root of the USB flash drive.
・The data in the USB flash drive or the USB flash drive itself is not corrupted.
・You have the correct file for your drum module.
・The same problem does not occur with a different USB flash drive.
Main enhancements
v1.00 ➜v1.01
・Added the DTX502 series drum kits to the Trigger Setup Wizard.
・Fine-adjusted the MENU/Trigger/Crosstalk settings. Since the settings are
slightly different from those of version 1.00, readjust the crosstalk settings
if necessary.
・Added -6dB, -12dB, and 18dB to the MENU/Utility/Output Gain settings.
・Added PA-HP to the MENU/Utility/Input Output/AUX In/Input Mode settings.
・Added AUX In Gain to the MENU/Utility/Input Output settings.
・Changed setting ranges for some parameters.
・Updated the displays on some screens.
・Fixed minor problems.
Otros manuales para DTX-PRO
3
Tabla de contenidos
Otros manuales de Tambor de Yamaha
Yamaha
Yamaha DTX-PRO Manual de usuario
Yamaha
Yamaha EAD10 Manual de usuario
Yamaha
Yamaha TMX Manual de usuario
Yamaha
Yamaha DD-3 Manual de usuario
Yamaha
Yamaha DD-75 Manual de usuario
Yamaha
Yamaha CB832C Manual de usuario
Yamaha
Yamaha DD-6 Manual de usuario
Yamaha
Yamaha DD-20S Manual de usuario
Yamaha
Yamaha Drum Score DTX 402 Series Manual de usuario
Yamaha
Yamaha DTX900M Instrucciones de montaje
Yamaha
Yamaha DTXPLORER Manual de servicio
Yamaha
Yamaha DTX550K Manual de usuario
Yamaha
Yamaha Electronic Drum Set HXR4LD Manual de usuario
Yamaha
Yamaha 2 Manual técnico
Yamaha
Yamaha RX-15 Manual
Yamaha
Yamaha QD-8313 Manual de usuario
Yamaha
Yamaha Rydeen Manual de usuario
Yamaha
Yamaha DD-12 Manual de usuario
Yamaha
Yamaha RX-120 Manual de usuario
Yamaha
Yamaha DTX XP80 Manual de usuario
