Yamaha WaveRunner VX 700 Manual de usuario

SERVICE MANUAL

WaveRunner

F2V-28197-ZN-11

VX 700

VX 700 (F2V)

Preface

This manual has been prepared by Yamaha primarily for use by Yamaha dealers and their trained

mechanics when performing maintenance procedures and repairs to Yamaha equipment. It has

been written to suit the needs of persons who have a basic understanding of the mechanical and

electrical concepts and procedures inherent in the work, for without such knowledge attempted

repairs or service to the equipment could render it unsafe or unfit for use.

Because Yamaha has a policy of continuously improving its products, models may differ in detail

from the descriptions and illustrations given in this publication. Use only the latest edition of this

manual. Authorized Yamaha dealers are notified periodically of modifications and significant

changes in specifications and procedures, and these are incorporated in successive editions of this

manual. Also, up-to-date parts information is available on YPEC-web. Additional information and

up-to-date information on Yamaha products and services are available on Yamaha Service Portal.

Important information

Particularly important information is distinguished in this manual by the following notations:

The Safety Alert Symbol means ATTENTION! BECOME ALERT! YOUR SAFETY IS

INVOLVED!

A WARNING indicates a hazardous situation which, if not avoided, could result in death or

serious injury.

A NOTICE indicates special precautions that must be taken to avoid damages to the water-

craft or other property.

TIP:

A TIP provides key information to make procedures easier or clearer.

WaveRunner

VX 700

SERVICE MANUAL

1st Edition, September 2010

Any reprinting or unauthorized use

without the written permission of

Yamaha Motor Co., Ltd.

is expressly prohibited.

Contents

General information GEN

INFO

Specification SPEC

Maintenance MNT

Fuel system FUEL

Power unit POWR

Jet pump unit JET

PUMP

Electrical system ELEC

Hull and hood HULL

HOOD

Troubleshooting TRBL

SHTG

Appendix

–+

GEN

INFO

General information

Safety while working ..................................................... 1-1

Rotating part............................................................................... 1-1

Hot part....................................................................................... 1-1

Electric shock ............................................................................. 1-1

Impeller....................................................................................... 1-1

Handling of gasoline................................................................... 1-1

Ventilation................................................................................... 1-2

Self-protection ............................................................................ 1-2

Working with crane..................................................................... 1-2

Handling of heat gun .................................................................. 1-3

Part, lubricant, and sealant......................................................... 1-3

Handling of sealant..................................................................... 1-3

Special service tool .................................................................... 1-3

Tightening torque ....................................................................... 1-3

Non-reusable part....................................................................... 1-3

Disassembly and assembly........................................................ 1-4

How to use this manual ..................................................... 1-5

Manual format ............................................................................ 1-5

Abbreviation ............................................................................... 1-6

Adhesive, lubricant, sealant,

and thread locking agent................................................... 1-7

Symbol ....................................................................................... 1-7

Special service tool............................................................ 1-8

Model feature.................................................................... 1-10

Identification number ................................................................ 1-10

1-1

GEN

INFO General information

Safety while working

To prevent an accident or injury and to pro-

vide quality service, observe the following

safety procedures.

Rotating part

•Hands, feet, hair, jewelry, clothing, per-

sonal flotation device straps, and so on,

can become entangled with internal rotating

parts of the engine or jet pump unit, result-

ing in serious injury or death.

•Keep hands, feet, hair, jewelry, clothing,

personal flotation device straps, and so on,

away from any exposed moving parts when

operating the engine with the seat

removed.

•Keep away from intake grate while engine

is on. Items such as hair, clothing, or per-

sonal flotation device straps can become

entangled in moving parts resulting in

severe injury.

Hot part

During and after operation, engine parts are

hot enough to cause burns. Do not touch any

parts in the engine compartment until the

engine has cooled.

Electric shock

Do not touch any electrical parts while start-

ing or operating the engine. Otherwise, shock

or electrocution could result.

Impeller

Do not hold the impeller with your hands

when loosening or tightening the impeller.

Handling of gasoline

•Gasoline is highly flammable. Keep gaso-

line and all flammable products away from

heat, sparks, and open flames.

•Gasoline is poisonous and can cause injury

or death. Handle gasoline with care. Never

siphon gasoline by mouth. If you swallow

some gasoline, inhale a lot of gasoline

vapor, or get some gasoline in your eyes,

see your doctor immediately. If gasoline

spills on your skin, wash with soap and

water. If gasoline spills on your clothing,

change your clothes.

1-2

Ventilation

•Gasoline vapor and exhaust gas are

heavier than air and extremely poisonous.

If gasoline vapor or exhaust gas is inhaled

in large quantities, it may cause loss of con-

sciousness and death within a short time.

•When test running an engine indoors (for

example, in a water tank) make sure to do

so where adequate ventilation can be main-

tained.

Self-protection

•Protect your eyes by wearing safety

glasses or safety goggles during all opera-

tions involving drilling and grinding, or when

using an air compressor.

•Protect your hands and feet by wearing

protective gloves and safety shoes when

necessary.

Working with crane

•When moving the watercraft, or when lifting

the engine during removal or installation,

make sure to use a crane with a lifting

capacity that is equal to or more than the

weight of the watercraft or engine respec-

tively.

•When lifting the watercraft, use the water-

craft lift harness and make sure that the

watercraft is in a stable position when mov-

ing it.

•Use the wire ropes of adequate strength,

and lift up the engine unit using the three

point suspension. If the engine unit does

not have three or more points to be sus-

pended, support it using additional ropes or

the like so that the engine unit can be lifted

and carried in a stable manner.

Safety while working

1-3

GEN

INFO General information

Handling of heat gun

•Improper handling of a heat gun may result

in burns. For information on the proper han-

dling of the heat gun, see the operation

manual issued by the manufacturer.

•When using a heat gun, keep it away from

the gasoline and oil, to prevent a fire.

•Components become hot enough to cause

burns. Do not touch any hot components

directly.

Part, lubricant, and sealant

Use only genuine Yamaha parts, lubricants,

and sealants, or those recommended by

Yamaha, when servicing or repairing the

watercraft.

Handling of sealant

•Wear protective gloves to protect your skin,

when using the sealants.

•See the material safety data sheet issued

by the manufacturer. Some of the sealants

may be harmful to human health.

Special service tool

Use the recommended special service tools

to work safely, and to protect parts from dam-

age.

Tightening torque

Follow the tightening torque specifications

provided throughout the manual. When tight-

ening nuts, bolts, and screws, tighten the

large sizes first, and tighten fasteners starting

in the center and moving outward.

Non-reusable part

Always use new gaskets, seals, O-rings, cot-

ter pins, and so on, when installing or assem-

bling parts.

1-4

Disassembly and assembly

•Use compressed air to remove dust and dirt

during disassembly.

•Apply engine oil to the contact surfaces of

moving parts before assembly.

•Install bearings so that the bearing identifi-

cation mark is facing in the direction indi-

cated in the installation procedure. In

addition, make sure to lubricate the bear-

ings liberally.

•Apply a thin coat of water resistant grease

to the lip and periphery of an oil seal before

installation.

•Check that moving parts operate normally

after assembly.

Safety while working

1-5

GEN

INFO General information

How to use this manual

Manual format

The format of this manual has been designed to make service procedures clear and easy to under-

stand. Use the information below as a guide for effective and quality service.

•Parts are shown and detailed in an exploded diagram and are listed in the component list (see 1

in the following figure for an example page).

•The component list consists of part names and quantities, as well as bolt and screw dimensions

(see 2in the following figure). To assemble or install the components, reverse the steps indicated

in the component list.

•Symbols are used to indicate important aspects of a procedure, such as the grade of lubricant and

the lubrication point (see 3in the following figure).

•Tightening torque specifications are provided in the exploded diagrams (see 4in the following fig-

ure), and in the related detailed instructions. Some torque specifications are listed in stages as

torque figures or angles in degrees.

•Separate procedures and illustrations are used to explain the details of removal, checking, and

installation where necessary (see 5in the following figure for an example page).

TIP:

For troubleshooting procedures, see Chapter 9, “Troubleshooting.”

6-6

Impeller duct and drive shaft

*: EPNOC grease AP #0

No. Part name Q’ty Remarks

1 Bolt 3 M6 20 mm

2Cap 1

3O-ring 1 Not reusable

4Cap 1

5 Impeller 1

6 Drive shaft 1

7 Oil seal 1 Not reusable

8 Oil seal 1 Not reusable

9 Rear bearing 1 Not reusable

10 Spacer 1

11 Front bearing 1 Not reusable

12 Impeller duct 1

Jet thrust nozzle, impeller duct, and impeller housing / Impeller duct and drive shaft

6-7

JET

PUMP Jet pump unit

Drive shaft removal

1. Remove the impeller.

TIP:

Hold the impeller duct assy. in a vise

between two aluminum plates a.

2. Remove the drive shaft 1.

TIP:

Remove the drive shaft using a press.

3. Remove the rear bearing.

4. Remove the oil seals.

TIP:

Remove the oil seals using a flat head screw-

driver.

5. Remove the front bearing.

TIP:

Remove the front bearing using a press.

Impeller check

1. Check the impeller. Replace if damaged.

Crankshaft holder 20: 90890-06552

Stopper guide plate: 90890-06501

Bearing puller assembly: 90890-06535

Stopper guide stand: 90890-06538

Driver rod L3: 90890-06652

Needle bearing attachment: 90890-06614

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Bote de Yamaha

Yamaha

Yamaha VX110Sport Manual de usuario

Yamaha

Yamaha XLT800 WaveRunner 2004 Manual del propietario

Yamaha

Yamaha XL700 WaveRunner 2003 Manual del propietario

Yamaha

Yamaha WaveRunner VX Cruiser HO 2020 Manual del propietario

Yamaha

Yamaha WaveRunner FZR 2012 Manual del propietario

Yamaha

Yamaha 2017 WaveRunner EX Manual del propietario

Yamaha

Yamaha EXCITER SE Manual de usuario

Yamaha

Yamaha WaveRunner SuperJet 2015 Manual de usuario

Yamaha

Yamaha GP1200R WaveRunner 2001 Manual del propietario

Yamaha

Yamaha WaveRunner VX 2015 Manual de usuario

Yamaha

Yamaha XL700 WaveRunner 2004 Manual del propietario

Yamaha

Yamaha FX HO Manual del propietario

Yamaha

Yamaha GP800R WaveRunner 2003 Manual del propietario

Yamaha

Yamaha FX140 Manual de usuario

Yamaha

Yamaha VX/VX Sport Manual de usuario

Yamaha

Yamaha WaveRunner GP1300R Manual

Yamaha

Yamaha WaveRunner SUV SV1200X Manual de usuario

Yamaha

Yamaha WaveRunner VXS 2014 Manual del propietario

Yamaha

Yamaha GP800R WaveRunner 2004 Manual del propietario

Yamaha

Yamaha LST1200X1999 Manual de usuario

Yamaha

Yamaha XLT1200 WaveRunner 2003 Manual de usuario

Yamaha

Yamaha LX2000 Manual de usuario

Yamaha

Yamaha LS2000 Manual de usuario

Yamaha

Yamaha FX140 Manual de usuario

Manuales populares de Bote de otras marcas

Raymarine

Raymarine ST70 Instrument Manual de usuario

Pro-Line Boats

Pro-Line Boats Pro Line 19 Sport Manual de usuario

Jeanneau

Jeanneau CAP CAMARAT 8.5 CC Manual de usuario

Tiara Yachts

Tiara Yachts C49 2024 Manual de usuario

Monterey Boats

Monterey Boats Sport Yacht 330 Manual de usuario

J 105 Manual de usuario

PURSUIT

PURSUIT OS 335 Manual de usuario

Boston Whaler

Boston Whaler CONQUEST 345 Manual de usuario

Jeanneau

Jeanneau SUN ODYSSEY 41 DS Manual de usuario

Meridian

Meridian 490 Pilothouse Manual de usuario

Advanced Elements

Advanced Elements AdvancedFrame Expedition AE1009 Manual de usuario

Robo Marine Indonesia

Robo Marine Indonesia GEOMAR Manual de usuario

Swallow Boats

Swallow Boats BayRaider Manual de usuario

Intex

Intex Excursion 5 Set Manual de usuario

X SHORE

X SHORE EELEX 8000 Manual de usuario

ISLAND PACKET

ISLAND PACKET 370 Manual de usuario

Sea Ray

Sea Ray 175 Sport Manual de usuario

Regal

Regal 2300 Manual de usuario